Fenix: Difference between revisions
→Past Lights
| Line 85: | Line 85: | ||
'''E0''' - 1xAAA single mode 5mm Nichia LED. Introduced in September 2006. | '''E0''' - 1xAAA single mode 5mm Nichia LED. Introduced in September 2006. | ||
'''E1''' - 1xAAA 1-mode twisty with Nichia Regel LED. Introduced in July 2006. | '''E1''' - 1xAAA 1-mode twisty with Nichia Regel LED. Introduced in July 2006. | ||
'''E11''' - 1xAA 2-mode forward clicky with maximum output of 105 ANSI lumens (72m throw) and Low of 32 lumens. Uses a [[Terminology#TIR|TIR]] lens designed for floody output. Tighten head for High, loosen for Low. Introduced in August 2011. A silver version was introduced in April 2012 and otuput was updated to 115 lumens (74m throw) and Low of 38 lumens. | '''E11''' - 1xAA 2-mode forward clicky with maximum output of 105 ANSI lumens (72m throw) and Low of 32 lumens. Uses a [[Terminology#TIR|TIR]] lens designed for floody output. Tighten head for High, loosen for Low. Introduced in August 2011. A silver version was introduced in April 2012 and otuput was updated to 115 lumens (74m throw) and Low of 38 lumens. | ||
| Line 102: | Line 102: | ||
==== L Series ==== | ==== L Series ==== | ||
'''L0D''' - 1xAAA 5-mode twisty. Modes: Medium, Low, High, Strobe, SOS. Originally featured a Rebel LED. Later a L0D CE version was introduced with a Cree 7090 XR-E LED. Replaced by LD01. | '''L0D''' - 1xAAA 5-mode twisty. Modes: Medium, Low, High, Strobe, SOS. Originally featured a Rebel LED. Later a L0D CE version was introduced with a Cree 7090 XR-E LED. Replaced by LD01. | ||
[[File:Fenix-l2d-p2d.jpg|thumb|300px|The Fenix L2D and P2D in olive]]'''L0P''' - 1xAAA 1-mode twisty with Luxeon I (R bin). The L0P-SE was a 3-mode twisty. Later models may have included a Luxeon III. | [[File:Fenix-l2d-p2d.jpg|thumb|300px|The Fenix L2D and P2D in olive]]'''L0P''' - 1xAAA 1-mode twisty with Luxeon I (R bin). The L0P-SE was a 3-mode twisty. Later models may have included a Luxeon III. | ||
'''L1D''' - 1xAA 6-mode light. With head tightened the modes are Turbo and Strobe. With head loosened a quarter turn, the modes are low, medium, high, and SOS. Several different versions were introduced over time including the original with a Luxeon Rebel 80 LED with a maximum brightness of 90 lumens. The L1D CE featured a Cree 7090 XR-E P4 LED with maximum brightness of 90 lumens. The final version was the L1D Premium Q5 with 120 lumens of brightness. [http://www.fenixlight.com/flashlight/fenixl1d.htm web page] See [http://www.candlepowerforums.com/vb/showthread.php?t=175758 comparison]). Replaced by LD10. | '''L1D''' - 1xAA 6-mode light. With head tightened the modes are Turbo and Strobe. With head loosened a quarter turn, the modes are low, medium, high, and SOS. Several different versions were introduced over time including the original with a Luxeon Rebel 80 LED with a maximum brightness of 90 lumens. The L1D CE featured a Cree 7090 XR-E P4 LED with maximum brightness of 90 lumens. The final version was the L1D Premium Q5 with 120 lumens of brightness. [http://www.fenixlight.com/flashlight/fenixl1d.htm web page] See [http://www.candlepowerforums.com/vb/showthread.php?t=175758 comparison]). Replaced by LD10. | ||
'''L1P''' - 1xAA 1-mode reverse clicky with Luxeon I (R bin). | '''L1P''' - 1xAA 1-mode reverse clicky with Luxeon I (R bin). | ||
'''L1S''' - 1xAA two-mode light. Used a Luxeon I (R bin) with output of 10 or 37 lumens. Change modes by tightening or loosening the head. | '''L1S''' - 1xAA two-mode light. Used a Luxeon I (R bin) with output of 10 or 37 lumens. Change modes by tightening or loosening the head. | ||
'''L1T''' - 1xAA two-mode reverse clicky. Early versions came with a Luxeon III LED (output is 10 or 55 lumens). The v2.0 had a Cree Q2 LED (output is 16 or 98 lumens). Change modes by tightening or loosening the head. | '''L1T''' - 1xAA two-mode reverse clicky. Early versions came with a Luxeon III LED (output is 10 or 55 lumens). The v2.0 had a Cree Q2 LED (output is 16 or 98 lumens). Change modes by tightening or loosening the head. | ||
