Flashlight Wiki

Fenix: Difference between revisions

Page Discussion

Fenix (view source)

Revision as of 20:15, 22 April 2013

No change in size ,  22 April 2013
Move PD10, PD20, and PD30 to Past Lights
(Move PD10, PD20, and PD30 to Past Lights)
Line 45: Line 45:


==== PD Series ====
==== PD Series ====
'''PD10''' - 1xCR123A 3-mode twisty. Cree XP-E R2 LED with 3 brightness levels: 6, 95, and 190 lumens. Successor to P1D, but with more knurling, more cylindrical shape, and a pocket clip. [http://www.fenixlight.com/viewproduct.asp?id=110 web page] PD10 Titan: Titanium version with Cree XP-G R5 (7, 110, and 216 lumens), a limited edition made in December 2009. The PD10 was discontinued in 2012.
'''PD20''' - 1xCR123A 6-mode reverse clicky. Part of the LDxx family. Output is similar to LD20. Cree XR-E Q5 output is 9, 47, 94, or 180 lumens. Later upgraded to XP-E R2 LED with a more cylindrical shape with body knurling, trapezoidal threads (not compatible with earlier versions), a pocket clip, and now the body and tail cap are one piece. R2 output is 9, 48, 96, or 190 lumens with a larger hotspot. [http://www.fenixlight.com/viewnproduct.asp?id=31 Q5 web page] [http://www.fenixlight.com/viewnproduct.asp?id=59 R2 web page] Review: [http://www.flashlightreviews.com/reviews/fenix_pd20.htm Flashlight Reviews] The PD20 was discontinued in 2013.


'''PD22''' - 1xCR123A 6-mode forward clicky with side switch for mode selection. Has a Cree XP-G R5 for modes of 8, 46, 95, and 190 lumens (101m throw) as well as Strobe (hold for 1 second) and SOS (hold for 3 seconds). Introduced in March 2012. A special editions with a Cree XP-G S2 bin has maximum output of 200 lumens.
'''PD22''' - 1xCR123A 6-mode forward clicky with side switch for mode selection. Has a Cree XP-G R5 for modes of 8, 46, 95, and 190 lumens (101m throw) as well as Strobe (hold for 1 second) and SOS (hold for 3 seconds). Introduced in March 2012. A special editions with a Cree XP-G S2 bin has maximum output of 200 lumens.
'''PD30''' - 2xCR123A 6-mode light with Cree XP-G R5 LED. Successor to P3D. Better tailcap knurling, improved tailcap design with better lanyard ring, easier to turn head which is also an anti-roll hexagon shape, lower low, medium, and high, smoother tailcap switch. Longer runtime on low, medium, and high.  The latest update with an XP-G R5 has an ouput of 10, 67, 124, and 257 [[ANSI-NEMA FL-1|ANSI]] lumens and was introduced in November 2010. The previous version with an XP-G R4 LED was introduced in December 2009 and has an output of 11, 75, 140, and 265 lumens. The XR-E R2 LED version has an output of 10, 70, 125, and 235 lumens (sometimes called a PD30+) and was introduced in September 2009. Output of the original XR-E Q5 is 9, 70, 117 or 220 lumens. The Q5 edition has triangular knurling (not compatible with R2, R4 or R5 versions), less knurling on the body, and lacks a pocket clip. [http://www.fenixlight.com/viewnproduct.asp?id=31 Q5 web page] [http://www.fenixlight.com/viewnproduct.asp?id=55 R2 web page] Reviews: [http://www.flashlightreviews.com/reviews/fenix_pd30.htm Flashlight Reviews] [http://www.light-reviews.com/fenix_pd30_r4/ Light Reviews (R4)]. The PD30 was discontinued in 2013.


'''PD32''' - 2xCR123A/18650 6-mode forward clicky with side switch for mode selection. Has a Cree XP-G R5 for modes of 9, 70, 130, and 315 lumens as well as Strobe (hold for 1 second) and SOS (hold for 3 seconds). Introduced in December 2011. A special editions with a Cree XP-G S2 bin has maximum output of 330 lumens. Introduced in December 2012, the "ultimate edition" PD32UE has a neutral Cree XM-L T6 LED for 480 lumens (and up to 3 minutes of burst output at 740 lumens) and a Low of 9 lumens. In March, 2013, the LED was upgraded to the XP-G2 R5 with output levels of 5, 70, 135, and 340 lumens.
'''PD32''' - 2xCR123A/18650 6-mode forward clicky with side switch for mode selection. Has a Cree XP-G R5 for modes of 9, 70, 130, and 315 lumens as well as Strobe (hold for 1 second) and SOS (hold for 3 seconds). Introduced in December 2011. A special editions with a Cree XP-G S2 bin has maximum output of 330 lumens. Introduced in December 2012, the "ultimate edition" PD32UE has a neutral Cree XM-L T6 LED for 480 lumens (and up to 3 minutes of burst output at 740 lumens) and a Low of 9 lumens. In March, 2013, the LED was upgraded to the XP-G2 R5 with output levels of 5, 70, 135, and 340 lumens.
Line 133: Line 127:


