Flashlight Wiki

EagleTac: Difference between revisions

Page Discussion

EagleTac (view source)

Revision as of 12:23, 25 January 2014

6 bytes removed ,  25 January 2014
replace LED's with LEDs
(update links to light-reviews)
(replace LED's with LEDs)
Line 7: Line 7:
EagleTac has three different ways of quoting lumen output for its lights: emitter lumens, out-the-front (OTF), or [[ANSI-NEMA FL-1|ANSI]] FL-1, so be careful when comparing light outputs of different versions. If the output type isn't listed, it is probably emitter lumens which they used up until late 2010.
EagleTac has three different ways of quoting lumen output for its lights: emitter lumens, out-the-front (OTF), or [[ANSI-NEMA FL-1|ANSI]] FL-1, so be careful when comparing light outputs of different versions. If the output type isn't listed, it is probably emitter lumens which they used up until late 2010.


'''D25 Clicky Series''' This is a series of lights with the same user interface. All are 10-mode reverse clicky flashlights with 3 constant modes in addition to 7 flashy modes available by cycling through the constant modes twice. When switched to High, the light will be in Turbo mode for 90 seconds before backing down to High. With the head loosened, all 10 modes are available. With the head tightened, the modes alternate between Turbo and Strobe. A group of lower modes (Moonlight, Low, Med instead of Low, Medium, High) is available by twisting the head back and forth three times from the loosened position. Mode memory is optional via three twists from the tightened position. Originally this light was introduced with five different LED's available: Cree XM-L U2, Cree XP-G S2, or the new Cree XT-E R5 in addition to neutral Cree XM-L T6 and Cree XP-G R4. However the initial batch of XT-E lights were recalled due to problems with beam quality. In September 2012 EagleTac announced that Cree XP-G2 LED's would be available. In April 2013 lights with the Cree XM-L2 were available. A clicky body was also made available to allow people who had twisty D25 mini's to convert their light to a clicky. The clicky series was introduced in May 2012.
'''D25 Clicky Series''' This is a series of lights with the same user interface. All are 10-mode reverse clicky flashlights with 3 constant modes in addition to 7 flashy modes available by cycling through the constant modes twice. When switched to High, the light will be in Turbo mode for 90 seconds before backing down to High. With the head loosened, all 10 modes are available. With the head tightened, the modes alternate between Turbo and Strobe. A group of lower modes (Moonlight, Low, Med instead of Low, Medium, High) is available by twisting the head back and forth three times from the loosened position. Mode memory is optional via three twists from the tightened position. Originally this light was introduced with five different LEDs available: Cree XM-L U2, Cree XP-G S2, or the new Cree XT-E R5 in addition to neutral Cree XM-L T6 and Cree XP-G R4. However the initial batch of XT-E lights were recalled due to problems with beam quality. In September 2012 EagleTac announced that Cree XP-G2 LEDs would be available. In April 2013 lights with the Cree XM-L2 were available. A clicky body was also made available to allow people who had twisty D25 mini's to convert their light to a clicky. The clicky series was introduced in May 2012.


:'''D25A Clicky''' 1xAA with a Cree XM-L U2 LED, output is 0.5, 8, 75, and 122 ANSI lumens on Turbo. With a Cree XP-G S2, output is 0.5, 9, 71, or 110 lumens. The XM-L2 U2 version, introduced in April 2013, has maximum output of 141 ANSI lumens. On a lithium-ion 14500 battery the light loses the lower modes. Also available in a titanium version. Introduced in May 2012. [http://www.eagletac.com/html/d25arc/specs.html Web page].
:'''D25A Clicky''' 1xAA with a Cree XM-L U2 LED, output is 0.5, 8, 75, and 122 ANSI lumens on Turbo. With a Cree XP-G S2, output is 0.5, 9, 71, or 110 lumens. The XM-L2 U2 version, introduced in April 2013, has maximum output of 141 ANSI lumens. On a lithium-ion 14500 battery the light loses the lower modes. Also available in a titanium version. Introduced in May 2012. [http://www.eagletac.com/html/d25arc/specs.html Web page].
Line 13: Line 13:
:'''D25A2 Clicky''' 2xAA with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI lumens on Turbo. With a Cree XP-G S2, output is 0.5, 22, 149, or 219 lumens. The XM-L2 U2 LED version, introduced in April 2013, has output levels of 0.5, 24, 211, or 318 ANSI lumens. [http://www.eagletac.com/html/d25a2rc/specs.html Web page]. Review: [http://light-reviews.com/Flashlight-detail/eagletac-d25a2-clicky-cree-xp-g-s2-review/ Light Reviews].
:'''D25A2 Clicky''' 2xAA with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI lumens on Turbo. With a Cree XP-G S2, output is 0.5, 22, 149, or 219 lumens. The XM-L2 U2 LED version, introduced in April 2013, has output levels of 0.5, 24, 211, or 318 ANSI lumens. [http://www.eagletac.com/html/d25a2rc/specs.html Web page]. Review: [http://light-reviews.com/Flashlight-detail/eagletac-d25a2-clicky-cree-xp-g-s2-review/ Light Reviews].