'''L2D''' - 2xAA 6-mode light in the LxD series. Same as L1D but with a longer body to hold a second AA battery. Replaced by LD20. Maximum brightness for different versions: Original (140), Premium 100 (175), CE (135), CE Premium Q5 (12, 53, 107, and 180). [http://www.fenixlight.com/flashlight/fenixl2d.htm web page] CPFReviews: [http://www.cpfreviews.com/Fenix-L2DCE.php L2D CE], [http://www.cpfreviews.com/Fenix-L2DCE-Premium-Q5.php L2D Premium Q5] | '''L2D''' - 2xAA 6-mode light in the LxD series. Same as L1D but with a longer body to hold a second AA battery. Replaced by LD20. Maximum brightness for different versions: Original (140), Premium 100 (175), CE (135), CE Premium Q5 (12, 53, 107, and 180). [http://www.fenixlight.com/flashlight/fenixl2d.htm web page] CPFReviews: [http://www.cpfreviews.com/Fenix-L2DCE.php L2D CE], [http://www.cpfreviews.com/Fenix-L2DCE-Premium-Q5.php L2D Premium Q5] | ||
'''L2P''' - 2xAA 1-mode light with a Luxeon I (R bin) LED. It was introduced in 2006. The V2 edition had a Luxeon III LED and was introduced in 2007. Reviews: CPF Reviews [http://www.cpfreviews.com/Fenix-L2P.php L2P V1], [http://www.cpfreviews.com/Fenix-L2PV2.php L2P V2], | '''L2P''' - 2xAA 1-mode light with a Luxeon I (R bin) LED. It was introduced in 2006. The V2 edition had a Luxeon III LED and was introduced in 2007. Reviews: CPF Reviews [http://www.cpfreviews.com/Fenix-L2P.php L2P V1], [http://www.cpfreviews.com/Fenix-L2PV2.php L2P V2], | ||
'''L2S''' - 2xAA 2-mode clicky. Used a Luxeon I (R bin) with output of 10 or 45 lumens. Change modes by tightening or loosening the head. [http://www.fenixlight.com/flashlight/fenixl2s.htm web page | '''L2S''' - 2xAA 2-mode clicky. Used a Luxeon I (R bin) with output of 10 or 45 lumens. Change modes by tightening or loosening the head. [http://www.fenixlight.com/flashlight/fenixl2s.htm web page] | ||
'''L2T''' - 2xAA two-mode light based on L1T. Luxeon III LED generates 10 or 55 lumens. The v2.0 Cree XR-E Q2 LED generates 16 or 152 lumens. Change modes by tightening or loosening the head. [http://www.fenixlight.com/flashlight/fenixl2t.htm web page | '''L2T''' - 2xAA two-mode light based on L1T. Luxeon III LED generates 10 or 55 lumens. The v2.0 Cree XR-E Q2 LED generates 16 or 152 lumens. Change modes by tightening or loosening the head. [http://www.fenixlight.com/flashlight/fenixl2t.htm web page] | ||
'''LD03''' - 1xAAA 3-mode reverse clicky pen light. Brightness levels are 4, 22, and 71 lumens. To be released in April 2011. | '''LD03''' - 1xAAA 3-mode reverse clicky pen light. Brightness levels are 4, 22, and 71 lumens. To be released in April 2011. | ||
| Line 130: | Line 130: | ||
==== P Series ==== | ==== P Series ==== | ||
'''P1''' - 1xCR123A 1-mode twisty. The first Fenix CR123A light. Had a Luxeon III LED with 55 lumens output. The P1-CE (Cree edition) used a Cree XR-E with 90 lumens output. Replaced by P1D. [http://www.fenixlight.com/flashlight/fenixp1.htm web page | '''P1''' - 1xCR123A 1-mode twisty. The first Fenix CR123A light. Had a Luxeon III LED with 55 lumens output. The P1-CE (Cree edition) used a Cree XR-E with 90 lumens output. Replaced by P1D. [http://www.fenixlight.com/flashlight/fenixp1.htm web page] | ||
'''P1D''' - 1xCR123A 5-mode twisty. Head and Body only (no separate tail). With Cree 7090 XR-E LED (Q5) output levels are 95, 180, and 16 lumens with strobe and SOS. Originally came with Luxeon III. Replaced by PD10. [http://www.fenixlight.com/flashlight/fenixp1d.htm web page | '''P1D''' - 1xCR123A 5-mode twisty. Head and Body only (no separate tail). With Cree 7090 XR-E LED (Q5) output levels are 95, 180, and 16 lumens with strobe and SOS. Originally came with Luxeon III. Replaced by PD10. [http://www.fenixlight.com/flashlight/fenixp1d.htm web page] | ||
