Philips Lumileds
Philips Lumileds Lighting Company is based in San Jose, California. It was started in 1999 as a joint venture between Philips and Agilent (spun off of HP), but in 2005 Philips bought Agilent's share, so now it is part of Philips. They developed some of the first power LED's to be used in flashlights, like the Luxeon I, III, and V, and continue to produce the Luxeon Rebel.
Luxeon Rebel
Used in Maglites through 2010. Also used in early versions of Fenix LxD/PxD series.
| Bin | 350mA |
|---|---|
| H | 50-60 |
| J | 60-70 |
| K | 70-80 |
| L | 80-90 |
| M | 90-100 |
| P | 100-130 |
| Q | 120-140 |
| R | 160-180 |
| S | 180-200 |
Luxeon Rebel ES
Same size package as the regular Rebel but with a larger die under the dome, the Rebel ES is capable of output of 200 lumens at 700mA and 320 lumens at 1000mA. The brightness bins below are not directly comparable to the ones above since the ES series are rated at a higher current.
| Bin | 700mA |
|---|---|
| T | 200-220 |
| U | 220-240 |
| V | 240-260 |
| W | 260-280 |
| X | 280-300 |
Past Products
Luxeon I a 1-watt LED capable of producing 30-60 lumens at 350mA, this LED was used in the Fenix L1S
Luxeon III a 3-watt LED LED capable of producing 60-90 lumens at currents up to 1400mA. Used in the Fenix L1T
Luxeon V a 5-watt LED
Luxeon K2 smaller than the earlier Luxeons, but with greater output of up to 140 lumens at 1500mA.
Luxeon K2 TFFC for "thin film flip chip"