EagleTac: Difference between revisions
(update links to light-reviews) |
|||
| (5 intermediate revisions by 2 users not shown) | |||
| Line 7: | Line 7: | ||
EagleTac has three different ways of quoting lumen output for its lights: emitter lumens, out-the-front (OTF), or [[ANSI-NEMA FL-1|ANSI]] FL-1, so be careful when comparing light outputs of different versions. If the output type isn't listed, it is probably emitter lumens which they used up until late 2010. | EagleTac has three different ways of quoting lumen output for its lights: emitter lumens, out-the-front (OTF), or [[ANSI-NEMA FL-1|ANSI]] FL-1, so be careful when comparing light outputs of different versions. If the output type isn't listed, it is probably emitter lumens which they used up until late 2010. | ||
'''D25 Clicky Series''' This is a series of lights with the same user interface. All are 10-mode reverse clicky flashlights with 3 constant modes in addition to 7 flashy modes available by cycling through the constant modes twice. When switched to High, the light will be in Turbo mode for 90 seconds before backing down to High. With the head loosened, all 10 modes are available. With the head tightened, the modes alternate between Turbo and Strobe. A group of lower modes (Moonlight, Low, Med instead of Low, Medium, High) is available by twisting the head back and forth three times from the loosened position. Mode memory is optional via three twists from the tightened position. Originally this light was introduced with five different | '''D25 Clicky Series''' This is a series of lights with the same user interface. All are 10-mode reverse clicky flashlights with 3 constant modes in addition to 7 flashy modes available by cycling through the constant modes twice. When switched to High, the light will be in Turbo mode for 90 seconds before backing down to High. With the head loosened, all 10 modes are available. With the head tightened, the modes alternate between Turbo and Strobe. A group of lower modes (Moonlight, Low, Med instead of Low, Medium, High) is available by twisting the head back and forth three times from the loosened position. Mode memory is optional via three twists from the tightened position. Originally this light was introduced with five different LEDs available: Cree XM-L U2, Cree XP-G S2, or the new Cree XT-E R5 in addition to neutral Cree XM-L T6 and Cree XP-G R4. However the initial batch of XT-E lights were recalled due to problems with beam quality. In September 2012 EagleTac announced that Cree XP-G2 LEDs would be available. In April 2013 lights with the Cree XM-L2 were available. A clicky body was also made available to allow people who had twisty D25 mini's to convert their light to a clicky. The clicky series was introduced in May 2012. | ||
:'''D25A Clicky''' 1xAA with a Cree XM-L U2 LED, output is 0.5, 8, 75, and 122 ANSI lumens on Turbo. With a Cree XP-G S2, output is 0.5, 9, 71, or 110 lumens. The XM-L2 U2 version, introduced in April 2013, has maximum output of 141 ANSI lumens. On a lithium-ion 14500 battery the light loses the lower modes. Also available in a titanium version. Introduced in May 2012. [http://www.eagletac.com/html/d25arc/specs.html Web page]. | :'''D25A Clicky''' 1xAA with a Cree XM-L U2 LED, output is 0.5, 8, 75, and 122 ANSI lumens on Turbo. With a Cree XP-G S2, output is 0.5, 9, 71, or 110 lumens. The XM-L2 U2 version, introduced in April 2013, has maximum output of 141 ANSI lumens. On a lithium-ion 14500 battery the light loses the lower modes. Also available in a titanium version. Introduced in May 2012. [http://www.eagletac.com/html/d25arc/specs.html Web page]. | ||
:'''D25A2 Clicky''' 2xAA with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI lumens on Turbo. With a Cree XP-G S2, output is 0.5, 22, 149, or 219 lumens. The XM-L2 U2 LED version, introduced in April 2013, has output levels of 0.5, 24, 211, or 318 ANSI lumens. [http://www. | :'''D25A2 Clicky''' 2xAA with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI lumens on Turbo. With a Cree XP-G S2, output is 0.5, 22, 149, or 219 lumens. The XM-L2 U2 LED version, introduced in April 2013, has output levels of 0.5, 24, 211, or 318 ANSI lumens. [http://www.eagtac.com/index.php/product/d25a-clicky-mkii/ Web page]. | ||
:'''D25C Clicky''' 1xCR123A with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI lumens. With the XP-G S2 LED output is 0.5, 22, 149, or 219 lumens. The April 2013 version with Cree XM-L2 has maximum output of 317 ANSI lumens (also in neutral). Neutral | :'''D25C Clicky''' 1xCR123A with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI lumens. With the XP-G S2 LED output is 0.5, 22, 149, or 219 lumens. The April 2013 version with Cree XM-L2 has maximum output of 317 ANSI lumens (also in neutral). Neutral LEDs will have 7-10% lower output. [http://www.eagtac.com/index.php/product/d25c-clicky-mkii/ Web page for D25C mkII]. | ||
:'''D25C2 Clicky''' 2xCR123A or 1x17670 with a Cree XM-L U2 LED, output is 5, 50, 370, or 548 ANSI lumens on Turbo. The XP-G S2 output is 5, 32, 238, or 344 lumens. Also available in titanium. [http://www.eagletac.com/html/d25c2rc/specs.html Web page]. | :'''D25C2 Clicky''' 2xCR123A or 1x17670 with a Cree XM-L U2 LED, output is 5, 50, 370, or 548 ANSI lumens on Turbo. The XP-G S2 output is 5, 32, 238, or 344 lumens. Also available in titanium. [http://www.eagletac.com/html/d25c2rc/specs.html Web page]. | ||
:'''D25LC2 Clicky''' 2xCR123A or 1x18650 with a Cree XM-L U2 LED, output is 5, 50, 370, or 548 ANSI lumens on Turbo. The XP-G S2 output is 5, 32, 238, or 344 lumens. The XM-L2 U2 version, introduced in April 2013, has modes of 6, 52, 412, and 621 ANSI lumens (a T6 neutral white version is available with 7% less output). This light is slightly wider and comes with a sleeve for 2xCR123A use to avoid battery rattle. [http://www.eagletac.com/html/d25lc2rc/specs.html Web page | :'''D25LC2 Clicky''' 2xCR123A or 1x18650 with a Cree XM-L U2 LED, output is 5, 50, 370, or 548 ANSI lumens on Turbo. The XP-G S2 output is 5, 32, 238, or 344 lumens. The XM-L2 U2 version, introduced in April 2013, has modes of 6, 52, 412, and 621 ANSI lumens (a T6 neutral white version is available with 7% less output). This light is slightly wider and comes with a sleeve for 2xCR123A use to avoid battery rattle. [http://www.eagletac.com/html/d25lc2rc/specs.html Web page]. | ||