'''P3D''' - 2xCR123A 6-mode light in the LxD family, but with a different head due to the higher voltage of 2 CR123 batteries. A single li-ion cell will not work due to the lower voltage and lack of a boost circuit in the flashlight. Also the tube 16.8 mm, so 17 and 18 mm li-ions would not fit. Two li-ion 16340's willl work despite the higher voltage. Output varies depending on version with the original P3D with a Luxeon Rebel 80 LED yielding 9, 40, 90, and 160 lumens. The P3D Premium 100 with a Rebel 100 yields 11, 50, 112, and 200 lumens. The P3D CE with a Cree 7090 XR-E P4 LED yields 9, 40, 90, and 160 lumens. The P3D Premium Q5 yields 12, 53, 120, and 215 lumens. Replaced by PD30. [http://www.fenixlight.com/flashlight/fenixp3d.htm web page]
'''P3D''' - 2xCR123A 6-mode light in the LxD family, but with a different head due to the higher voltage of 2 CR123 batteries. A single li-ion cell will not work due to the lower voltage and lack of a boost circuit in the flashlight. Also the tube 16.8 mm, so 17 and 18 mm li-ions would not fit. Two li-ion 16340's willl work despite the higher voltage. Output varies depending on version with the original P3D with a Luxeon Rebel 80 LED yielding 9, 40, 90, and 160 lumens. The P3D Premium 100 with a Rebel 100 yields 11, 50, 112, and 200 lumens. The P3D CE with a Cree 7090 XR-E P4 LED yields 9, 40, 90, and 160 lumens. The P3D Premium Q5 yields 12, 53, 120, and 215 lumens. Replaced by PD30. [http://www.fenixlight.com/flashlight/fenixp3d.htm web page]
'''PD10''' - 1xCR123A 3-mode twisty. Cree XP-E R2 LED with 3 brightness levels: 6, 95, and 190 lumens. Successor to P1D, but with more knurling, more cylindrical shape, and a pocket clip. [http://www.fenixlight.com/viewproduct.asp?id=110 web page] PD10 Titan: Titanium version with Cree XP-G R5 (7, 110, and 216 lumens), a limited edition made in December 2009. The PD10 was discontinued in 2012.
'''PD20''' - 1xCR123A 6-mode reverse clicky. Part of the LDxx family. Output is similar to LD20. Cree XR-E Q5 output is 9, 47, 94, or 180 lumens. Later upgraded to XP-E R2 LED with a more cylindrical shape with body knurling, trapezoidal threads (not compatible with earlier versions), a pocket clip, and now the body and tail cap are one piece. R2 output is 9, 48, 96, or 190 lumens with a larger hotspot. [http://www.fenixlight.com/viewnproduct.asp?id=31 Q5 web page] [http://www.fenixlight.com/viewnproduct.asp?id=59 R2 web page] Review: [http://www.flashlightreviews.com/reviews/fenix_pd20.htm Flashlight Reviews] The PD20 was discontinued in 2013.
'''PD30''' - 2xCR123A 6-mode light with Cree XP-G R5 LED. Successor to P3D. Better tailcap knurling, improved tailcap design with better lanyard ring, easier to turn head which is also an anti-roll hexagon shape, lower low, medium, and high, smoother tailcap switch. Longer runtime on low, medium, and high.  The latest update with an XP-G R5 has an ouput of 10, 67, 124, and 257 [[ANSI-NEMA FL-1|ANSI]] lumens and was introduced in November 2010. The previous version with an XP-G R4 LED was introduced in December 2009 and has an output of 11, 75, 140, and 265 lumens. The XR-E R2 LED version has an output of 10, 70, 125, and 235 lumens (sometimes called a PD30+) and was introduced in September 2009. Output of the original XR-E Q5 is 9, 70, 117 or 220 lumens. The Q5 edition has triangular knurling (not compatible with R2, R4 or R5 versions), less knurling on the body, and lacks a pocket clip. [http://www.fenixlight.com/viewnproduct.asp?id=31 Q5 web page] [http://www.fenixlight.com/viewnproduct.asp?id=55 R2 web page] Reviews: [http://www.flashlightreviews.com/reviews/fenix_pd30.htm Flashlight Reviews] [http://www.light-reviews.com/fenix_pd30_r4/ Light Reviews (R4)]. The PD30 was discontinued in 2013.


'''PD31''' - 2xCR123A/18650 6-mode light with Cree XP-G R5 LED. This is a special edition of the PD30 that takes 18650 batteries, introduced in December 2010. [[ANSI-NEMA FL-1|ANSI]] Lumen output is 2, 67, 124, and 304 lumens (140m throw) plus SOS and Strobe.
'''PD31''' - 2xCR123A/18650 6-mode light with Cree XP-G R5 LED. This is a special edition of the PD30 that takes 18650 batteries, introduced in December 2010. [[ANSI-NEMA FL-1|ANSI]] Lumen output is 2, 67, 124, and 304 lumens (140m throw) plus SOS and Strobe.
Brted
confirmed, developer
1,668

edits

Retrieved from "https://flashlightwiki.com/Special:MobileDiff/1702"