Sunwayman

Sunwayman is based in China, formerly known as Sunwayled. They previously manufactured lights for other companies, but now have their own line of lights.

http://www.sunwayman.com/html/index2.html

Sunwayman lights use ANSI/NEMA FL-1 ratings for their lumens. Most of their lights are dark gray or black anodizing. But in July 2011, they posted pictures of anniversary editions with a red control ring along with gold, gunmetal, and tan versions of some of their lights. The tan version is a limited edition of 100 lights.

Lights

C10A - 1xAA 4-mode with Cree XP-G R5 and mode memory. Modes are selected by holding down the rear clicky with strobe available with a double-click. Output is 3, 30, and 130 lumens.

L Series angle Lights

L10A - 1xAA 4-mode angle light with Cree XR-E R2 LED. Switch is mounted on top of the L. Change modes with a double-click, press and hold for strobe. Output levels are 3, 30, and 130 lumens.

L10C - 1xCR123A 4-mode angle light with Cree XR-E R2 LED. Switch is mounted on top of the L. Change modes with a double-click, press and hold for strobe. Output levels are 4, 20, and 190 lumens.

M Series with magnetic selector ring

M10A - 1xAA 4-mode forward clicky with a magnetic selector ring at the bezel. With a Cree XP-G R5 the output levels are 4, 40, and 140 lumens plus strobe.

M10R - 1xCR123A 4-mode forward clicky with a magnetic selector ring at the bezel. With a Cree XR-E R2 the output levels are 4, 60, and 190 lumens plus strobe. With a Cree XP-G R5 the ouput levels are 4, 60, and 190 lumens plus strobe. Review: Selfbuilt

M20A - 2xAA 4-mode forward clicky with a magnetic selector ring at the bezel. With a Cree XP-G R5 the output levels are 4, 70, and 200 lumens plus strobe.

M20C - 2xCR123A/1x18650 4-mode forward clicky with a magnetic selector ring at the bezel. With a Cree XR-E R2 the output levels are 12, 40, and 240 lumens plus strobe. With a Cree XP-G R5 the output levels are 13, 50, and 280 lumens plus strobe. Review: Selfbuilt

M30A - 3xAA 4-mode forward clicky with a magnetic selector ring at the bezel. Batteries are bundled side-by-side in a carrier. With a Cree XR-E R2 the output levels are 7, 80, and 240 lumens. Strobe is 240 lumens.

M30R - 3xCR123A 4-mode forward clicky with a magnetic selector ring at the bezel. Batteries are bundled side-by-side in a carrier. T6 version has a Cree XM-L T6. Output levels are 50, 240, and 800 lumens plus strobe. Previous version with a Luminus SST-50 LED has output levels of 13, 180, and 800 lumens plus strobe.

M30A - 3xAA 4-mode forward clicky with a magnetic selector ring at the bezel. Batteries are bundled side-by-side in a carrier. With a Cree XR-E R2 the output levels are 7, 80, and 240 lumens. Strobe is 240 lumens.

M40A - 4xAA 4-mode with a magnetic selector ring at the bezel. Batteries held in a carrier side-by-side. With a Cree MC-E the output levels are 15, 150, and 500 lumens plus strobe. Unlike other M-series lights, there is no tail clicky and power is controlled only by the selector ring. Reviews: Selfbuilt, HKJ LumensReview

M40C - 4xCR123A/2x18650 6-mode forward clicky with a magnetic selector ring at the bezel. Batteries held in carrier 2 wide by 2 long. Around the outside of the reflector are a number of small 5mm red and blue LED's. There is a red low battery indicator light on the bezel. With a Cree MC-E LED the output levels are 45, 165, and 630 lumens. The other modes are red and blue light. Strobe is 800 lumens. Reviews: Selfbuilt, Light Reviews, HKJ

M60R - 6xCR123A 4-mode forward clicky with a magnetic selector ring at the bezel. Batteries are bundled with 3 batteries side-by-side by 2 batteries long (can also run from 2 or 4 batteries with same output). Output levels are 50, 240, and 800 lumens plus strobe. Previous version with a Luminus SST-50 LED has output levels of 13, 180, and 800 lumens plus strobe.

R Series

R01A - 1xAAA twisty with a 5mm LED. This light was included as a bonus pack-in with the V20C.

T Series changes modes with tail switch

T20C 2xCR123A/1x18650 4-mode forward clicky with a Cree XM-L T6 the output levels are 10, 70, 438 lumens plus strobe. Modes are changed via the tail switch instead of a selector ring. Introduced in April 2011. Review: turboBB

V Series with variable output

V10A - 1xAA forward clicky with Cree XP-G R5 and a variable selector ring for 1 to 210 lumens output (looks like the M10A, but does not have preset brightness levels). Introduced in December 2010. Review: Selfbuilt

V10R - 1xCR123A forward clicky with Cree XP-G R5 and a variable selector ring for 1 to 210 lumens output. Also available in a titanium version that looks very similar to JETBeam's TCR2. The aluminum and titanium version were introduced in December 2010.

V20A - 2xAA forward clicky with Cree XP-G R5 and a variable selector ring for 1 to 210 lumens output. Introduced in December 2010.

V20C - 2xCR123A/1x18650 forward clicky with Cree XM-L T6 and a variable selector ring for 0.5 to 438 lumens output. Introduced in June 2011. Review: Light Reviews

Popular Dealers

Battery Junction has all the Sunwayman lights in addition to many other brands of flashlights. Discount available in the CPF Good Deals thread (requires registration).