'''D25A Mini 1''' 8-mode 1xAA twisty with a Cree XP-G S2 LED and output of 3, 19, or 86 ANSI lumens. Turbo mode for the first 90 seconds on High gives 110 lumens. Additional flashing modes are hidden by cycling through the 3 modes quickly two times in a row. Introduced in August 2011. A titanium version with a Cree XM-L U2 (125 OTF lumens max) or XP-G S2 LED was announced in December 2011. [http://www.eagletac.com/html/d25am/specs.html Web page]. | '''D25A Mini 1''' 8-mode 1xAA twisty with a Cree XP-G S2 LED and output of 3, 19, or 86 ANSI lumens. Turbo mode for the first 90 seconds on High gives 110 lumens. Additional flashing modes are hidden by cycling through the 3 modes quickly two times in a row. Introduced in August 2011. A titanium version with a Cree XM-L U2 (125 OTF lumens max) or XP-G S2 LED was announced in December 2011. [http://www.eagletac.com/html/d25am/specs.html Web page]. | ||
| Line 23: | Line 23: | ||
'''D25A2 Mini 2''' 8-mode 2xAA twisty with a Cree XP-G S2 LED and output of 3, 60, or 176 ANSI lumens. Turbo mode for the first 90 seconds on High gives 209 lumens. Additional flashing modes are hidden by cycling through the 3 modes quickly two times in a row. Introduced in August 2011. [http://www.eagletac.com/html/d25a2m/specs.html Web page]. | '''D25A2 Mini 2''' 8-mode 2xAA twisty with a Cree XP-G S2 LED and output of 3, 60, or 176 ANSI lumens. Turbo mode for the first 90 seconds on High gives 209 lumens. Additional flashing modes are hidden by cycling through the 3 modes quickly two times in a row. Introduced in August 2011. [http://www.eagletac.com/html/d25a2m/specs.html Web page]. | ||
'''D25C Mini 1''' 8-mode 1xCR123A twisty with a Cree XP-G S2 LED and output of 3, 60, or 176 ANSI lumens. Turbo mode for the first 90 seconds on High gives 209 lumens. Additional flashing modes are hidden by cycling through the 4 modes quickly two times in a row. Introduced in August 2011. A titanium version with a Cree XM-L U2 (255 OTF lumens max) or XP-G S2 LED was announced in December 2011. [http://www.eagletac.com/html/d25cm/specs.html Web page]. | '''D25C Mini 1''' 8-mode 1xCR123A twisty with a Cree XP-G S2 LED and output of 3, 60, or 176 ANSI lumens. Turbo mode for the first 90 seconds on High gives 209 lumens. Additional flashing modes are hidden by cycling through the 4 modes quickly two times in a row. Introduced in August 2011. A titanium version with a Cree XM-L U2 (255 OTF lumens max) or XP-G S2 LED was announced in December 2011. [http://www.eagletac.com/html/d25cm/specs.html Web page]. | ||
'''D25C2 Mini 2''' 9-mode 2xCR123A or 1x18650 twisty with a Cree XP-G S2 LED and output of 3, 24, 131, or 295 ANSI lumens. Turbo mode for the first 90 seconds on High gives 343 lumens. Additional flashing modes are hidden by cycling through the 4 modes quickly two times in a row. Introduced in August 2011. [http://www.eagletac.com/html/d25c2m/index.html Web page]. | '''D25C2 Mini 2''' 9-mode 2xCR123A or 1x18650 twisty with a Cree XP-G S2 LED and output of 3, 24, 131, or 295 ANSI lumens. Turbo mode for the first 90 seconds on High gives 343 lumens. Additional flashing modes are hidden by cycling through the 4 modes quickly two times in a row. Introduced in August 2011. [http://www.eagletac.com/html/d25c2m/index.html Web page]. | ||
'''D25LC2 Mini 2''' Slightly larger in diameter than the D25C2 (for better throw), this is a 9-mode 1xCR123A or 1x18650 twisty with a Cree XP-G S2 LED and output of 3, 24, 131, or 295 ANSI lumens. Turbo mode for the first 90 seconds on High gives 343 lumens. Additional flashing modes are hidden by cycling through the 4 modes quickly two times in a row. Introduced in August 2011. [http://www.eagletac.com/html/d25lc2m/specs.html Web page]. | '''D25LC2 Mini 2''' Slightly larger in diameter than the D25C2 (for better throw), this is a 9-mode 1xCR123A or 1x18650 twisty with a Cree XP-G S2 LED and output of 3, 24, 131, or 295 ANSI lumens. Turbo mode for the first 90 seconds on High gives 343 lumens. Additional flashing modes are hidden by cycling through the 4 modes quickly two times in a row. Introduced in August 2011. [http://www.eagletac.com/html/d25lc2m/specs.html Web page]. | ||
'''G25C2 Mark II''' 4-mode 2xCR123A or 1x18650 light. Modes are selected by rotating the bezel. Extension tubes are available to allow 3 or 4 CR123A or 2 18650's. Modes are 7, 75, 389, or 856 ANSI lumens with a Cree XM-L U2 (284m throw) or 6, 71, 370, or 795 lumens with a neutral white Cree XM-L T6. The Cree XM-L2 U2 version with maximum output of 980 ANSI lumens was introduced in April 2013. An alternative set of modes including two strobe modes is available as well as some hidden flashy modes. [http://www. | '''G25C2 Mark II''' 4-mode 2xCR123A or 1x18650 light. Modes are selected by rotating the bezel. Extension tubes are available to allow 3 or 4 CR123A or 2 18650's. Modes are 7, 75, 389, or 856 ANSI lumens with a Cree XM-L U2 (284m throw) or 6, 71, 370, or 795 lumens with a neutral white Cree XM-L T6. The Cree XM-L2 U2 version with maximum output of 980 ANSI lumens was introduced in April 2013. An alternative set of modes including two strobe modes is available as well as some hidden flashy modes. [http://www.eagtac.com/index.php/product/g25c2-mkii/ Web page]. | ||
'''GX25A3''' - 4-mode 3xAA side clicky light. Modes are selected by rotating the head. With a Cree XM-L2 U2 LED, introduced in April 2013, the output levels are 9, 301, 832, and a 915 ANSI lumen Turbo mode. Hidden flashy modes also available. A neutral version with XM-L2 T6 is available with 7% less output. [http://www. | '''GX25A3''' - 4-mode 3xAA side clicky light. Modes are selected by rotating the head. With a Cree XM-L2 U2 LED, introduced in April 2013, the output levels are 9, 301, 832, and a 915 ANSI lumen Turbo mode. Hidden flashy modes also available. A neutral version with XM-L2 T6 is available with 7% less output. [http://www.eagtac.com/index.php/product/gx25a3/ Web page]. | ||
