Seoul Semiconductor: Difference between revisions
(replace LED's with LEDs) |
|||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Seoul Semiconductor Co., Ltd. is a Korean company that produces | Seoul Semiconductor Co., Ltd. is a Korean company that produces LEDs. Their P4 and P7 LEDs were used in a number of flashlights though these are fairly old and do not appear to have been updated. | ||
==P4 LED== | ==P4 LED== | ||
The P4 uses [[Cree]]'s EZ1000 die and has similar performance to the Cree XR-E LED. Do not confuse the Cree P4 bin (brightness) with the SSC P4 LED. The SSC P4 LED was much used as a "drop in" replacement for Lumileds Luxeon 3 LEDs. It gave about twice the output for about three times as long on the same battery and driver as a Luxeon 3. It had the same die height and beam pattern as the Luxeon 3 which the then new Cree LEDs did not. | [[File:Sscp4.jpg|thumb|SSC P4 LED]]The P4 uses [[Cree]]'s EZ1000 die and has similar performance to the Cree XR-E LED. Do not confuse the Cree P4 bin (brightness) with the SSC P4 LED. The SSC P4 LED was much used as a "drop in" replacement for Lumileds Luxeon 3 LEDs. It gave about twice the output for about three times as long on the same battery and driver as a Luxeon 3. It had the same die height and beam pattern as the Luxeon 3 which the then new Cree LEDs did not. | ||
[http://www.seoulsemicon.com/en/product/prd/zpowerLEDp4.asp P4 web page] | [http://www.seoulsemicon.com/en/product/prd/zpowerLEDp4.asp P4 web page] | ||
| Line 26: | Line 26: | ||
==P7 LED== | ==P7 LED== | ||
[[File:sscp7led.jpg|thumb|SSC P7 LED]]The P7 is a multi-die LED utilizing four P4 | [[File:sscp7led.jpg|thumb|SSC P7 LED]]The P7 is a multi-die LED utilizing four P4 LEDs. P7 LEDs have bin names that indicate brightness, color tint, and forward voltage. For instance a DSXOI bin indicates brightness level D, color SXO, and forward voltage of I. [http://www.seoulsemicon.com/en/product/prd/zpowerLEDp7.asp P7 web page] | ||
Brightness: Usually C or D where C is 700-800 lumens and D is 800-900 lumens (measured at 2.8 amps), but really there is some overlap where a low-end D might be less bright than a high-end C. | Brightness: Usually C or D where C is 700-800 lumens and D is 800-900 lumens (measured at 2.8 amps), but really there is some overlap where a low-end D might be less bright than a high-end C. | ||
Color: A common cool white color bin is SXO, while SWO is | Color: A common cool white color bin is SXO (6700K), while SWO is not as cool (6050K), and SVN is almost neutral (5350K). See chart below for all of the SSC tint bins and color temperatures, though not all bins on the chart are actually available. | ||
Forward voltage: I and J are common. I is 3.25-3.50V and J is 3.50-3.75V, again with some overlap possible. | Forward voltage: I and J are common. I is 3.25-3.50V and J is 3.50-3.75V, again with some overlap possible. | ||
| Line 53: | Line 53: | ||
==Tint bins== | ==Tint bins== | ||
[[File:Ssctints.jpg|thumb|400px|SSC's tint bins]]SSC does not use the [[ANSI White]] standard, but comparisons can still be made by using the color temperatures shown on the chart at the right. For more information on binning see the Binning and Labeling guides available at the product links listed above. | [[File:Ssctints.jpg|thumb|400px|SSC's tint bins]]SSC does not use the [[ANSI White]] standard, but comparisons can still be made by using the color temperatures shown on the chart at the right. The bins used here only cover the first 3 or 4 cooler white quadrangles of ANSI White. For more information on binning see the Binning and Labeling guides available at the product links listed above. | ||
Latest revision as of 12:28, 25 January 2014
Seoul Semiconductor Co., Ltd. is a Korean company that produces LEDs. Their P4 and P7 LEDs were used in a number of flashlights though these are fairly old and do not appear to have been updated.
P4 LED
The P4 uses Cree's EZ1000 die and has similar performance to the Cree XR-E LED. Do not confuse the Cree P4 bin (brightness) with the SSC P4 LED. The SSC P4 LED was much used as a "drop in" replacement for Lumileds Luxeon 3 LEDs. It gave about twice the output for about three times as long on the same battery and driver as a Luxeon 3. It had the same die height and beam pattern as the Luxeon 3 which the then new Cree LEDs did not.
| Bin | 350mA | 1000mA |
|---|---|---|
| S1 | 54-60 | 127-141 |
| S2 | 60-70 | 141-165 |
| T1 | 70-80 | 165-188 |
| T2 | 80-91 | 188-214 |
| U1 | 91-100 | 214-235 |
| U2* | 100-109 | 235-256 |
| U3 | 109-119 | 256-280 |
P7 LED
The P7 is a multi-die LED utilizing four P4 LEDs. P7 LEDs have bin names that indicate brightness, color tint, and forward voltage. For instance a DSXOI bin indicates brightness level D, color SXO, and forward voltage of I. P7 web page
Brightness: Usually C or D where C is 700-800 lumens and D is 800-900 lumens (measured at 2.8 amps), but really there is some overlap where a low-end D might be less bright than a high-end C.
Color: A common cool white color bin is SXO (6700K), while SWO is not as cool (6050K), and SVN is almost neutral (5350K). See chart below for all of the SSC tint bins and color temperatures, though not all bins on the chart are actually available.
Forward voltage: I and J are common. I is 3.25-3.50V and J is 3.50-3.75V, again with some overlap possible.
The dies are manufactured for SSC by Cree, but the phosphor is SSC's own. Many prefer the P7 to the Cree MC-E which has the same dies but different phosphors and optics.
| Bin | 1400mA | 2800mA |
|---|---|---|
| A | 251-326 | 440-570 |
| B | 326-400 | 570-700 |
| C | 400-457 | 700-800 |
| D* | 457-514 | 800-900 |
| E | 514-629 | 900-1100 |
Tint bins
SSC does not use the ANSI White standard, but comparisons can still be made by using the color temperatures shown on the chart at the right. The bins used here only cover the first 3 or 4 cooler white quadrangles of ANSI White. For more information on binning see the Binning and Labeling guides available at the product links listed above.