AVR Drivers: Difference between revisions

Line 113:

avrdude done. Thank you.

So if you get that, check your clip wiring and make sure your clip is getting a good connection. The clips are very finicky and sometimes need some repairs. You can check continuity with a DMM from an individual tooth on the clip back to the pad on the USB board.

So if you get that, check your clip wiring and make sure your clip is getting a good connection. The clips are very finicky and sometimes need some repairs. You can check continuity with a DMM from an individual tooth on the clip back to the pad on the USB board. TIP: In the command prompt window you can use the up arrow key to recall the last command you typed in.

If everything is working you will get a message like the following:

@@ Line 113: / Line 113: @@
    avrdude done.  Thank you.
-So if you get that, check your clip wiring and make sure your clip is getting a good connection. The clips are very finicky and sometimes need some repairs. You can check continuity with a DMM from an individual tooth on the clip back to the pad on the USB board.
+So if you get that, check your clip wiring and make sure your clip is getting a good connection. The clips are very finicky and sometimes need some repairs. You can check continuity with a DMM from an individual tooth on the clip back to the pad on the USB board. TIP: In the command prompt window you can use the up arrow key to recall the last command you typed in.
 If everything is working you will get a message like the following:

AVR Drivers: Difference between revisions

Navigation menu

Search