|
|
| Line 9: |
Line 9: |
| Below are output numbers for different currents for the various brightness bins of more current LED models (see [[Old Cree LEDs]] for past models). There is more information available with the '''[http://pct.cree.com/ Cree Product Characterization Tool]''', an online calculator that allows you to look up output based on more factors. The numbers on this page, like those given by the PCT, are based on charts in the LED datasheets. | | Below are output numbers for different currents for the various brightness bins of more current LED models (see [[Old Cree LEDs]] for past models). There is more information available with the '''[http://pct.cree.com/ Cree Product Characterization Tool]''', an online calculator that allows you to look up output based on more factors. The numbers on this page, like those given by the PCT, are based on charts in the LED datasheets. |
|
| |
|
| ==MC-E==
| |
|
| |
| An older 4-die LED available with four of the same color dies or the MC-E Color with four different color dies (white, red, green, blue). The maximum current is 700mA with a Vf of 3.4V, though this varies from one color to another. Bins run from G (240 lumens) to M (430 lumens) at 350 mA. The white quadrant of the MC-E Color is available in cool white (A5) or neutral white (A4).
| |
|
| |
| [http://www.cree.com/products/pdf/XLampMC-E.pdf Cree MC-E datasheet]
| |
|
| |
| The MC-E was widely used in high-power flashlights like the EagleTac M2SC4, Fenix TK40, iTP A6 Polestar, and JETBeam M1X with advertised output of up to 700 lumens. The color version is in the Quark RGB (with neutral white or cool white available) but although the LED allows mixing of colors, the Quark RGB is switched to one color at a time.
| |
|
| |
| [[File:Cree_mc-e.jpg|thumb|Cree MC-E multi-die LED]]
| |
| {|class="wikitable" style="text-align: center; width: 400px;"
| |
| |+ [[Brightness Bins]] for Cree MC-E<BR>(max is N bin)
| |
| |-
| |
| !Bin !! 1400mA <BR>(350mA/die)<BR>100% !! 2800mA <BR>(700mA/die)<BR>175%
| |
| |-
| |
| |H || 280-320 || 490-560
| |
| |-
| |
| |J || 320-370 || 560-648
| |
| |-
| |
| |K || 370-430 || 648-753
| |
| |-
| |
| |M || 430-490 || 753-858
| |
| |-
| |
| |'''N*''' || 490-550 || 858-962
| |
| |-
| |
| |P || 550-620 || 962-1085
| |
| |}
| |
|
| |
|
| ==MT-G2== | | ==MT-G2== |
| Line 66: |
Line 40: |
| |} | | |} |
|
| |
|
| ==XB-D==
| |
|
| |
| [[File:Creexb-d.jpg|thumb|Cree XB-D is similar to the XT-E but smaller.]]Very compact LED (the die is mounted on a chip 2.45 mm square opposed to 3.45 mm square for XP series) introduced in February 2012, promising lower cost. Should provide similar brightness to XP-E LEDs. First available units were warm white with Q2 brightness bin (at 350mA). This LED is used in some budget Ozark Trail 3xAAA lights at Walmart. The XB-D is binned at an operating temperature of 85° C instead of 25°, so in order to directly compare its output to other LEDs that are typically binned at 25 degrees, the output numbers in the table below have been increased by 14% from what is shown in the datasheet (see [[XB-D output]] for the 85° numbers). Can be driven up to 1000mA. [http://www.cree.com/products/pdf/XLampXB-D.pdf Datasheet], [http://www.cree.com/news-and-events/cree-news/press-releases/2012/january/120111-xbd press release].
