Sunwayman

Sunwayman is based in China, formerly known as Sunwayled. They previously manufactured lights for other companies, but now have their own line of lights.

http://www.sunwayman.com/html/index2.html

Sunwayman lights use ANSI/NEMA FL-1 ratings for their lumens (but some of their advertised lumen values don't make much sense). Most of their lights are dark gray or black anodizing. But in July 2011, they posted pictures of anniversary editions with a red control ring along with gold, gunmetal, and tan versions of some of their lights. The tan version is a limited edition of 100 lights.

Lights

4xAA Sunwayman D40A with Cree XM-L2 and dual control switches

C10A - 1xAA 4-mode with Cree XP-G R5 and mode memory. Modes are selected by holding down the rear clicky with strobe available with a double-click. Output is 3, 30, and 130 lumens.

C10R "Torpedo" 1xCR123A 5-mode side clicky with Cree XM-L U2 LED. Modes are 190, 50, and 3 lumens plus SOS and Strobe.

C20C "Tomahawk" 2xCR123A or 1x18650 6-mode side clicky light with Cree XM-L U2 LED. Modes are 450, 280, 95, and 15 lumens. The 450-lumen Turbo mode reverts to High after 5 minutes to avoid overheating. Also has a low battery indicator light on the side. Introduced in July 2012.

C21C "Thunder Hammer" 2xCR123A or 1x18650 light with a Cree XM-L2 in the head and a Cree XP-E P2 red LED on the side of the head. Use the electronic switch to control modes of either LED. XM-L2 has Turbo output of 830 lumens (188m throw) as well as 510, 130, and 42 lumens in addition to Strobe and SOS. Red LED has maximum output of 98 lumens as well as 63, and 14 lumens in addition to Strobe and SOS. Introduced in September 2013.

D40A 4xAA 4-mode light with dual electronic side clickies for power and modes. Maximum output is 980 lumens (315m throw) with a Cree XM-L2 as well as 550, 220, and 30 lumens along with Strobe, SOS, Police Strobe, and Aviation Signal and Moon modes. Also available with a neutral white XM-L2 LED. From Off, holding down the power switch allows immediate access to a Moonlight mode of about 1 lumen. Holding down the mode switch from Off gives you a strobe mode. Reviews: Selfbuilt, relic38

L Series angle Lights

L10A - 1xAA 4-mode angle light with Cree XR-E R2 LED. Switch is mounted on top of the L. Change modes with a double-click, press and hold for strobe. Output levels are 3, 30, and 130 lumens.

L10C - 1xCR123A 4-mode angle light with Cree XR-E R2 LED. Switch is mounted on top of the L. Change modes with a double-click, press and hold for strobe. Output levels are 4, 20, and 190 lumens.

M Series with magnetic selector ring

M10A - 1xAA 4-mode forward clicky with a magnetic selector ring at the bezel. With a Cree XP-G R5 the output levels are 4, 40, and 140 lumens plus strobe. The Cree XM-L T6 version has modes of 4, 40, and 110 lumens (210 lumens with li-ion), introduced in December 2011.

M10R - 1xCR123A 4-mode forward clicky with a magnetic selector ring at the bezel. With a Cree XR-E R2 the output levels are 4, 60, and 190 lumens plus strobe. With a Cree XP-G R5 the ouput levels are 4, 60, and 190 lumens plus strobe. The Cree XM-L T6 version has output levels of 4, 55, and 160 lumens (210 lumens with li-ion), introduced in December 2011. Review: Selfbuilt

M11R - 1xCR123A 3-mode Cree XM-L U2 light with a magnetic selector ring at the bezel. With CR123A battery, the modes are 4, 60, and 180 lumens (230 lumens available with 16340 li-ion battery). Strobe and SOS are available by switching back and forth from High to Medium. Unlike the M10R, the M11R does not have a clicky and Off is controlled by the selector. Introduced in March 2012. In July 2012 a "premium edition" with a neutral white Cree XM-L T6 4C, available in tan or natural (olive).

