EagleTac: Difference between revisions
→Current Lights: add XP-G2 to Mini line, remove output for XT-E versions
(→Current Lights: add titanium versions of D25A and D25C clicky) |
(→Current Lights: add XP-G2 to Mini line, remove output for XT-E versions) |
||
| Line 7: | Line 7: | ||
EagleTac has three different ways of quoting lumen output for its lights: emitter lumens, out-the-front (OTF), or [[ANSI-NEMA FL-1|ANSI]] FL-1, so be careful when comparing light outputs of different versions. If the output type isn't listed, it is probably emitter lumens which they used up until late 2010. | EagleTac has three different ways of quoting lumen output for its lights: emitter lumens, out-the-front (OTF), or [[ANSI-NEMA FL-1|ANSI]] FL-1, so be careful when comparing light outputs of different versions. If the output type isn't listed, it is probably emitter lumens which they used up until late 2010. | ||
'''D25 Clicky Series''' This is a series of lights with the same user interface. All are 10-mode reverse clicky flashlights with 3 constant modes in addition to 7 flashy modes available by cycling through the constant modes twice. When switched to High, the light will be in Turbo mode for 90 seconds before backing down to High. With the head loosened, all 10 modes are available. With the head tightened, the modes alternate between Turbo and Strobe. A group of lower modes (Moonlight, Low, Med instead of Low, Medium, High) is available by twisting the head back and forth three times from the loosened position. Mode memory is optional via three twists from the tightened position. Originally this light was introduced with five different LED's available: Cree XM-L U2, Cree XP-G S2, or the new Cree XT-E R5 in addition to neutral Cree XM-L T6 and Cree XP-G R4. However the initial batch of XT-E lights were recalled due to problems with beam quality. A clicky body was also made available to allow people who had twisty D25 mini's to convert their light to a clicky. The clicky series was introduced in May 2012. | '''D25 Clicky Series''' This is a series of lights with the same user interface. All are 10-mode reverse clicky flashlights with 3 constant modes in addition to 7 flashy modes available by cycling through the constant modes twice. When switched to High, the light will be in Turbo mode for 90 seconds before backing down to High. With the head loosened, all 10 modes are available. With the head tightened, the modes alternate between Turbo and Strobe. A group of lower modes (Moonlight, Low, Med instead of Low, Medium, High) is available by twisting the head back and forth three times from the loosened position. Mode memory is optional via three twists from the tightened position. Originally this light was introduced with five different LED's available: Cree XM-L U2, Cree XP-G S2, or the new Cree XT-E R5 in addition to neutral Cree XM-L T6 and Cree XP-G R4. However the initial batch of XT-E lights were recalled due to problems with beam quality. In September 2012 EagleTac announced that Cree XP-G2 LED's would be available. A clicky body was also made available to allow people who had twisty D25 mini's to convert their light to a clicky. The clicky series was introduced in May 2012. | ||
:'''D25A Clicky''' 1xAA with a Cree XM-L U2 LED, output is 0.5, 8, 75, and 122 ANSI lumens on Turbo | :'''D25A Clicky''' 1xAA with a Cree XM-L U2 LED, output is 0.5, 8, 75, and 122 ANSI lumens on Turbo. With a Cree XP-G S2, output is 0.5, 9, 71, or 110 lumens. On a lithium-ion 14500 battery the light loses the lower modes. Also available in a titanium version. Introduced in May 2012. | ||
:'''D25A2 Clicky''' 2xAA with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI lumens on Turbo | :'''D25A2 Clicky''' 2xAA with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI lumens on Turbo. With a Cree XP-G S2, output is 0.5, 22, 149, or 219 lumens. Review: [http://light-reviews.com/Flashlight-detail/eagletac-d25a2-clicky-cree-xp-g-s2-review/ Light Reviews]. | ||
:'''D25C Clicky''' 1xCR123A with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI | :'''D25C Clicky''' 1xCR123A with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI lumens. With the XP-G S2 LED output is 0.5, 22, 149, or 219 lumens. Neutral LED's will have 7-10% lower output. Reviews: Light Reviews ([http://light-reviews.com/Flashlight-detail/eagletac-d25c-clicky-cree-xp-g-s2-review/ XP-G], [http://light-reviews.com/Flashlight-detail/eagletac-d25c-clicky-cree-xm-l-u2/ XM-L]). | ||
:'''D25C2 Clicky''' 2xCR123A or 1x17670 with a Cree XM-L U2 LED, output is 5, 50, 370, or 548 ANSI lumens on Turbo | :'''D25C2 Clicky''' 2xCR123A or 1x17670 with a Cree XM-L U2 LED, output is 5, 50, 370, or 548 ANSI lumens on Turbo. The XP-G S2 output is 5, 32, 238, or 344 lumens. Also available in titanium. | ||
:'''D25LC2 Clicky''' 2xCR123A or 1x18650 with a Cree XM-L U2 LED, output is 5, 50, 370, or 548 ANSI lumens on Turbo | :'''D25LC2 Clicky''' 2xCR123A or 1x18650 with a Cree XM-L U2 LED, output is 5, 50, 370, or 548 ANSI lumens on Turbo. The XP-G S2 output is 5, 32, 238, or 344 lumens. This light is slightly wider and comes with a sleeve for 2xCR123A use to avoid battery rattle. Review: [http://light-reviews.com/Flashlight-detail/eagletac-d25lc2-clicky-cree-xm-l-u2-review/ Light Reviews]. | ||
'''D25A Mini 1''' 8-mode 1xAA twisty with a Cree XP-G S2 LED and output of 3, 19, or 86 ANSI lumens. Turbo mode for the first 90 seconds on High gives 110 lumens. Additional flashing modes are hidden by cycling through the 3 modes quickly two times in a row. Introduced in August 2011. A titanium version with a Cree XM-L U2 (125 OTF lumens max) or XP-G S2 LED was announced in December 2011. | '''D25A Mini 1''' 8-mode 1xAA twisty with a Cree XP-G S2 LED and output of 3, 19, or 86 ANSI lumens. Turbo mode for the first 90 seconds on High gives 110 lumens. Additional flashing modes are hidden by cycling through the 3 modes quickly two times in a row. Introduced in August 2011. A titanium version with a Cree XM-L U2 (125 OTF lumens max) or XP-G S2 LED was announced in December 2011. | ||