ThruNite: Difference between revisions

ThruNite (view source)

Revision as of 10:31, 10 April 2013

88 bytes added , 10 April 2013

→‎Lights: some details on the Saber 1A

Brted

confirmed, developer

1,668

edits

@@ Line 9: / Line 9: @@
 '''Catapult V3''' - 2x18650 or 1x18650/2xCR123A 2-mode Cree XM-L T6 forward clicky light with a large reflector and 900 lumens maximum output. Modes are selected by tightening or loosening the head. With the head loosened, the user can half-press the clicky to rotate between Low, Medium, High, and Strobe. Except for Strobe, the loosened mode will be remembered. Tightened is always at Maximum. Introduced in February 2011. A version with a neutral-tinted XM-L was introduced in April 2011. Review: [http://www.candlepowerforums.com/vb/showthread.php?311102 Selfbuilt]
-'''Saber 1A''' - 1xAA 3-mode Cree XP-G2 R5 twisty with modes of 169, 9, and 0.09 lumens. Not recommended with 14500 due to overheating. Last mode is memorized after light is on for 3 seconds or longer. Introduced in January 2013 as a successor to the T10. This light was available in March 2013 as a [[Terminology#BLF|BLF]] special edition, but the only difference is "BLF" is printed on the side.
+'''Saber 1A''' - 1xAA 3-mode Cree XP-G2 R5 twisty with modes of 0.09, 9, and 169 lumens. Not recommended with 14500 due to overheating. Last mode is memorized after light is off for 2 seconds or longer. Introduced in January 2013 as a successor to the T10 (in fact at least some lights says ThruNite T10 on one side and Saber 1A on the other). This light was available in March 2013 as a [[Terminology#BLF|BLF]] special edition, but the only difference is "BLF" is printed on the side.
 '''Saber 1C''' - 1xCR123A 3-mode Cree XP-G2 R5 twisty with modes of 251, 22, and 0.09 lumens. Not recommended with 14500 due to overheating. Last mode is memorized after light is on for 3 seconds or longer. Introduced in January 2013 as a successor to the T20.