'''GX25L2''' - 4-mode 4xCR123A or 2x18650 side clicky light which includes a charger port. Modes are selected by rotating the head. With a Cree XM-L U2 LED the output levels are 8, 78, 401, and 870 lumens (resets to 765 lumens after the light has been on for a short time). A neutral white Cree XM-L T6 LED is also available with 7% less output. An alternative set of 4 modes (with two strobe modes) is available as well as several hidden flashy modes. Announced in September 2012. [http://www.eagletac.com/html/gx25l2/specs.html Web page]. | '''GX25L2''' - 4-mode 4xCR123A or 2x18650 side clicky light which includes a charger port. Modes are selected by rotating the head. With a Cree XM-L U2 LED the output levels are 8, 78, 401, and 870 lumens (resets to 765 lumens after the light has been on for a short time). A neutral white Cree XM-L T6 LED is also available with 7% less output. An alternative set of 4 modes (with two strobe modes) is available as well as several hidden flashy modes. Announced in September 2012. [http://www.eagletac.com/html/gx25l2/specs.html Web page]. | ||
'''GX25L2 Turbo''' - Turbo version of GX25L2 has larger 62mm head (opposed to 39.5mm on the regular version) for greater throw | '''GX25L2 Turbo''' - Turbo version of GX25L2 has larger 62mm head (opposed to 39.5mm on the regular version) for greater throw. | ||
'''M3C4''' 5-mode 2x18650 or 4xCR123A light with large reflector and selector ring for modes. Also has 3 hidden flashing modes. The light has a modular reflector for either 3 separate | '''M3C4''' 5-mode 2x18650 or 4xCR123A light with large reflector and selector ring for modes. Also has 3 hidden flashing modes. The light has a modular reflector for either 3 separate LEDs or one central LED. A single Cree XM-L2 U2 LED has maximum output of 1020 ANSI lumens. The version with 3 Cree XM-L2 U2 LEDs has maximum output of 1348 ANSI lumens. [[Luminus]] SST-50 version maximum output of 800 [[Terminology#OTF|OTF]] lumens as does the 3 Cree XP-G R5 version. 3 Cree XR-E R2 version is 600 lumens. 3 Cree XR-E Q4 neutral white has somewhat less. Cree MC-E cool white version is 625 lumens while a warm white version has less. A version with a Cree XM-L LED was announced in December 2010 with 748 ANSI lumens. Reviews: [http://www.candlepowerforums.com/vb/showthread.php?296381 Selfbuilt (SST-50)], [http://www.candlepowerforums.com/vb/showthread.php?t=306590 Selfbuilt (XM-L)] | ||
'''MX25L2''' - 4-mode side clicky light which includes a charger port for a 2x32650 battery pack. Modes are selected by rotating the head. With a Luminus SST-90 N3 LED the output levels are 14, 156, 792, or 2120 ANSI lumens (resets to 1890 lumens after the light has been on for a short time). A Luminus SBT-90 MB has 45% less output but greater throw. An alternative set of 4 modes (with two strobe modes) is available as well as several hidden flashy modes. Announced in September 2012. [http://www.eagletac.com/html/mx25l2/specs.html Web page]. | '''MX25L2''' - 4-mode side clicky light which includes a charger port for a 2x32650 battery pack. Modes are selected by rotating the head. With a Luminus SST-90 N3 LED the output levels are 14, 156, 792, or 2120 ANSI lumens (resets to 1890 lumens after the light has been on for a short time). A Luminus SBT-90 MB has 45% less output but greater throw. An alternative set of 4 modes (with two strobe modes) is available as well as several hidden flashy modes. Announced in September 2012. [http://www.eagletac.com/html/mx25l2/specs.html Web page]. | ||
'''MX25L2 Turbo''' Turbo version has larger head (92mm opposed to 62mm) than the regular MX25L2 for greater throw | '''MX25L2 Turbo''' Turbo version has larger head (92mm opposed to 62mm) than the regular MX25L2 for greater throw. | ||
''' | '''MX25L3''' 4-mode 3x18650 or 6xCR123A side clicky has output levels of 1054, 648, 99, or 4 lumens (1245 lumens available temporarily as Turbo) and 573m throw (with Cree XM-L2) plus a tactical group of modes that includes strobe. A version with a Cree MT-G2 LED was also available. The MX25L3 is similar to the SX25L3 but with a larger head. | ||
''' | '''P100A2''' - 2xAA 2-mode forward clicky with Cree XP-E Q5. Two output levels selected by turning the head: 195 lumens on turbo, 55 lumens on low. Also available with XP-E Q4 neutral white LED. 25 mm x 155 mm long. Compact cylindrical shape with diamond knurling. | ||
''' | '''P100C2''' - 2xCR123A 2-mode forward clicky with Cree XP-E Q5. Two output levels selected by turning the head: 220 lumens on turbo, 55 lumens on low. Also available with XP-E Q4 neutral white LED. Compact cylindrical shape with diamond knurling. | ||
'''P20C2 Mark II''' - 2xCR123A, 2x16340, or 1x17670 forward clicky 2-mode light with Cree XP-G R5 has output of 300 or 60 lumens (now measured out-the-front instead of at LED as in the past) with additional modes available by quickly tightening and loosening the head (alternate mode is not remembered). When turned on in High, the light will be at Turbo for the first 3 minutes. The XP-G S2 version has output of 375 OTF lumens. In April 2013, a version with Cree XM-L2 U2 LED was introduced with output levels of 8, 101, 470, and 622 ANSI lumens. The Mark II offers ET21 drop-ins so users can swap out reflectors or emitters. Reflectors are smooth or orange peel. Other emitters include neutral white (XP-E Q4), red, blue, green, and infrared. [http://www.eagletac.com/html/p20c2/specs.html Web page] [http://www.eagletac.com/download/readme/p20mkii_readme.pdf Manual] Reviews: [http://www.candlepowerforums.com/vb/showthread.php?t=272036 Selfbuilt | '''P20A2 Mark II''' - 2xAA 2-mode light with Cree XP-G R5 has output of 230 or 60 lumens (now measured out-the-front instead of at LED as in the past). With Cree XM-L2 U2 LED, introduced in April 2013, the output levels are 8, 58, 263, and 329 ANSI lumens. The Mark II offers ET21 drop-ins so users can swap out reflectors or emitters. Reflectors are smooth or orange peel. Other emitters include infrared, neutral white (XP-E Q4), and colors. Low and flashing modes are hidden but can be activated through a new UI. [http://www.eagletac.com/html/p20a2/specs.html Web page]. [http://www.eagletac.com/download/readme/p20mkii_readme.pdf Manual]. Reviews: [http://www.candlepowerforums.com/vb/showthread.php?t=272036 Selfbuilt] | ||