| |
|
| |
| {|class="wikitable" style="text-align: center; width: 400px;"
| |
| |+ Brightness Bins for Cree XB-D at 25° C
| |
| |-
| |
| !Bin !! 350mA<BR>100% !! 700mA<BR>172% !! 1000mA<BR>222%
| |
| |- style="background: #fdb"
| |
| |Q2 || 100-107 || 172-184 || 222-238
| |
| |- style="background: #fdb"
| |
| |Q3 || 107-114 || 184-196 || 238-253
| |
| |- style="background: #fdb"
| |
| |Q4 || 114-122 || 196-210 || 253-271
| |
| |- style="background: #fdb"
| |
| |Q5 || 122-130 || 210-224 || 271-289
| |
| |- style="background: #ffb"
| |
| |R2 || 130-139 || 224-239 || 289-309
| |
| |- style="background: #ffb"
| |
| |R3 || 139-148 || 239-255 || 309-329
| |
| |- style="background: #ffb"
| |
| |'''R4*''' || 148-158 || 255-272 || 329-351
| |
| |}
| |
|
| |
| ==XM-L==
| |
|
| |
| [[File:Cree-xml.jpg|thumb|Cree XM-L LED with 6 yellow strips and 3 bonding wires]]Widely used in high power flashlights, this larger die LED was first available in November 2011, offering efficacy of 160 lumens per watt at 350mA. Output is as high as 340 lumens at 700mA (bin U3, which is still rare) therefore it is more efficient and puts out more light at any current than earlier single-die Cree LEDs. However the biggest improvement to overall output is the XM-L can be driven to 3000mA for 1100 lumens of output. Because the XM-L is binned at 700mA, the bin numbers do not correlate exactly to those of the smaller die LEDs which are binned at 350mA. The LED die is 2mm x 2mm on a 5mm x 5mm substrate with 6 yellow strips and 3 bonding wires as opposed to the XP-G with 4 strips and 2 bonding wires and the XP-E with 3 strips and 2 bonding wires. The first production lights to feature the XM-L were versions of the [[ThruNite]] Catapult V2 (first to ship), [[EagleTac]] M3C4, a [[4Sevens]] Quark MiNi, and the [[JETBeam]] M1xm, introduced in December 2010, but budget retailer KaiDomain had LEDs and [[P60]] drop-ins as well as P60 lights around the same time. Neutral and warm tints began shipping in March 2011. [http://www.cree.com/news-and-events/cree-news/press-releases/2010/november/101110-xml Press release] [http://www.cree.com/products/pdf/XLampXM-L.pdf Cree XM-L datasheet]
| |
|
| |
| {|class="wikitable" style="text-align: center; width: 400px;"
| |
| |+ Brightness Bins for Cree XM-L<BR>(max is U3 bin)
| |
| |-
| |
| !Bin !! 700mA<BR>100% !! 1000mA<BR>137.5% !! 1500mA<BR>195% !! 3000mA<BR>325%
| |
| |- style="background: #ddf"
| |
| |T2 || 200-220 || 275-303 || 390-429 || 650-715
| |
| |- style="background: #ddf"
| |
| |T3 || 220-240 || 303-330 || 429-468 || 715-780
| |
| |- style="background: #ddf"
| |
| |T4 || 240-260 || 330-358 || 468-507 || 780-845
| |
| |- style="background: #ddf"
| |
| |T5 || 260-280 || 358-385 || 507-546 || 845-910
| |
| |- style="background: #ddf"
| |
| |T6 || 280-300 || 385-413 || 546-585 || 910-975
| |
| |- style="background: #ede"
| |
| |U2 || 300-320 || 413-440 || 585-624 || 975-1040
| |
| |- style="background: #ede"
| |
| |'''U3*''' || 320-340 || 440-468 || 624-663 || 1040-1105
| |
| |}
| |
|
| |
|
| ==XM-L2== | | ==XM-L2== |
| Line 148: |
Line 75: |
| |} | | |} |
|
| |
|
| ==XP-C==
| |
|
| |
| [[File:Cree-xpc.jpg|thumb|Cree XP-C LED has a smaller die than the XP-E]]A lower current version of the XP-E with a smaller die. Maximum current 500mA and Vf of 3.5V. Bins up to Q4 (100 lumens) in cool white, Q2 in neutral white (84.7 lumens) and P3 in warm white (73.9 lumens). Looks like the XP-E, but the die has 2 yellow strips and 1 bonding wire instead of 3 strips and 2 bonding wires. The XP-C is used in the Streamlight Microstream and some Mini Maglites.
| |
|
| |
| [http://www.cree.com/products/pdf/XLampXP-C.pdf Cree XP-C datasheet]<br clear="all">
| |
|
| |
| ==XP-E==
| |
|
| |
| Introduced in Fall of 2008, the XP-E shrunk the XR-E by 80% (though it uses the same die), now 3.45 mm square. It is available, in white (cool, neutral, and warm), blue, green, amber, red, and red-orange. For cool white, bins are Q3, Q4, Q5, R2 and R3 with output from 93.9 to 122 lumens. Neutral white bins are from P4 to Q4 (100 lumens min) and warm white bins range from P2 to Q2 (87.4 lumens min).
| |
|
| |
| [http://www.cree.com/products/pdf/XLampXP-E.pdf Cree XP-E datasheet]
| |
|
| |
| This LED is used in the [[NiteCore]] Defender Infinity, early Quarks (R2, neutral whites used a Q3), the iTP A series EOS and S series lights, EagleTac P100 and T100 series.