:'''D25C Clicky''' 1xCR123A with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI lumens. With the XP-G S2 LED output is 0.5, 22, 149, or 219 lumens. The April 2013 version with Cree XM-L2 has maximum output of 317 ANSI lumens (also in neutral). Neutral LED's will have 7-10% lower output. [http://www.eagletac.com/html/d25crc/specs.html Web page]. Reviews: Light Reviews ([http://light-reviews.com/Flashlight-detail/eagletac-d25c-clicky-cree-xp-g-s2-review/ XP-G], [http://light-reviews.com/Flashlight-detail/eagletac-d25c-clicky-cree-xm-l-u2/ XM-L]).
:'''D25C Clicky''' 1xCR123A with a Cree XM-L U2 LED, output is 0.5, 22, 182, or 277 ANSI lumens. With the XP-G S2 LED output is 0.5, 22, 149, or 219 lumens. The April 2013 version with Cree XM-L2 has maximum output of 317 ANSI lumens (also in neutral). Neutral LEDs will have 7-10% lower output. [http://www.eagletac.com/html/d25crc/specs.html Web page]. Reviews: Light Reviews ([http://light-reviews.com/Flashlight-detail/eagletac-d25c-clicky-cree-xp-g-s2-review/ XP-G], [http://light-reviews.com/Flashlight-detail/eagletac-d25c-clicky-cree-xm-l-u2/ XM-L]).


:'''D25C2 Clicky''' 2xCR123A or 1x17670 with a Cree XM-L U2 LED, output is 5, 50, 370, or 548 ANSI lumens on Turbo. The XP-G S2 output is 5, 32, 238, or 344 lumens. Also available in titanium. [http://www.eagletac.com/html/d25c2rc/specs.html Web page].
:'''D25C2 Clicky''' 2xCR123A or 1x17670 with a Cree XM-L U2 LED, output is 5, 50, 370, or 548 ANSI lumens on Turbo. The XP-G S2 output is 5, 32, 238, or 344 lumens. Also available in titanium. [http://www.eagletac.com/html/d25c2rc/specs.html Web page].
Line 37: Line 37:
'''GX25L2 Turbo''' - Turbo version of GX25L2 has larger 62mm head (opposed to 39.5mm on the regular version) for greater throw. [http://www.eagletac.com/html/gx25l2t/specs.html Web page].
'''GX25L2 Turbo''' - Turbo version of GX25L2 has larger 62mm head (opposed to 39.5mm on the regular version) for greater throw. [http://www.eagletac.com/html/gx25l2t/specs.html Web page].