'''P20C2 Mark II''' - 2xCR123A, 2x16340, or 1x17670 forward clicky 2-mode light with Cree XP-G R5 has output of 300 or 60 lumens (now measured out-the-front instead of at LED as in the past) with additional modes available by quickly tightening and loosening the head (alternate mode is not remembered). When turned on in High, the light will be at Turbo for the first 3 minutes. The XP-G S2 version has output of 375 OTF lumens. In April 2013, a version with Cree XM-L2 U2 LED was introduced with output levels of 8, 101, 470, and 622 ANSI lumens. The Mark II offers ET21 drop-ins so users can swap out reflectors or emitters. Reflectors are smooth or orange peel. Other emitters include neutral white (XP-E Q4), red, blue, green, and infrared. [http://www.eagletac.com/html/p20c2/specs.html Web page] [http://www.eagletac.com/download/readme/p20mkii_readme.pdf Manual] Reviews: [http://www.candlepowerforums.com/vb/showthread.php?t=272036 Selfbuilt] | |||
'''PN20A''' - 1xAAA 2-mode twisty with Cree XP-E R2 has maximum output of 70 OTF lumens. Also available with a XP-E Q4 neutral white LED with 5A tint. Part of the personal nano series. | '''PN20A''' - 1xAAA 2-mode twisty with Cree XP-E R2 has maximum output of 70 OTF lumens. Also available with a XP-E Q4 neutral white LED with 5A tint. Part of the personal nano series. | ||
'''PN20A2''' - 2xAAA 2-mode twisty with Cree XP-E R2 has maximum output of 100 OTF lumens. Also available with a XP-E Q4 neutral white LED with 5A tint. Part of the personal nano series. [http://www.eagletac.com/html/pn20a2/specs.html Web page]. | '''PN20A2''' - 2xAAA 2-mode twisty with Cree XP-E R2 has maximum output of 100 OTF lumens. Also available with a XP-E Q4 neutral white LED with 5A tint. Part of the personal nano series. [http://www.eagletac.com/html/pn20a2/specs.html Web page]. | ||
'''S200C2''' - 2xCR123A or 1x18650 3-mode tail clicky with Cree XM-L2 LED and a large head for better throw. Output levels for cool white XM-L2 are 913, 264, or 9 ANSI lumens and 417 yards of throw claimed. Neutral white XM-L2 also available with somewhat less output. | |||
'''SX25L2''' - 4-mode side clicky light which includes a charger port for a 2x26650 battery pack. Modes are selected by rotating the head. With a Cree XM-L U2 LED the output levels are 9, 88, 458, or 925 lumens (resets to 828 lumens after the light has been on for a short time). A neutral white Cree XM-L T6 LED is also available with 7% less output. The XM-L2 U2 version, introduced in April 2013, has output levels of 9, 439, 939, and 1049 lumens. An alternative set of 4 modes (with two strobe modes) is available as well as several hidden flashy modes. Announced in September 2012. [http://www.eagletac.com/html/sx25l2/specs.html Web page]. | '''SX25L2''' - 4-mode side clicky light which includes a charger port for a 2x26650 battery pack. Modes are selected by rotating the head. With a Cree XM-L U2 LED the output levels are 9, 88, 458, or 925 lumens (resets to 828 lumens after the light has been on for a short time). A neutral white Cree XM-L T6 LED is also available with 7% less output. The XM-L2 U2 version, introduced in April 2013, has output levels of 9, 439, 939, and 1049 lumens. An alternative set of 4 modes (with two strobe modes) is available as well as several hidden flashy modes. Announced in September 2012. [http://www.eagletac.com/html/sx25l2/specs.html Web page]. | ||
| Line 61: | Line 65: | ||
'''SX25A6''' 4-mode 6xAA side clicky light. Modes are selected by rotating the head to 3 positions. With a Cree XM-L U2 LED the output levels are 9, 386, 828 ANSI lumens with Turbo mode of 925 lumens by holding the power button. Several hidden flashy modes also available. Introduced in January 2013. In April 2013, a version with Cree XM-L2 U2 LED was introduced with maximum output of 1049 ANSI lumens (other modes are 9, 439, and 932 lumens). [http://www.eagletac.com/html/sx25a6/specs.html Web page]. Review: [http://www.candlepowerforums.com/vb/showthread.php?359236 selfbuilt] | '''SX25A6''' 4-mode 6xAA side clicky light. Modes are selected by rotating the head to 3 positions. With a Cree XM-L U2 LED the output levels are 9, 386, 828 ANSI lumens with Turbo mode of 925 lumens by holding the power button. Several hidden flashy modes also available. Introduced in January 2013. In April 2013, a version with Cree XM-L2 U2 LED was introduced with maximum output of 1049 ANSI lumens (other modes are 9, 439, and 932 lumens). [http://www.eagletac.com/html/sx25a6/specs.html Web page]. Review: [http://www.candlepowerforums.com/vb/showthread.php?359236 selfbuilt] | ||
'''T100C2 Mark II''' - 2xCR123A, 2x16340, or 18650 2-mode forward clicky with Cree XP-E Q5 LED. Two output levels selected by turning the head: 220 lumens on turbo, 55 lumens on low. 31 mm x 141 mm long. Available with either a smooth or orange peel reflector. The Mark II version has a thicker bezel. Differs from P100C2 having a slightly larger head for better throw and a wider body to accept 18650 cells. Compact cylindrical shape with diamond knurling. [http://www.eagletac.com/html/t100c2/specs.html Web Page] Reviews: [http://www.candlepowerforums.com/vb/showthread.php?t=239366 Selfbuilt | '''T100C2 Mark II''' - 2xCR123A, 2x16340, or 18650 2-mode forward clicky with Cree XP-E Q5 LED. Two output levels selected by turning the head: 220 lumens on turbo, 55 lumens on low. 31 mm x 141 mm long. Available with either a smooth or orange peel reflector. The Mark II version has a thicker bezel. Differs from P100C2 having a slightly larger head for better throw and a wider body to accept 18650 cells. Compact cylindrical shape with diamond knurling. [http://www.eagletac.com/html/t100c2/specs.html Web Page] Reviews: [http://www.candlepowerforums.com/vb/showthread.php?t=239366 Selfbuilt] | ||