| |
|
| |
| The XP-E has 3 strips on the die as opposed to 2 on the XP-C and 4 on the XP-G.
| |
|
| |
| [[File:Cree_xp-e.jpg|thumb|Cree XP-E LED]]
| |
| {|class="wikitable" style="text-align: center; width: 400px;"
| |
| |+ Brightness Bins for Cree XR-E, XP-E<BR>(max bin for XP-E is R4, XR-E is R2)
| |
| |-
| |
| !Bin !! 350mA<BR>100% !! 700mA<BR>170% !! 1000mA<BR>220%
| |
| |- style="background: #fdd"
| |
| |P4 || 80.6-87.4 || 137-149 || 177-192
| |
| |- style="background: #fdb"
| |
| |Q2 || 87.4-93.9 || 149-160 || 192-207
| |
| |- style="background: #fdb"
| |
| |Q3 || 93.9-100 || 160-170 || 207-220
| |
| |- style="background: #fdb"
| |
| |Q4 || 100-107 || 170-182 || 220-233
| |
| |- style="background: #fdb"
| |
| |Q5 || 107-114 || 182-194 || 233-251
| |
| |- style="background: #ffb"
| |
| |R2 || 114-122 || 194-207 || 251-268
| |
| |- style="background: #ffb"
| |
| |R3 || 122-130 || 207-221 || 268-286
| |
| |- style="background: #ffb"
| |
| |'''R4*''' || 130-139 || 221-236 || 286-306
| |
| |}
| |
|
| |
|
| ==XP-E2== | | ==XP-E2== |
| Line 215: |
Line 104: |
| |} | | |} |
|
| |
|
| ==XP-G==
| |
|
| |
| Same size package as the XP-E, but with a larger die. Therefore the resulting beam has a little more flood. It is available in varying output bins from R2 to S3 (S2 and S3 are rare and not always the best tints). Maximum current is 1500mA and Vf of 3.3V with efficacy of 141 lumens per watt. [http://www.cree.com/products/pdf/XLampXP-G.pdf Cree XP-G datasheet], [http://www.cree.com/news-and-events/cree-news/press-releases/2009/september/090930-xp-g-led press release].
| |
|
| |
| The XP-G R5 began widespread use in 2010 after being adopted early by 4Sevens and EagleTac. The limited edition titanium Quarks were among the first to use the XP-G, with an R4 bin. S2 bins became available in November 2010 but only in Quark and iTP special edition lights. Special edition matte-finish titanium Quark Mini and Turbo models were the first to feature S3 bins, shipping in December 2010.
| |
|
| |
| [[File:Cree_xp-g.jpg|thumb|Cree XP-G R5 LED]]
| |
| {|class="wikitable" style="text-align: center; width: 400px;"
| |
| |+ Brightness Bins for Cree XP-G<BR>(max is S3 bin)
| |
| |-
| |
| !Bin !! 350mA<BR>100% !! 700mA<BR>187% !! 1000mA<BR>250% !! 1500mA<BR>333%
| |
| |- style="background: #ffb"
| |
| |R2 || 114-122 || 213-228 || 285-305 || 380-406
| |
| |- style="background: #ffb"
| |
| |R3 || 122-130 || 228-243 || 305-325 || 406-433
| |
| |- style="background: #ffb"
| |
| |R4 || 130-139 || 243-260 || 325-348 || 433-463
| |
| |- style="background: #ffb"
| |
| |R5 || 139-148 || 260-277 || 348-370 || 463-493
| |
| |- style="background: #dfd"
| |
| |S2 || 148-156 || 277-292 || 370-390 || 493-520
| |
| |- style="background: #dfd"
| |
| |'''S3*''' || 156-164 || 292-307 || 390-410 || 520-547
| |
| |- style="background: #dfd"
| |
| |S4 || 164-172 || 307-322 || 410-430 || 547-573
| |
| |}
| |
|
| |
|
| ==XP-G2== | | ==XP-G2== |
| Line 303: |
Line 166: |
| |- style="background: #c9f" | | |- style="background: #c9f" |
| |'''V6*''' || 546-569 || 736-766 || 921-959 || 1227-1278 | | |'''V6*''' || 546-569 || 736-766 || 921-959 || 1227-1278 |
| |}
| |
|
| |
| ==XR-C==
| |
|
| |
| Same size as XR-E (7mm x 9mm) but is designed for less current (500mA max). The die itself is smaller than the XR-E (same as the one in the XP-C). The maximum bin is Q2 with 87.4 lumens for cool white. It is available in white (cool, neutral, and warm) as well as royal blue, blue, green, amber, red-orange, and red. Vf is 3.5 volts at 350mA. Identifiable by the metal ring around the dome and a LED die with only two yellow strips and one bonding wire.