'''P2D''' - 1xCR123A 6-mode light in the LxD family. Requires a separate tail piece due to the larger diameter of the body for the CR123A, but the head is the same. Maximum brightness for different versions: Original (140), Premium 100 (175), CE (135), CE Premium Q5 (180). Replaced by PD20. [http://www.fenixlight.com/flashlight/fenixp2d.htm web page | '''P2D''' - 1xCR123A 6-mode light in the LxD family. Requires a separate tail piece due to the larger diameter of the body for the CR123A, but the head is the same. Maximum brightness for different versions: Original (140), Premium 100 (175), CE (135), CE Premium Q5 (180). Replaced by PD20. [http://www.fenixlight.com/flashlight/fenixp2d.htm web page] | ||
'''P3D''' - 2xCR123A 6-mode light in the LxD family, but with a different head due to the higher voltage of 2 CR123 batteries. A single li-ion cell will not work due to the lower voltage and lack of a boost circuit in the flashlight. Also the tube 16.8 mm, so 17 and 18 mm li-ions would not fit. Two li-ion 16340's willl work despite the higher voltage. Output varies depending on version with the original P3D with a Luxeon Rebel 80 LED yielding 9, 40, 90, and 160 lumens. The P3D Premium 100 with a Rebel 100 yields 11, 50, 112, and 200 lumens. The P3D CE with a Cree 7090 XR-E P4 LED yields 9, 40, 90, and 160 lumens. The P3D Premium Q5 yields 12, 53, 120, and 215 lumens. Replaced by PD30. [http://www.fenixlight.com/flashlight/fenixp3d.htm web page] | '''P3D''' - 2xCR123A 6-mode light in the LxD family, but with a different head due to the higher voltage of 2 CR123 batteries. A single li-ion cell will not work due to the lower voltage and lack of a boost circuit in the flashlight. Also the tube 16.8 mm, so 17 and 18 mm li-ions would not fit. Two li-ion 16340's willl work despite the higher voltage. Output varies depending on version with the original P3D with a Luxeon Rebel 80 LED yielding 9, 40, 90, and 160 lumens. The P3D Premium 100 with a Rebel 100 yields 11, 50, 112, and 200 lumens. The P3D CE with a Cree 7090 XR-E P4 LED yields 9, 40, 90, and 160 lumens. The P3D Premium Q5 yields 12, 53, 120, and 215 lumens. Replaced by PD30. [http://www.fenixlight.com/flashlight/fenixp3d.htm web page] | ||
| Line 140: | Line 140: | ||
'''PD10''' - 1xCR123A 3-mode twisty. Cree XP-E R2 LED with 3 brightness levels: 6, 95, and 190 lumens. Successor to P1D, but with more knurling, more cylindrical shape, and a pocket clip. [http://www.fenixlight.com/viewproduct.asp?id=110 web page] PD10 Titan: Titanium version with Cree XP-G R5 (7, 110, and 216 lumens), a limited edition made in December 2009. The PD10 was discontinued in 2012. | '''PD10''' - 1xCR123A 3-mode twisty. Cree XP-E R2 LED with 3 brightness levels: 6, 95, and 190 lumens. Successor to P1D, but with more knurling, more cylindrical shape, and a pocket clip. [http://www.fenixlight.com/viewproduct.asp?id=110 web page] PD10 Titan: Titanium version with Cree XP-G R5 (7, 110, and 216 lumens), a limited edition made in December 2009. The PD10 was discontinued in 2012. | ||
'''PD20''' - 1xCR123A 6-mode reverse clicky. Part of the LDxx family. Output is similar to LD20. Cree XR-E Q5 output is 9, 47, 94, or 180 lumens. Later upgraded to XP-E R2 LED with a more cylindrical shape with body knurling, trapezoidal threads (not compatible with earlier versions), a pocket clip, and now the body and tail cap are one piece. R2 output is 9, 48, 96, or 190 lumens with a larger hotspot. [http://www.fenixlight.com/viewnproduct.asp?id=31 Q5 web page] [http://www.fenixlight.com/viewnproduct.asp?id=59 R2 web page] | '''PD20''' - 1xCR123A 6-mode reverse clicky. Part of the LDxx family. Output is similar to LD20. Cree XR-E Q5 output is 9, 47, 94, or 180 lumens. Later upgraded to XP-E R2 LED with a more cylindrical shape with body knurling, trapezoidal threads (not compatible with earlier versions), a pocket clip, and now the body and tail cap are one piece. R2 output is 9, 48, 96, or 190 lumens with a larger hotspot. [http://www.fenixlight.com/viewnproduct.asp?id=31 Q5 web page] [http://www.fenixlight.com/viewnproduct.asp?id=59 R2 web page] The PD20 was discontinued in 2013. | ||