'''T20C2 Mark II''' - 2xCR123A or 18650. Cree XP-G R5 has output of 300, 60, and 5 OTF lumens. The XP-G S2 version has output of 375, 60, and 5 OTF lumens. The Cree XM-L T6 version has maximum output of 580 ANSI lumens. The Cree XM-L2 U2 version, introduced in April 2013, has output levels of 10, 101, and and 681 ANSI lumens. The Mark II offers ET28 drop-ins so users can swap out reflectors or emitters. Reflectors are smooth or orange peel. Emitters include infrared, neutral white (XP-E Q4), and colors. Flashing modes are hidden but can be activated through a new UI. [http://www.eagletac.com/html/t20c2/specs.html Web page]. [http://www.eagletac.com/download/readme/t20c2mkii_readme.pdf Manual]. | '''T20C2 Mark II''' - 2xCR123A or 18650. Cree XP-G R5 has output of 300, 60, and 5 OTF lumens. The XP-G S2 version has output of 375, 60, and 5 OTF lumens. The Cree XM-L T6 version has maximum output of 580 ANSI lumens. The Cree XM-L2 U2 version, introduced in April 2013, has output levels of 10, 101, and and 681 ANSI lumens. The Mark II offers ET28 drop-ins so users can swap out reflectors or emitters. Reflectors are smooth or orange peel. Emitters include infrared, neutral white (XP-E Q4), and colors. Flashing modes are hidden but can be activated through a new UI. [http://www.eagletac.com/html/t20c2/specs.html Web page]. [http://www.eagletac.com/download/readme/t20c2mkii_readme.pdf Manual]. | ||
'''TX25C2''' - 4-mode 4xCR123A or 2x18650 side clicky light. Modes are selected by rotating the head to 3 positions. With a Cree XM-L U2 LED the output levels are 7, 388, 658 ANSI lumens with Turbo mode of 852 lumens by holding the power button. A neutral white Cree XM-L T6 LED is also available with 7% less output. In April 2013, a version with Cree XM-L2 U2 LED was introduced with output levels of 7, 459, 746, and 965 ANSI lumens (also a T6 neutral white version with 7% less output). Several hidden flashy modes also available. Similar to the G25C2, but with a smaller 31.5 mm diameter head. Introduced in January 2013. [http://www.eagletac.com/html/tx25c2/specs.html Web page]. | '''TX25C2''' - 4-mode 4xCR123A or 2x18650 side clicky light. Modes are selected by rotating the head to 3 positions. With a Cree XM-L U2 LED the output levels are 7, 388, 658 ANSI lumens with Turbo mode of 852 lumens by holding the power button. A neutral white Cree XM-L T6 LED is also available with 7% less output. In April 2013, a version with Cree XM-L2 U2 LED was introduced with output levels of 7, 459, 746, and 965 ANSI lumens (also a T6 neutral white version with 7% less output). Several hidden flashy modes also available. Similar to the G25C2, but with a smaller 31.5 mm diameter head. Introduced in January 2013. [http://www.eagletac.com/html/tx25c2/specs.html Web page]. | ||
| Line 71: | Line 75: | ||
'''G25C2''' 4-mode 2xCR123A or 1x18650 light with a Cree XM-L U2 LED. Modes are selected by rotating the bezel. Extension tubes are available to allow 3 or 4 CR123A or 2 18650's. Modes are 640 and 72 ANSI lumens with strobe and random strobe or can be programmed to a group with 640, 267. 49, or 2 lumens and no flashy modes. Introduced in December 2011. | '''G25C2''' 4-mode 2xCR123A or 1x18650 light with a Cree XM-L U2 LED. Modes are selected by rotating the bezel. Extension tubes are available to allow 3 or 4 CR123A or 2 18650's. Modes are 640 and 72 ANSI lumens with strobe and random strobe or can be programmed to a group with 640, 267. 49, or 2 lumens and no flashy modes. Introduced in December 2011. | ||
'''M2C4''' - SSC P7 D-bin quad-die [[LED]]. | '''M2C4''' - SSC P7 D-bin quad-die [[LED]]. | ||
'''M2SC4''' - [[Cree]] MC-E M-bin (also available with neutral white Cree MC-E K-bin) | '''M2SC4''' - [[Cree]] MC-E M-bin (also available with neutral white Cree MC-E K-bin) | ||
'''M2XC4''' Cluster of 3 Cree Q3 XR-E | '''M2XC4''' Cluster of 3 Cree Q3 XR-E LEDs. Reviews: | ||
'''P10A''' - 1xAA 2-mode forward clicky. Output with Cree XR-E Q5 is 130 lumens on high, 37 on low. Select modes by tightening or loosening head. 26 mm head. | '''P10A''' - 1xAA 2-mode forward clicky. Output with Cree XR-E Q5 is 130 lumens on high, 37 on low. Select modes by tightening or loosening head. 26 mm head. | ||
'''P10A2''' - 2xAA 2-mode forward clicky. Output with Cree XR-E Q5 is 220 lumens on high, 60 on low. Select modes by tightening or loosening head. 26 mm head. | '''P10A2''' - 2xAA 2-mode forward clicky. Output with Cree XR-E Q5 is 220 lumens on high, 60 on low. Select modes by tightening or loosening head. 26 mm head. | ||
'''P10C''' - 1xCR123A 2-mode forward clicky. Output with Cree XR-E Q5 is 220 lumens on high, 60 on low. Select modes by tightening or loosening head. 26 mm head. | '''P10C''' - 1xCR123A 2-mode forward clicky. Output with Cree XR-E Q5 is 220 lumens on high, 60 on low. Select modes by tightening or loosening head. 26 mm head. | ||
'''P10C2''' - 2xCR123A or 1x18650 2-mode forward clicky. Output with Cree XR-E Q5 is 295 lumens on high, 60 on low. Select modes by tightening or loosening head. 26 mm head. | '''P10C2''' - 2xCR123A or 1x18650 2-mode forward clicky. Output with Cree XR-E Q5 is 295 lumens on high, 60 on low. Select modes by tightening or loosening head. 26 mm head. | ||
'''P20A2''' - 2xAA 4-mode foward clicky. Cree XR-E R2 WD tint has output levels of 300, 60, and 5 lumens (measured at the emitter) by turning bezel. Tactical strobe is available with a double-press of the power button. Neutral white version also available with XR-E Q4, 5A tint (200, 60, and 15 lumens). | '''P20A2''' - 2xAA 4-mode foward clicky. Cree XR-E R2 WD tint has output levels of 300, 60, and 5 lumens (measured at the emitter) by turning bezel. Tactical strobe is available with a double-press of the power button. Neutral white version also available with XR-E Q4, 5A tint (200, 60, and 15 lumens). | ||
'''P20C2''' - 2xCR123A 4-mode foward clicky. Cree XR-E R2 WD tint has output levels of 230, 60, and 15 lumens (measured at the emitter) by turning bezel with a tactical strobe available with a double-click. Neutral white version also available with XR-E Q4, 5A tint (200, 60, and 15 lumens). | '''P20C2''' - 2xCR123A 4-mode foward clicky. Cree XR-E R2 WD tint has output levels of 230, 60, and 15 lumens (measured at the emitter) by turning bezel with a tactical strobe available with a double-click. Neutral white version also available with XR-E Q4, 5A tint (200, 60, and 15 lumens). | ||