M20A - 2xAA 4-mode forward clicky with a magnetic selector ring at the bezel. With a Cree XP-G R5 the output levels are 4, 70, and 200 lumens plus strobe. The Cree XM-L has output levels of 4, 70, and 160 lumens (210 lumens with 1 li-ion and 1 dummy cell), introduced in December 2011.

M20C - 2xCR123A/1x18650 4-mode forward clicky with a magnetic selector ring at the bezel. With a Cree XR-E R2 the output levels are 12, 40, and 240 lumens plus strobe. With a Cree XP-G R5 the output levels are 13, 50, and 280 lumens plus strobe. Review: Selfbuilt

M30A - 3xAA 4-mode forward clicky with a magnetic selector ring at the bezel. Batteries are bundled side-by-side in a carrier. With a Cree XR-E R2 the output levels are 7, 80, and 240 lumens. Strobe is 240 lumens.

M30R - 3xCR123A 4-mode forward clicky with a magnetic selector ring at the bezel. Batteries are bundled side-by-side in a carrier. T6 version has a Cree XM-L T6. Output levels are 50, 240, and 800 lumens plus strobe. Previous version with a Luminus SST-50 LED has output levels of 13, 180, and 800 lumens plus strobe.

M30A - 3xAA 4-mode forward clicky with a magnetic selector ring at the bezel. Batteries are bundled side-by-side in a carrier. With a Cree XR-E R2 the output levels are 7, 80, and 240 lumens. Strobe is 240 lumens.

M40A - 4xAA 4-mode with a magnetic selector ring at the bezel. Batteries held in a carrier side-by-side. With a Cree MC-E the output levels are 15, 150, and 500 lumens plus strobe. The Cree XM-L T6 version has output of 30, 200, and 600 lumens. Unlike other M-series lights, there is no tail clicky and power is controlled only by the selector ring. Reviews: Selfbuilt, HKJ LumensReview

M40C - 4xCR123A/2x18650 6-mode forward clicky with a magnetic selector ring at the bezel. Batteries held in carrier 2 wide by 2 long. Around the outside of the reflector are a number of small 5mm red and blue LEDs. There is a red low battery indicator light on the bezel. With a Cree MC-E LED the output levels are 45, 165, and 630 lumens. The other modes are red and blue light. Strobe is 800 lumens. Reviews: Selfbuilt, Light Reviews, HKJ

M60C "Panther" 6xCR123A/3x18650 9-mode selector ring light with 3 Cree XM-L2 LEDs for maximum output of 2500 lumens. Can be charged using optional charging base. Output levels are 2, 40, 550, 1100, and 2500 lumens in addition to strobe, SOS, police strobe, and aviation signal. Introduced in March 2013.

M60R - 6xCR123A 4-mode forward clicky with a magnetic selector ring at the bezel. Batteries are bundled with 3 batteries side-by-side by 2 batteries long (can also run from 2 or 4 batteries with same output). Output levels are 50, 240, and 800 lumens plus strobe. Previous version with a Luminus SST-50 LED has output levels of 13, 180, and 800 lumens plus strobe.

R Series

R01A - 1xAAA twisty with a 5mm LED. This light was included as a bonus pack-in with the V20C. Later sold separately. Output is 10 lumens.

R10A "Elegance" 1xAA 2-mode forward clicky light with Cree XP-G2 R5. With AA battery, modes are 30 and 140 lumens; with 14500 li-ion battery, modes are 50 and 205 lumens. Introduced in March 2013.

R10R "Elegance" 1xCR123A 2-mode forward clicky light with Cree XP-G2 R5. Output levels are 30 and 205 lumens. Introduced in March 2013.

R20A - 2xAA 4-mode reverse clicky with a Cree XP-G R5. Modes are 180, 37, and 4 lumens as well as strobe. Introduced in August 2011.

T Series

T20C 2xCR123A/1x18650 4-mode forward clicky with a Cree XM-L T6 the output levels are 10, 70, 438 lumens plus strobe. Modes are changed via the tail switch instead of a selector ring. Introduced in April 2011. Review: turboBB

T20CS 2xCR123A/1x18650 6-mode light with a Cree XM-L U2. Has a forward clicky on the rear and a side clicky near the head for changing modes. Modes are 18, 92, 476, and 658 lumens plus SOS and Strobe. Has a low battery indicator on the side. Introduced in December 2011.

