Olight: Difference between revisions
add M3X XM-L2
(add website) |
(add M3X XM-L2) |
||
| Line 23: | Line 23: | ||
'''M31 Triton''' 1-mode 3xCR123A forward clicky with Luminus SST-50 LED. Output level or strobe can be set by loosening and tightening bezel. The M31 has a larger head (68mm) than the M30 (44mm). Body tube extension can be added for 4xCR123A or 2x18650 operation. Brightness levels are 60, 320, and 800 lumens plus strobe. [http://www.olightworld.com/product_show.asp?id=177 Web page] Review: [http://www.candlepowerforums.com/vb/showthread.php?292989 HKJ] | '''M31 Triton''' 1-mode 3xCR123A forward clicky with Luminus SST-50 LED. Output level or strobe can be set by loosening and tightening bezel. The M31 has a larger head (68mm) than the M30 (44mm). Body tube extension can be added for 4xCR123A or 2x18650 operation. Brightness levels are 60, 320, and 800 lumens plus strobe. [http://www.olightworld.com/product_show.asp?id=177 Web page] Review: [http://www.candlepowerforums.com/vb/showthread.php?292989 HKJ] | ||
'''M3X Triton''' 2-mode 3xCR123A (4xCR123A/2x18650 with extension) forward clicky with Cree XM-L LED. Maximum output is 700 lumens. With head loosened, output is 60 lumens. Loosen-tighten-loosen to get strobe. Has the larger head of the M31. | '''M3X Triton''' 2-mode 3xCR123A (4xCR123A/2x18650 with extension) forward clicky with Cree XM-L LED. Maximum output is 700 lumens (475m throw). With head loosened, output is 60 lumens. Loosen-tighten-loosen to get strobe. Has the larger head of the M31. | ||
'''S10 Baton''' 5-mode 2xCR123A or 1x18650 forward clicky with Cree XM-L. Normal output levels are 5, 70, and 320 lumens. With an electronic switch, holding the power switch goes to a 0.5 lumen Moonlight mode while a double-click gives strobe. A red LED under the power switch indicates a low battery. The interface and look are a little different from earlier Baton models. Introduced in August 2012. Review: [http://www.candlepowerforums.com/vb/showthread.php?344172 Selfbuilt] | '''M3X XM-L2''' 2-mode 3xCR123A (4xCR123A/2x18650 with extension) forward clicky with Cree XM-L2 LED. Maximum output is 1000 lumens (580m throw). With head loosened, output is 300 lumens. Loosen-tighten-loosen to get strobe. Has the larger head of the M31. | ||
'''S10 Baton''' 5-mode 2xCR123A or 1x18650 forward clicky with Cree XM-L. Normal output levels are 5, 70, and 320 lumens. With an electronic switch, holding the power switch goes to a 0.5 lumen Moonlight mode while a double-click gives strobe. A red LED under the power switch indicates a low battery. The interface and look are a little different from earlier Baton models. Introduced in August 2012. There were two limited edition titanium versions released with either polished or bead blasted finish featuring a neutral tint XM-L with maximum output of 300 lumens. Review: [http://www.candlepowerforums.com/vb/showthread.php?344172 Selfbuilt] | |||
'''S20 Baton''' 5-mode 1xCR123A forward clicky with Cree XM-L. Normal output levels are 5, 100, and 470 lumens (100m throw). With an electronic switch, holding the power switch goes to a 0.5 lumen Moonlight mode while a double-click gives strobe. A red LED under the power switch indicates a low battery. Introduced in December 2012. Review: [http://www.candlepowerforums.com/vb/showthread.php?350715 Selfbuilt] | '''S20 Baton''' 5-mode 1xCR123A forward clicky with Cree XM-L. Normal output levels are 5, 100, and 470 lumens (100m throw). With an electronic switch, holding the power switch goes to a 0.5 lumen Moonlight mode while a double-click gives strobe. A red LED under the power switch indicates a low battery. Introduced in December 2012. Review: [http://www.candlepowerforums.com/vb/showthread.php?350715 Selfbuilt] | ||
| Line 43: | Line 45: | ||
'''SR92 Intimidator''' Triple Cree XM-L T6 LED's with maximum output of 1500 lumens. This light is more compact than the SR90. Low is 450 lumens plus strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. The body is a 6-cell battery pack (6x18650) with charging socket and charge indicator on the tail. Introduced in June 2011. Review: [http://www.candlepowerforums.com/vb/showthread.php?322320 selfbuilt]. | '''SR92 Intimidator''' Triple Cree XM-L T6 LED's with maximum output of 1500 lumens. This light is more compact than the SR90. Low is 450 lumens plus strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. The body is a 6-cell battery pack (6x18650) with charging socket and charge indicator on the tail. Introduced in June 2011. Review: [http://www.candlepowerforums.com/vb/showthread.php?322320 selfbuilt]. | ||
'''SR95 Intimidator''' Similar to the SR90 and available with a Luminus SST-90 P with output levels of 120, 600, or 2000 lumens or SBT-90 LED with output levels of 60, 300, or 1050 lumens (the SBT version is called the SR95UT). Introduced in May 2012. Review: [http://www.candlepowerforums.com/vb/showthread.php?338717 Selfbuilt] | '''SR95 Intimidator''' Similar to the SR90 and available with a Luminus SST-90 P with output levels of 120, 600, or 2000 lumens (720m throw) or SBT-90 LED with output levels of 60, 300, or 1050 lumens (820m throw) (the SBT version is called the SR95UT). Introduced in May 2012. The SR95S UT has the round die SBT-70 LED with maximum output of 1250 lumens (1000m throw). Review: [http://www.candlepowerforums.com/vb/showthread.php?338717 Selfbuilt] | ||
'''T10''' 1xCR123A 3-mode forward clicky light Cree XP-G R5 LED. Modes are selected by loosening and tightening the head. Output levels are 5, 100, or 190 lumens. Older version with Cree XR-E Q5 had 8 modes with output levels of 6, 15, 38, 85, and 190 lumens plus SOS (High and Low) and Strobe. | '''T10''' 1xCR123A 3-mode forward clicky light Cree XP-G R5 LED. Modes are selected by loosening and tightening the head. Output levels are 5, 100, or 190 lumens. Older version with Cree XR-E Q5 had 8 modes with output levels of 6, 15, 38, 85, and 190 lumens plus SOS (High and Low) and Strobe. | ||