'''T10C''' - 1xCR123A 2-mode forward clicky. Output with Cree XR-E Q5 is 220 lumens on high, 60 on low. Select modes by tightening or loosening head. Tapered 33mm head for better throw. | '''T10C''' - 1xCR123A 2-mode forward clicky. Output with Cree XR-E Q5 is 220 lumens on high, 60 on low. Select modes by tightening or loosening head. Tapered 33mm head for better throw. | ||
'''T10C2''' - 2xCR123A or 1x18650 2-mode forward clicky. Output with Cree XR-E Q5 is 295 lumens on high, 60 on low. Select modes by tightening or loosening head. Tapered 33mm head for better throw. | '''T10C2''' - 2xCR123A or 1x18650 2-mode forward clicky. Output with Cree XR-E Q5 is 295 lumens on high, 60 on low. Select modes by tightening or loosening head. Tapered 33mm head for better throw. | ||
'''T10L''' - 2xCR123A or 1x18650 2-mode forward clicky. Output with Cree XR-E Q5 is 255 lumens on high, 60 on low. Select modes by tightening or loosening head. Tapered 33mm head for better throw. | '''T10L''' - 2xCR123A or 1x18650 2-mode forward clicky. Output with Cree XR-E Q5 is 255 lumens on high, 60 on low. Select modes by tightening or loosening head. Tapered 33mm head for better throw. | ||
'''T10LC2''' - 2xCR123A or 1x18650 2-mode forward clicky. Output with Cree XR-E Q5 is 295 lumens on high, 60 on low. Select modes by tightening or loosening head. | '''T10LC2''' - 2xCR123A or 1x18650 2-mode forward clicky. Output with Cree XR-E Q5 is 295 lumens on high, 60 on low. Select modes by tightening or loosening head. | ||
'''T20C2''' - 2xCR123A or 18650 4-mode foward clicky. Cree XR-E R2 WD tint has output levels of 300, 60, and 5 lumens (measured at the emitter) by turning bezel with a tactical strobe available with a double-click. Neutral white version also available. | '''T20C2''' - 2xCR123A or 18650 4-mode foward clicky. Cree XR-E R2 WD tint has output levels of 300, 60, and 5 lumens (measured at the emitter) by turning bezel with a tactical strobe available with a double-click. Neutral white version also available. Reviews: [http://www.candlepowerforums.com/vb/showthread.php?t=239321 Selfbuilt] | ||
==Popular Dealers== | ==Popular Dealers== | ||
Latest revision as of 07:51, 9 August 2022
EagleTac is a company based in Arizona, but lights are produced in China. website
Flashlights
Current Lights
EagleTac has three different ways of quoting lumen output for its lights: emitter lumens, out-the-front (OTF), or ANSI FL-1, so be careful when comparing light outputs of different versions. If the output type isn't listed, it is probably emitter lumens which they used up until late 2010.
D25 Clicky Series This is a series of lights with the same user interface. All are 10-mode reverse clicky flashlights with 3 constant modes in addition to 7 flashy modes available by cycling through the constant modes twice. When switched to High, the light will be in Turbo mode for 90 seconds before backing down to High. With the head loosened, all 10 modes are available. With the head tightened, the modes alternate between Turbo and Strobe. A group of lower modes (Moonlight, Low, Med instead of Low, Medium, High) is available by twisting the head back and forth three times from the loosened position. Mode memory is optional via three twists from the tightened position. Originally this light was introduced with five different LEDs available: Cree XM-L U2, Cree XP-G S2, or the new Cree XT-E R5 in addition to neutral Cree XM-L T6 and Cree XP-G R4. However the initial batch of XT-E lights were recalled due to problems with beam quality. In September 2012 EagleTac announced that Cree XP-G2 LEDs would be available. In April 2013 lights with the Cree XM-L2 were available. A clicky body was also made available to allow people who had twisty D25 mini's to convert their light to a clicky. The clicky series was introduced in May 2012.
- D25A Clicky 1xAA with a Cree XM-L U2 LED, output is 0.5, 8, 75, and 122 ANSI lumens on Turbo. With a Cree XP-G S2, output is 0.5, 9, 71, or 110 lumens. The XM-L2 U2 version, introduced in April 2013, has maximum output of 141 ANSI lumens. On a lithium-ion 14500 battery the light loses the lower modes. Also available in a titanium version. Introduced in May 2012. Web page.
- D25A2 Clicky 2xAA with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI lumens on Turbo. With a Cree XP-G S2, output is 0.5, 22, 149, or 219 lumens. The XM-L2 U2 LED version, introduced in April 2013, has output levels of 0.5, 24, 211, or 318 ANSI lumens. Web page.
- D25C Clicky 1xCR123A with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI lumens. With the XP-G S2 LED output is 0.5, 22, 149, or 219 lumens. The April 2013 version with Cree XM-L2 has maximum output of 317 ANSI lumens (also in neutral). Neutral LEDs will have 7-10% lower output. Web page for D25C mkII.
- D25C2 Clicky 2xCR123A or 1x17670 with a Cree XM-L U2 LED, output is 5, 50, 370, or 548 ANSI lumens on Turbo. The XP-G S2 output is 5, 32, 238, or 344 lumens. Also available in titanium. Web page.
- D25LC2 Clicky 2xCR123A or 1x18650 with a Cree XM-L U2 LED, output is 5, 50, 370, or 548 ANSI lumens on Turbo. The XP-G S2 output is 5, 32, 238, or 344 lumens. The XM-L2 U2 version, introduced in April 2013, has modes of 6, 52, 412, and 621 ANSI lumens (a T6 neutral white version is available with 7% less output). This light is slightly wider and comes with a sleeve for 2xCR123A use to avoid battery rattle. Web page.
D25A Mini 1 8-mode 1xAA twisty with a Cree XP-G S2 LED and output of 3, 19, or 86 ANSI lumens. Turbo mode for the first 90 seconds on High gives 110 lumens. Additional flashing modes are hidden by cycling through the 3 modes quickly two times in a row. Introduced in August 2011. A titanium version with a Cree XM-L U2 (125 OTF lumens max) or XP-G S2 LED was announced in December 2011. Web page.
D25A2 Mini 2 8-mode 2xAA twisty with a Cree XP-G S2 LED and output of 3, 60, or 176 ANSI lumens. Turbo mode for the first 90 seconds on High gives 209 lumens. Additional flashing modes are hidden by cycling through the 3 modes quickly two times in a row. Introduced in August 2011. Web page.