| |
|
| |
| [http://www.cree.com/products/pdf/XLampXR-C.pdf Cree XR-C datasheet]
| |
|
| |
| The XR-C is used in retail lights made by Coleman, River Rock, and Energizer.
| |
|
| |
| ==XR-E==
| |
|
| |
| [[File:Cree_xre.jpg|thumb|Cree XR-E LED easily identified by the metal ring around the LED]]Introduced in the Fall of 2006 the XR-E was widely used in a number of different flashlights, with cool white, neutral white, and warm white colors available in addition to blue, royal blue, and green. Common bin numbers are P4, Q2, Q3, Q4, Q5, and R2 with increasing output from 80 lumens to 122 lumens at 350 mA and a Vf of 3.3V, but with much greater output available with higher currents. The size is 7 mm x 9 mm and you will often see this referred to as a 7090 XR-E. The die itself was available as the EZ1000 at first and then the smaller EZ900. Because the EZ900 can have the same overall output as the larger EZ1000 but in a smaller form, it should provide 23% greater intensity and throw (the EZ1000 is 1 mm square and the EZ900 is 0.9 mm square).
| |
|
| |
| [http://www.cree.com/products/pdf/XLamp7090XR-E.pdf Cree XR-E datasheet]
| |
|
| |
| This LED was very widely used, featured in flashlights by [[Fenix]], [[JETBeam]], [[NiteCore]] D10, and [[EagleTac]] P20 and T20 series, and is still available in some [[budget lights]]. The neutral white version was used in Nitecore EZ series. It is easily recognized by the metal ring around the die with 3 yellow strips and 2 bonding wires.<br clear="all">
| |
|
| |
| ==XT-E==
| |
|
| |
| [[File:Cree-xte.jpg|thumb|Cree XT-E LED]]Introduced in February 2012, the XT-E has the same size chip as the XP series but seems to have a wider viewing angle for more flood and less throw. Can be driven up to 1.5A and available in bins up to R5 (at 350mA). This LED is binned at an operating temperature of 85° C instead of 25°, so in order to directly compare its output to other LEDs that are typically binned at 25 degrees, the numbers in the table below have been increased by 14% (see [[XT-E output]] for the 85° numbers). Cree introduced the XT-E as a low-cost, high efficiency LED capable of 148 lumens per watt at 350mA, offering higher lumens per dollar. The LED is not a flat square, but has an X shaped hill on the surface. The beam is like a small XM-L with a large hotspot and some varying tint across the beam. [[EagleTac]] announced that the XT-E would be an option in its D25 clicky series in April 2012, but XT-E lights were never actually released, supposedly due to beam quality issues. At about the same time, KaiDomain offered P60 drop-ins and flashlights with the XT-E. Cree uses the XT-E LED in its line of household light bulbs, introduced in 2013. [http://www.cree.com/products/pdf/XLampXT-E.pdf Datasheet], [http://www.cree.com/news-and-events/cree-news/press-releases/2012/february/120207-xte press release].
| |
|
| |
| {|class="wikitable" style="text-align: center; width: 400px;"
| |
| |+ Brightness Bins for Cree XT-E at 25° C<BR>(max is R5 bin)
| |
| |-
| |
| !Bin !! 350mA<BR>100% !! 700mA<BR>178% !! 1000mA<BR>230% !! 1500mA<BR>302%
| |
| |- style="background: #fdb"
| |
| |Q5 || 122-130 || 217-231 || 280-299 || 369-404
| |
| |- style="background: #ffb"
| |
| |R2 || 130-139 || 231-247 || 299-320 || 404-421
| |
| |- style="background: #ffb"
| |
| |R3 || 139-148 || 247-263 || 320-341 || 421-448
| |
| |- style="background: #ffb"
| |
| |R4 || 148-158 || 263-282 || 341-365 || 448-479
| |
| |- style="background: #ffb"
| |
| |'''R5*''' || 158-169 || 282-300 || 365-388 || 479-510
| |
| |- style="background: #dfd"
| |
| |S2 || 169-178 || 282-316 || 388-409 || 510-537
| |
| |} | | |} |