'''M3C4''' 5-mode 2x18650 or 4xCR123A light with large reflector and selector ring for modes. Also has 3 hidden flashing modes. The light has a modular reflector for either 3 separate LED's or one central LED. A single Cree XM-L2 U2 LED has maximum output of 1020 ANSI lumens. The version with 3 Cree XM-L2 U2 LED's has maximum output of 1348 ANSI lumens. [[Luminus]] SST-50 version maximum output of 800 [[Terminology#OTF|OTF]] lumens as does the 3 Cree XP-G R5 version. 3 Cree XR-E R2 version is 600 lumens. 3 Cree XR-E Q4 neutral white has somewhat less. Cree MC-E cool white version is 625 lumens while a warm white version has less. A version with a Cree XM-L LED was announced in December 2010 with 748 ANSI lumens. [http://www.eagletac.com/html/m3c4/specs.html Web page]. Reviews: [http://www.candlepowerforums.com/vb/showthread.php?296381 Selfbuilt (SST-50)], [http://archive.light-reviews.com/eagletac_m3c4_smooth_reflector/ Light Reviews (SST-50)], [http://archive.light-reviews.com/eagletac_m3c4_xm-l/ Light Reviews (XM-L)], [http://www.candlepowerforums.com/vb/showthread.php?t=306590 Selfbuilt (XM-L)]
'''M3C4''' 5-mode 2x18650 or 4xCR123A light with large reflector and selector ring for modes. Also has 3 hidden flashing modes. The light has a modular reflector for either 3 separate LEDs or one central LED. A single Cree XM-L2 U2 LED has maximum output of 1020 ANSI lumens. The version with 3 Cree XM-L2 U2 LEDs has maximum output of 1348 ANSI lumens. [[Luminus]] SST-50 version maximum output of 800 [[Terminology#OTF|OTF]] lumens as does the 3 Cree XP-G R5 version. 3 Cree XR-E R2 version is 600 lumens. 3 Cree XR-E Q4 neutral white has somewhat less. Cree MC-E cool white version is 625 lumens while a warm white version has less. A version with a Cree XM-L LED was announced in December 2010 with 748 ANSI lumens. [http://www.eagletac.com/html/m3c4/specs.html Web page]. Reviews: [http://www.candlepowerforums.com/vb/showthread.php?296381 Selfbuilt (SST-50)], [http://archive.light-reviews.com/eagletac_m3c4_smooth_reflector/ Light Reviews (SST-50)], [http://archive.light-reviews.com/eagletac_m3c4_xm-l/ Light Reviews (XM-L)], [http://www.candlepowerforums.com/vb/showthread.php?t=306590 Selfbuilt (XM-L)]


'''MX25L2''' - 4-mode side clicky light which includes a charger port for a 2x32650 battery pack. Modes are selected by rotating the head. With a Luminus SST-90 N3 LED the output levels are 14, 156, 792, or 2120 ANSI lumens (resets to 1890 lumens after the light has been on for a short time). A Luminus SBT-90 MB has 45% less output but greater throw. An alternative set of 4 modes (with two strobe modes) is available as well as several hidden flashy modes. Announced in September 2012. [http://www.eagletac.com/html/mx25l2/specs.html Web page].
'''MX25L2''' - 4-mode side clicky light which includes a charger port for a 2x32650 battery pack. Modes are selected by rotating the head. With a Luminus SST-90 N3 LED the output levels are 14, 156, 792, or 2120 ANSI lumens (resets to 1890 lumens after the light has been on for a short time). A Luminus SBT-90 MB has 45% less output but greater throw. An alternative set of 4 modes (with two strobe modes) is available as well as several hidden flashy modes. Announced in September 2012. [http://www.eagletac.com/html/mx25l2/specs.html Web page].
Line 75: Line 75:
'''M2SC4''' - [[Cree]] MC-E M-bin (also available with neutral white Cree MC-E K-bin)
'''M2SC4''' - [[Cree]] MC-E M-bin (also available with neutral white Cree MC-E K-bin)


'''M2XC4''' Cluster of 3 Cree Q3 XR-E LED's. Reviews: [http://archive.light-reviews.com/eagletac_m2xc4/ Light Reviews]
'''M2XC4''' Cluster of 3 Cree Q3 XR-E LEDs. Reviews: [http://archive.light-reviews.com/eagletac_m2xc4/ Light Reviews]


'''P10A''' - 1xAA 2-mode forward clicky. Output with Cree XR-E Q5 is 130 lumens on high, 37 on low. Select modes by tightening or loosening head. 26 mm head. [http://www.eagletac.com/flashlights/p10a.html Web Page] Reviews: [http://archive.light-reviews.com/eagletac_p10a/ Light Reviews]
'''P10A''' - 1xAA 2-mode forward clicky. Output with Cree XR-E Q5 is 130 lumens on high, 37 on low. Select modes by tightening or loosening head. 26 mm head. [http://www.eagletac.com/flashlights/p10a.html Web Page] Reviews: [http://archive.light-reviews.com/eagletac_p10a/ Light Reviews]
Brted
confirmed, developer
1,668

edits

Retrieved from "https://flashlightwiki.com/Special:MobileDiff/1855"