Terminology: Difference between revisions
no edit summary
(expand on de-dome) |
No edit summary |
||
| Line 58: | Line 58: | ||
:2. Dino Direct, a budget dealer | :2. Dino Direct, a budget dealer | ||
;de-dome: to remove the round plastic dome over the die on an LED; if the beam is properly focused by a reflector, the overall throw can be increased since the reflector sees a smaller die. Overall output typically goes down. Domes are not usually meant to be removed and it can be tricky removing one without damaging the LED. One method is soaking the LED in gasoline for 24 hours which makes the dome fall off. | ;de-dome: to remove the round plastic dome over the die on an LED; if the beam is properly focused by a reflector, the overall throw can be increased since the reflector sees a smaller die. Overall output typically goes down and the tint will probably change with good or bad results. Domes are not usually meant to be removed and it can be tricky removing one without damaging the LED. One method is soaking the LED in gasoline for 24 hours which makes the dome fall off. | ||
;die: the part of the LED that actually produces light. It is usually yellow and protected by a clear dome. | ;die: the part of the LED that actually produces light. It is usually yellow and protected by a clear dome. | ||