Cree: Difference between revisions
add XT-E
(→XB-D) |
(add XT-E) |
||
| Line 36: | Line 36: | ||
==XB-D== | ==XB-D== | ||
Very compact LED (the die is mounted on a chip 2.45 mm square opposed to 3.45 mm square for XP series) introduced in February 2012, promising lower cost. Should provide similar brightness to XP-E LED's. First available units were warm white with Q2 brightness bin (at 350mA). [http://www.cree.com/products/pdf/XLampXB-D.pdf Datasheet] | Very compact LED (the die is mounted on a chip 2.45 mm square opposed to 3.45 mm square for XP series) introduced in February 2012, promising lower cost. Should provide similar brightness to XP-E LED's. First available units were warm white with Q2 brightness bin (at 350mA). Can be driven up to 1000mA. [http://www.cree.com/products/pdf/XLampXB-D.pdf Datasheet] | ||
==XM-L== | ==XM-L== | ||
| Line 145: | Line 145: | ||
This LED was very widely used, featured in flashlights by [[Fenix]], [[JETBeam]], [[NiteCore]] D10, and [[EagleTac]] P20 and T20 series, and is still available in some [[budget lights]]. The neutral white version is used in Nitecore EZ series. It is easily recognized by the metal ring around the die with 3 yellow strips and 2 bonding wires. | This LED was very widely used, featured in flashlights by [[Fenix]], [[JETBeam]], [[NiteCore]] D10, and [[EagleTac]] P20 and T20 series, and is still available in some [[budget lights]]. The neutral white version is used in Nitecore EZ series. It is easily recognized by the metal ring around the die with 3 yellow strips and 2 bonding wires. | ||
==XT-E== | |||
Introduced in February 2012, the XT-E has the same size chip as the XP series but seems to have a wider viewing angle for more flood and less throw. Can be driven up to 1.5A and available in bins up to R5 (at 350mA). [http://www.cree.com/products/pdf/XLampXT-E.pdf Datasheet] | |||