D25C Mini 1 8-mode 1xCR123A twisty with a Cree XP-G S2 LED and output of 3, 60, or 176 ANSI lumens. Turbo mode for the first 90 seconds on High gives 209 lumens. Additional flashing modes are hidden by cycling through the 4 modes quickly two times in a row. Introduced in August 2011. A titanium version with a Cree XM-L U2 (255 OTF lumens max) or XP-G S2 LED was announced in December 2011. Web page.
D25C2 Mini 2 9-mode 2xCR123A or 1x18650 twisty with a Cree XP-G S2 LED and output of 3, 24, 131, or 295 ANSI lumens. Turbo mode for the first 90 seconds on High gives 343 lumens. Additional flashing modes are hidden by cycling through the 4 modes quickly two times in a row. Introduced in August 2011. Web page.
D25LC2 Mini 2 Slightly larger in diameter than the D25C2 (for better throw), this is a 9-mode 1xCR123A or 1x18650 twisty with a Cree XP-G S2 LED and output of 3, 24, 131, or 295 ANSI lumens. Turbo mode for the first 90 seconds on High gives 343 lumens. Additional flashing modes are hidden by cycling through the 4 modes quickly two times in a row. Introduced in August 2011. Web page.
G25C2 Mark II 4-mode 2xCR123A or 1x18650 light. Modes are selected by rotating the bezel. Extension tubes are available to allow 3 or 4 CR123A or 2 18650's. Modes are 7, 75, 389, or 856 ANSI lumens with a Cree XM-L U2 (284m throw) or 6, 71, 370, or 795 lumens with a neutral white Cree XM-L T6. The Cree XM-L2 U2 version with maximum output of 980 ANSI lumens was introduced in April 2013. An alternative set of modes including two strobe modes is available as well as some hidden flashy modes. Web page.
GX25A3 - 4-mode 3xAA side clicky light. Modes are selected by rotating the head. With a Cree XM-L2 U2 LED, introduced in April 2013, the output levels are 9, 301, 832, and a 915 ANSI lumen Turbo mode. Hidden flashy modes also available. A neutral version with XM-L2 T6 is available with 7% less output. Web page.
GX25L2 - 4-mode 4xCR123A or 2x18650 side clicky light which includes a charger port. Modes are selected by rotating the head. With a Cree XM-L U2 LED the output levels are 8, 78, 401, and 870 lumens (resets to 765 lumens after the light has been on for a short time). A neutral white Cree XM-L T6 LED is also available with 7% less output. An alternative set of 4 modes (with two strobe modes) is available as well as several hidden flashy modes. Announced in September 2012. Web page.
GX25L2 Turbo - Turbo version of GX25L2 has larger 62mm head (opposed to 39.5mm on the regular version) for greater throw.
M3C4 5-mode 2x18650 or 4xCR123A light with large reflector and selector ring for modes. Also has 3 hidden flashing modes. The light has a modular reflector for either 3 separate LEDs or one central LED. A single Cree XM-L2 U2 LED has maximum output of 1020 ANSI lumens. The version with 3 Cree XM-L2 U2 LEDs has maximum output of 1348 ANSI lumens. Luminus SST-50 version maximum output of 800 OTF lumens as does the 3 Cree XP-G R5 version. 3 Cree XR-E R2 version is 600 lumens. 3 Cree XR-E Q4 neutral white has somewhat less. Cree MC-E cool white version is 625 lumens while a warm white version has less. A version with a Cree XM-L LED was announced in December 2010 with 748 ANSI lumens. Reviews: Selfbuilt (SST-50), Selfbuilt (XM-L)
MX25L2 - 4-mode side clicky light which includes a charger port for a 2x32650 battery pack. Modes are selected by rotating the head. With a Luminus SST-90 N3 LED the output levels are 14, 156, 792, or 2120 ANSI lumens (resets to 1890 lumens after the light has been on for a short time). A Luminus SBT-90 MB has 45% less output but greater throw. An alternative set of 4 modes (with two strobe modes) is available as well as several hidden flashy modes. Announced in September 2012. Web page.
MX25L2 Turbo Turbo version has larger head (92mm opposed to 62mm) than the regular MX25L2 for greater throw.
MX25L3 4-mode 3x18650 or 6xCR123A side clicky has output levels of 1054, 648, 99, or 4 lumens (1245 lumens available temporarily as Turbo) and 573m throw (with Cree XM-L2) plus a tactical group of modes that includes strobe. A version with a Cree MT-G2 LED was also available. The MX25L3 is similar to the SX25L3 but with a larger head.
P100A2 - 2xAA 2-mode forward clicky with Cree XP-E Q5. Two output levels selected by turning the head: 195 lumens on turbo, 55 lumens on low. Also available with XP-E Q4 neutral white LED. 25 mm x 155 mm long. Compact cylindrical shape with diamond knurling.
P100C2 - 2xCR123A 2-mode forward clicky with Cree XP-E Q5. Two output levels selected by turning the head: 220 lumens on turbo, 55 lumens on low. Also available with XP-E Q4 neutral white LED. Compact cylindrical shape with diamond knurling.
P20A2 Mark II - 2xAA 2-mode light with Cree XP-G R5 has output of 230 or 60 lumens (now measured out-the-front instead of at LED as in the past). With Cree XM-L2 U2 LED, introduced in April 2013, the output levels are 8, 58, 263, and 329 ANSI lumens. The Mark II offers ET21 drop-ins so users can swap out reflectors or emitters. Reflectors are smooth or orange peel. Other emitters include infrared, neutral white (XP-E Q4), and colors. Low and flashing modes are hidden but can be activated through a new UI. Web page. Manual. Reviews: Selfbuilt
P20C2 Mark II - 2xCR123A, 2x16340, or 1x17670 forward clicky 2-mode light with Cree XP-G R5 has output of 300 or 60 lumens (now measured out-the-front instead of at LED as in the past) with additional modes available by quickly tightening and loosening the head (alternate mode is not remembered). When turned on in High, the light will be at Turbo for the first 3 minutes. The XP-G S2 version has output of 375 OTF lumens. In April 2013, a version with Cree XM-L2 U2 LED was introduced with output levels of 8, 101, 470, and 622 ANSI lumens. The Mark II offers ET21 drop-ins so users can swap out reflectors or emitters. Reflectors are smooth or orange peel. Other emitters include neutral white (XP-E Q4), red, blue, green, and infrared. Web page Manual Reviews: Selfbuilt
PN20A - 1xAAA 2-mode twisty with Cree XP-E R2 has maximum output of 70 OTF lumens. Also available with a XP-E Q4 neutral white LED with 5A tint. Part of the personal nano series.
PN20A2 - 2xAAA 2-mode twisty with Cree XP-E R2 has maximum output of 100 OTF lumens. Also available with a XP-E Q4 neutral white LED with 5A tint. Part of the personal nano series. Web page.
