Luminus: Difference between revisions
replace LED's with LEDs
(→SST-50) |
(replace LED's with LEDs) |
||
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
[[File:Luminus_SST-90.jpg|thumb|Luminus SST-90 LED]]Luminus is a LED manufacturer based in Billerica, Massachusetts. They produce the SST-50 and SST-90 | [[File:Luminus_SST-90.jpg|thumb|Luminus SST-90 LED]]Luminus is a LED manufacturer based in Billerica, Massachusetts. They produce the SST-50 and SST-90 LEDs (SSR-50 and SSR-90 are just the LED mounted to a star). These LEDs compete with the [[Seoul Semiconductor|SSC]] P7 and [[Cree]] MC-E, but the LED is a single emitter instead of 4 separate ones working together. The size of the emitter is similar so there is a large hotspot, but because the entire emitter lights up, SST-50 lights are less prone to a donut hole of darkness at the center of the beam. | ||
==SBT-90== | |||
The SBT-90 uses the same die as the SST-90, but it is behind a flat window instead of a dome. While the SBT-90 has less output, flashlights that use the SBT-90 will have greater throw than an equivalent with an SST-90. This LED was first used the [[Olight]] SR95 and [[EagleTac]] MX25L2. [http://www.luminus.com/products/SBT-90.html Web page], [http://www.luminus.com/products/Luminus_SBT90_Datasheet.pdf datasheet], [http://www.luminus.com/products/Luminus_SBT90_BinningLabeling.pdf binning]. | |||
{|class="wikitable" style="text-align: center; width: 400px;" | |||
|+ Luminus SBT-90 (maximum bin is NA) | |||
|- | |||
!Bin !! 3150mA<BR>(350mA/mm²)<BR>44% !! 5000mA<BR>(555mA/mm²)<BR>64% !! 9000mA<BR>(1000mA/mm²)<BR>100% | |||
|- | |||
|MB || 653-700 || 950-1018 || 1485-1590 | |||
|- | |||
|'''NA*''' || 700-752 || 1018-1094 || 1590-1710 | |||
|} | |||
==SST-50== | ==SST-50== | ||
The SST-50 is 2.2mm x 2.2mm (5 mm²) drawing up to 5 amps while outputting up to 1250 emitter lumens. This is a big current draw for a flashlight and batteries and produces a large amount of heat, therefore the | The SST-50 is 2.2mm x 2.2mm (5 mm²) drawing up to 5 amps while outputting up to 1250 emitter lumens. This is a big current draw for a flashlight and batteries and produces a large amount of heat, therefore the LEDs are driven lower than maximum. Flashlights using this LED are capable of 500 lumens of output on one 18650 li-ion cell and up to 900 lumens using 2 18650's. [http://www.luminus.com/products/SST-50.html web page], [http://www.luminus.com/products/Luminus_SST50_Datasheet.pdf datasheet], [http://www.luminus.com/products/Luminus_SST50_BinningLabeling.pdf binning]. | ||
The SST-50 is used in the ThruNite Catapult, LumaPower D-Mini VX Ultra, Olight M21 Warrior Luminus, and the Tiablo AS50. | The SST-50 is used in the ThruNite Catapult, LumaPower D-Mini VX Ultra, Olight M21 Warrior Luminus, and the Tiablo AS50. | ||
Line 27: | Line 42: | ||
==SST-90== | ==SST-90== | ||
The SST-90 is 3mm x 3mm (9mm²) drawing up to 9 amps while outputting up to 2250 emitter lumens. Bins K, L, M, N, and P are subdivided into 50-lumen increments (e.g. M1, M2, and M3, where M1 would 700-750, M2 would 750-800, etc.) [http://www.luminus.com/products/SST-90.html web page] [http://www.luminus.com/products/ | The SST-90 is 3mm x 3mm (9mm²) drawing up to 9 amps while outputting up to 2250 emitter lumens. Bins K, L, M, N, and P are subdivided into 50-lumen increments (e.g. M1, M2, and M3, where M1 would 700-750, M2 would 750-800, etc.).[http://www.luminus.com/products/SST-90.html web page] [http://www.luminus.com/products/Luminus_SST90_Datasheet.pdf datasheet], [http://www.luminus.com/products/Luminus_SST90_BinningLabeling.pdf binning]. | ||
Line 39: | Line 54: | ||
|M || 700-850 || 1085-1318 || 1890-2295 | |M || 700-850 || 1085-1318 || 1890-2295 | ||
|- | |- | ||
| | |N || 850-1000 || 1318-1550 || 2295-2700 | ||
|- | |- | ||
|P || 1000-1200 || 1550-1860 || 2700-3240 | |'''P*''' || 1000-1200 || 1550-1860 || 2700-3240 | ||
|- | |- | ||
|Q || 1200-1450 || 1860-2248 || 3240-3915 | |Q || 1200-1450 || 1860-2248 || 3240-3915 |