T21CS 2xCR123A/1x18650 6-mode light with a Cree XM-L U3. Has a forward clicky on the rear and a side clicky near the head for changing modes. Modes are 8, 75, 350, and 600 lumens plus SOS and Strobe. Has a low battery indicator and charging port (for 18650 only) on the side. Introduced in March 2013.

T40CS 4xCR123A/2x18650 5-mode dual click (tail and side) with a Cree XM-L T6 the output levels are 788 (500m throw), 220, and 20 lumens with strobe and SOS. This is a big light with a large reflector for throw. The forward clicky tail switch turns the light on High. The side switch turns the light on in a memorized mode. Announced in September 2011.

T45C 4xCR123A/2x18650 8-mode side clicky light with a Cree XM-L2 LED. Output levels are 980 lumens (278m throw), 470, 220, and 20 lumens in addition to Strobe, SOS, Police Strobe, and Slow Flash. Batteries are side-by-side in parallel so light can be run with only 1 18650. Has cutouts in head of light for cooling. Introduced in September 2013.

T60CS 6xCR123A/3x18650 6-mode side clicky with 3 Cree XM-L U2 LEDs. Modes are 2100, 1680, 360, and 20 lumens plus SOS and Strobe. Turbo mode of 2100 lumens reverts to High after 5 minutes to avoid overheating. Has a low voltage indicator on the side. There is a charging stand available. Introduced in June 2012.

V Series with variable output

Sunwayman V10A with Cree XP-G R5

V10A - 1xAA forward clicky with Cree XP-G R5 and a variable selector ring for 1 to 140 lumens output (looks like the M10A, but does not have preset brightness levels and accepts li-ion batteries). Introduced in December 2010. The Cree XM-L T6 version has maximum output of 110 lumens on AA but 460 lumens on li-ion, introduced in December 2011. Review: Selfbuilt

V10R - 1xCR123A forward clicky with Cree XP-G R5 and a variable selector ring for 1 to 210 lumens output. Also available in a titanium version that looks very similar to JETBeam's TCR2. The aluminum and titanium version were introduced in December 2010. A special anniversary edition (only 80 pieces) with a neutral Cree XM-L T5 LED and a red selector ring was announced in September 2011 with 408 lumens maximum output. The Cree XM-L T6 version has maximum output of 160 lumens on a CR123A (460 lumen on li-ion), introduced in December 2011.

V11R révolution - 1xCR123A forward clicky light with Cree XM-L U2 and a variable selector ring for 1-190 lumens on CR123A and up to 500 lumens using a li-ion 16340. The V11R has a metal tail clicky and features more knurling than the V10R. An optional extender allows the use of AA or 14500 li-ion cells. Introduced in April 2012. A limited edition high CRI version with a warm tinted XM-L T4 was introduced in April 2012. Review: 1lumen.com

V20A - 2xAA forward clicky with Cree XP-G R5 and a variable selector ring for 1 to 210 lumens output. Introduced in December 2010. A special anniversary edition (80 pieces) with a neutral Cree XM-L T5 LED and a red selector ring was announced in September 2011 with 150 lumens maximum output (you can get 408 lumens by using a 14500 li-ion battery plus a dummy cell). The Cree XM-L T6 version has maximum output of 160 lumens on 2 AA's (460 lumens on 1 li-ion and 1 dummy cell), introduced in December 2011.

V20C - 2xCR123A/1x18650 forward clicky with Cree XM-L T6 and a variable selector ring for 0.5 to 438 lumens output. Introduced in June 2011. Review: Light Reviews

V25C - 2xCR123A/1x18650 forward clicky with Cree XM-L2 and a variable selector ring that rotates 360 degrees for 0.1 to 780 lumens output. Review: Selfbuilt

V60C - 3x18650/6xCR123A Cree XM-L T6 light with a selector ring for output of 0.1 to 728 lumens (395m throw). Introduced in August 2011. web page

Popular Dealers

Battery Junction has all the Sunwayman lights in addition to many other brands of flashlights. Discount available in the CPF Good Deals thread (requires registration).