Foursevens: Difference between revisions

Foursevens (view source)

Revision as of 13:10, 20 May 2012

494 bytes removed , 20 May 2012

no edit summary

Brted

confirmed, developer

1,668

edits

@@ Line 9: / Line 9: @@
 === Maelstrom ===
-Tactical series of higher output lights. G series lights use a Cree XP-G LED; S series lights use a Luminus SST; and X series use a Cree XM-L.
+Tactical series of higher output lights.
-'''MMS''' - 2xCR123A or 1x18650 4-mode thrower with Cree XP-G and output levels of 0.2, 28, 200, and 350 lumens introduced in May 2012. Two different mode groups available: H-M-L-Moonlight or Turbo-Strobe-SOS-Beacon. Modes are selected by turning the head to 4 different positions.
+'''MMS''' - 2xCR123A or 1x18650 4-mode thrower with Cree XP-G and output levels of 0.2, 28, 200, and 350 lumens introduced in May 2012. Two different mode groups available: H-M-L-Moonlight or Turbo-Strobe-SOS-Beacon. Modes are selected by turning the head to 4 different positions. This light was formerly the 4Sevens G5.
-'''MM-X''' - 2xCR123A or 1x18650 4-mode thrower with Cree XM-L and a maximum output of 480 lumens introduced in May 2012. Two different mode groups available: H-M-L-Moonlight or Turbo-Strobe-SOS-Beacon. Output levels are 0.3, 30, 270, and 480 lumens. Modes are selected by turning to 4 different positions. This light is available cool white or neutral LED tints. The neutral has slightly less output. This light was formerly the 4Sevens X7
+'''MMU''' - 1x26650 2-mode light with [[Luminus]] SST-90 LED and maximum output of 800 (Low is 120 lumens). The light memorizes the last mode used. Similar to [[SureFire]] lights, the tail clicky is for momentary On only when the tailcap is loosened a half turn. To keep the light on, the tailcap must be fully tightened. Foursevens sells a special 26650 battery for this light that has higher current capacity. Introduced in May 2012. This light was formerly the 4Sevens S12.
+'''MMU-HD''' - 6xCR123A 5-mode light with a Luminus SST-90 LED and maximum output of 1200 lumens (Low is 80 lumens). Modes are selected by rotating the tail of the light. This light does not accept 17670 or 18650 batteries but can handle 16340's. Each set of 2 batteries in the holder is in parallel, so the operating voltage is 4.5-8.4V. Introduced in May 2012. This light was formerly the 4Sevens S18.
 '''MMU-X''' - 1x26650 2-mode light with Cree XM-L and output levels of 100 and 640 lumens. This light features a lock-out tailcap, mode memory, and thermal regulation. The MMU-X uses a lower current type of 26650 battery than the one for the MMU. So you can use the MMU's battery in the MMU-X, but shouldn't use the MMU-X's battery in the MMU. Introduced in May 2012. This light was formerly the 4Sevens X12.
-'''S12''' - 1x26650 2-mode light with [[Luminus]] SST-90 LED and maximum output of 800 (Low is 120 lumens). The light memorizes the last mode used. Similar to [[SureFire]] lights, the tail clicky is for momentary On only when the tailcap is loosened a half turn. To keep the light on, the tailcap must be fully tightened. The 26650 is a special size lithium-ion battery. 4Sevens sells the battery and charger separately. At 3900mAh capacity, it has more capacity than a typical 2400mAh 18650 and is driven at up to 5 amps. First available in February 2011. There was also a limited edition copper version with a copper head for better heat sinking and gold plating to prevent tarnishing. Review: [http://www.candlepowerforums.com/vb/showthread.php?311842 HKJ]
+'''MM-X''' - 2xCR123A or 1x18650 4-mode thrower with Cree XM-L and a maximum output of 480 lumens introduced in May 2012. Two different mode groups available: H-M-L-Moonlight or Turbo-Strobe-SOS-Beacon. Output levels are 0.3, 30, 270, and 480 lumens. Modes are selected by turning to 4 different positions. This light is available cool white or neutral LED tints. The neutral has slightly less output. This light was formerly the 4Sevens X7.
-'''S18''' - 6xCR123A 5-mode light with a Luminus SST-90 LED and maximum output of 1200 lumens (Low is 80 lumens). Has the same switch as other Maelstroms and modes are selected by rotating the tail of the light. This light does not accept 17670 or 18650 batteries but can handle 16340's. Each set of 2 batteries in the holder is in parallel, so the operating voltage is 4.5-8.4V. Introduced in August 2011. Review: [http://www.candlepowerforums.com/vb/showthread.php?319505 Selfbuilt]
+=== Preon ===
+'''Preon P0''' - 1xAAA 2-mode stainless steel twisty with a Cree XP-E LED. Output is 0.24 or 25 lumens. Modes are selected by turning the light off and back on again quickly. The light comes on in Low. Introduced in May 2012.
+'''Preon P1''' - 1xAAA 7-mode twisty with Cree XP-G LED. Has a pocket clip and matte finish (no knurling) and is available in black, blue, red, yellow, and satin titanium. Regular operation cycles through 2, 13, and 70 [[ANSI-NEMA FL-1|ANSI]] lumens (40m throw), but if you cycle quickly through all the modes twice, you also get strobe, SOS, and high and low beacon modes. Parts are interchangeable with Preon 2, which allows use of a clicky tail. Introduced in May 2012. This light was formerly the 4Sevens Preon 1.
+'''Preon P2''' - 2xAAA 7-mode clicky with XP-G LED. Has a pocket clip and matte finish (no knurling) and is available in black, blue, red, yellow, satin titanium, and titanium black (with titanium head and tail but black body). Regular operation cycles through 3, 26, and 120 ANSI lumens (59m throw), but if you cycle quickly through all the modes twice, you also get strobe, SOS, and high and low beacon modes. Parts are interchangeable with Preon 1, which allows use of a flat tail and using the light as a twisty. A warm white high CRI version is available in black or titanium black which has less output. Introduced in May 2012.
-=== Preon ===
+'''The rest of this page is old 4Sevens stuff that has been updated to Foursevens yet'''
-'''Preon 1''' - 1xAAA 7-mode twisty with Cree XP-G S2 LED introduced in November 2010. Has a pocket clip and matte finish (no knurling) and is available in black, blue, red, yellow, and titanium. Regular operation cycles through 2, 13, and 70 [[ANSI-NEMA FL-1|ANSI]] lumens (40m throw), but if you cycle quickly through all the modes twice, you also get strobe, SOS, and high and low beacon modes. Parts are interchangeable with Preon 2, which allows use of a clicky tail. Original version introduced in November 2009 with 1.8, 8.5, and 70 OTF lumens. A high CRI version in black was released in November 2011.
-'''Preon 2''' - 2xAAA 7-mode clicky with XP-G S2 LED introduced in November 2010. Has a pocket clip and matte finish (no knurling) and is available in black, blue, red, yellow, titanium and titanium black (with titanium head and tail but black body). Regular operation cycles through 3, 26, and 120 ANSI lumens (59m throw), but if you cycle quickly through all the modes twice, you also get strobe, SOS, and high and low beacon modes. Parts are interchangeable with Preon 1, which allows use of a flat tail and using the light as a twisty. Original version, introduced in November 2009, used a XP-G R5 and had modes of 2.2, 22, and 160 OTF lumens. In May 2010, a limited edition with warm white XP-G Q5 LED was introduced. In June 2010, a limited edition with neutral white XP-G R4 was introduced. In October 2011, there was another run of neutral XP-G Preon 2's. A high CRI version in black was released in November 2011.
 === Quark ===