S200C2 - 2xCR123A or 1x18650 3-mode tail clicky with Cree XM-L2 LED and a large head for better throw. Output levels for cool white XM-L2 are 913, 264, or 9 ANSI lumens and 417 yards of throw claimed. Neutral white XM-L2 also available with somewhat less output.
SX25L2 - 4-mode side clicky light which includes a charger port for a 2x26650 battery pack. Modes are selected by rotating the head. With a Cree XM-L U2 LED the output levels are 9, 88, 458, or 925 lumens (resets to 828 lumens after the light has been on for a short time). A neutral white Cree XM-L T6 LED is also available with 7% less output. The XM-L2 U2 version, introduced in April 2013, has output levels of 9, 439, 939, and 1049 lumens. An alternative set of 4 modes (with two strobe modes) is available as well as several hidden flashy modes. Announced in September 2012. Web page.
SX25L2 Turbo - Turbo version has larger head (62 mm compared to 47 mm) than the SX25L2 for greater throw. Web page.
SX25A6 4-mode 6xAA side clicky light. Modes are selected by rotating the head to 3 positions. With a Cree XM-L U2 LED the output levels are 9, 386, 828 ANSI lumens with Turbo mode of 925 lumens by holding the power button. Several hidden flashy modes also available. Introduced in January 2013. In April 2013, a version with Cree XM-L2 U2 LED was introduced with maximum output of 1049 ANSI lumens (other modes are 9, 439, and 932 lumens). Web page. Review: selfbuilt
T100C2 Mark II - 2xCR123A, 2x16340, or 18650 2-mode forward clicky with Cree XP-E Q5 LED. Two output levels selected by turning the head: 220 lumens on turbo, 55 lumens on low. 31 mm x 141 mm long. Available with either a smooth or orange peel reflector. The Mark II version has a thicker bezel. Differs from P100C2 having a slightly larger head for better throw and a wider body to accept 18650 cells. Compact cylindrical shape with diamond knurling. Web Page Reviews: Selfbuilt
T20C2 Mark II - 2xCR123A or 18650. Cree XP-G R5 has output of 300, 60, and 5 OTF lumens. The XP-G S2 version has output of 375, 60, and 5 OTF lumens. The Cree XM-L T6 version has maximum output of 580 ANSI lumens. The Cree XM-L2 U2 version, introduced in April 2013, has output levels of 10, 101, and and 681 ANSI lumens. The Mark II offers ET28 drop-ins so users can swap out reflectors or emitters. Reflectors are smooth or orange peel. Emitters include infrared, neutral white (XP-E Q4), and colors. Flashing modes are hidden but can be activated through a new UI. Web page. Manual.
TX25C2 - 4-mode 4xCR123A or 2x18650 side clicky light. Modes are selected by rotating the head to 3 positions. With a Cree XM-L U2 LED the output levels are 7, 388, 658 ANSI lumens with Turbo mode of 852 lumens by holding the power button. A neutral white Cree XM-L T6 LED is also available with 7% less output. In April 2013, a version with Cree XM-L2 U2 LED was introduced with output levels of 7, 459, 746, and 965 ANSI lumens (also a T6 neutral white version with 7% less output). Several hidden flashy modes also available. Similar to the G25C2, but with a smaller 31.5 mm diameter head. Introduced in January 2013. Web page.
Past Lights
G25C2 4-mode 2xCR123A or 1x18650 light with a Cree XM-L U2 LED. Modes are selected by rotating the bezel. Extension tubes are available to allow 3 or 4 CR123A or 2 18650's. Modes are 640 and 72 ANSI lumens with strobe and random strobe or can be programmed to a group with 640, 267. 49, or 2 lumens and no flashy modes. Introduced in December 2011.
M2C4 - SSC P7 D-bin quad-die LED.
M2SC4 - Cree MC-E M-bin (also available with neutral white Cree MC-E K-bin)
M2XC4 Cluster of 3 Cree Q3 XR-E LEDs. Reviews:
P10A - 1xAA 2-mode forward clicky. Output with Cree XR-E Q5 is 130 lumens on high, 37 on low. Select modes by tightening or loosening head. 26 mm head.
P10A2 - 2xAA 2-mode forward clicky. Output with Cree XR-E Q5 is 220 lumens on high, 60 on low. Select modes by tightening or loosening head. 26 mm head.
P10C - 1xCR123A 2-mode forward clicky. Output with Cree XR-E Q5 is 220 lumens on high, 60 on low. Select modes by tightening or loosening head. 26 mm head.
P10C2 - 2xCR123A or 1x18650 2-mode forward clicky. Output with Cree XR-E Q5 is 295 lumens on high, 60 on low. Select modes by tightening or loosening head. 26 mm head.
P20A2 - 2xAA 4-mode foward clicky. Cree XR-E R2 WD tint has output levels of 300, 60, and 5 lumens (measured at the emitter) by turning bezel. Tactical strobe is available with a double-press of the power button. Neutral white version also available with XR-E Q4, 5A tint (200, 60, and 15 lumens).
P20C2 - 2xCR123A 4-mode foward clicky. Cree XR-E R2 WD tint has output levels of 230, 60, and 15 lumens (measured at the emitter) by turning bezel with a tactical strobe available with a double-click. Neutral white version also available with XR-E Q4, 5A tint (200, 60, and 15 lumens).
T10C - 1xCR123A 2-mode forward clicky. Output with Cree XR-E Q5 is 220 lumens on high, 60 on low. Select modes by tightening or loosening head. Tapered 33mm head for better throw.
T10C2 - 2xCR123A or 1x18650 2-mode forward clicky. Output with Cree XR-E Q5 is 295 lumens on high, 60 on low. Select modes by tightening or loosening head. Tapered 33mm head for better throw.
T10L - 2xCR123A or 1x18650 2-mode forward clicky. Output with Cree XR-E Q5 is 255 lumens on high, 60 on low. Select modes by tightening or loosening head. Tapered 33mm head for better throw.
T10LC2 - 2xCR123A or 1x18650 2-mode forward clicky. Output with Cree XR-E Q5 is 295 lumens on high, 60 on low. Select modes by tightening or loosening head.
T20C2 - 2xCR123A or 18650 4-mode foward clicky. Cree XR-E R2 WD tint has output levels of 300, 60, and 5 lumens (measured at the emitter) by turning bezel with a tactical strobe available with a double-click. Neutral white version also available. Reviews: Selfbuilt
Popular Dealers
EagleTacUSA is the official North American distributor of EagleTac products. This website is part of Pacific Tactical Solutions who sell other brands too. Frequently have discounts for CPF members.
FlashlightsNGear has other brands as well. Based in West Virginia. Discounts available through the CPF Good Deals thread (requires registration).