'''PD30''' - 2xCR123A 6-mode light with Cree XP-G R5 LED. Successor to P3D. Better tailcap knurling, improved tailcap design with better lanyard ring, easier to turn head which is also an anti-roll hexagon shape, lower low, medium, and high, smoother tailcap switch. Longer runtime on low, medium, and high. The latest update with an XP-G R5 has an ouput of 10, 67, 124, and 257 [[ANSI-NEMA FL-1|ANSI]] lumens and was introduced in November 2010. The previous version with an XP-G R4 LED was introduced in December 2009 and has an output of 11, 75, 140, and 265 lumens. The XR-E R2 LED version has an output of 10, 70, 125, and 235 lumens (sometimes called a PD30+) and was introduced in September 2009. Output of the original XR-E Q5 is 9, 70, 117 or 220 lumens. The Q5 edition has triangular knurling (not compatible with R2, R4 or R5 versions), less knurling on the body, and lacks a pocket clip. [http://www.fenixlight.com/viewnproduct.asp?id=31 Q5 web page] [http://www.fenixlight.com/viewnproduct.asp?id=55 R2 web page | '''PD30''' - 2xCR123A 6-mode light with Cree XP-G R5 LED. Successor to P3D. Better tailcap knurling, improved tailcap design with better lanyard ring, easier to turn head which is also an anti-roll hexagon shape, lower low, medium, and high, smoother tailcap switch. Longer runtime on low, medium, and high. The latest update with an XP-G R5 has an ouput of 10, 67, 124, and 257 [[ANSI-NEMA FL-1|ANSI]] lumens and was introduced in November 2010. The previous version with an XP-G R4 LED was introduced in December 2009 and has an output of 11, 75, 140, and 265 lumens. The XR-E R2 LED version has an output of 10, 70, 125, and 235 lumens (sometimes called a PD30+) and was introduced in September 2009. Output of the original XR-E Q5 is 9, 70, 117 or 220 lumens. The Q5 edition has triangular knurling (not compatible with R2, R4 or R5 versions), less knurling on the body, and lacks a pocket clip. [http://www.fenixlight.com/viewnproduct.asp?id=31 Q5 web page] [http://www.fenixlight.com/viewnproduct.asp?id=55 R2 web page] [http://archive.light-reviews.com/fenix_pd30_r4/ Light Reviews (R4)]. The PD30 was discontinued in 2013. | ||
'''PD31''' - 2xCR123A/18650 6-mode light with Cree XP-G R5 LED. This is a special edition of the PD30 that takes 18650 batteries, introduced in December 2010. [[ANSI-NEMA FL-1|ANSI]] Lumen output is 2, 67, 124, and 304 lumens (140m throw) plus SOS and Strobe. In 2013 a limited XP-G2 R5 edition of the PD31 was released in the EU. This version has a lumen output of 3, 80, 145, and 360 lumens (170m throw) plus SOS and Strobe. | '''PD31''' - 2xCR123A/18650 6-mode light with Cree XP-G R5 LED. This is a special edition of the PD30 that takes 18650 batteries, introduced in December 2010. [[ANSI-NEMA FL-1|ANSI]] Lumen output is 2, 67, 124, and 304 lumens (140m throw) plus SOS and Strobe. In 2013 a limited XP-G2 R5 edition of the PD31 was released in the EU. This version has a lumen output of 3, 80, 145, and 360 lumens (170m throw) plus SOS and Strobe. | ||
| Line 162: | Line 162: | ||
'''TK10''' - 2xCR123A 2-mode Cree XR-E Q5 light. Two modes available by turning bezel: 60 or 225 lumens. Larger head designed for greater throw. An "improved" version of the T1 with a removable grip ring, aluminum bezel, and removable clip. Performance is not changed. Introduced in July 2008. Reviews: [http://archive.light-reviews.com/fenix_tk10_q5/ Light Reviews] | '''TK10''' - 2xCR123A 2-mode Cree XR-E Q5 light. Two modes available by turning bezel: 60 or 225 lumens. Larger head designed for greater throw. An "improved" version of the T1 with a removable grip ring, aluminum bezel, and removable clip. Performance is not changed. Introduced in July 2008. Reviews: [http://archive.light-reviews.com/fenix_tk10_q5/ Light Reviews] | ||
'''TK12''' - 2xCR123A with Cree XP-G R5 LED. 3 modes, each with two brightness levels: Outdoor is 65 or 280 lumens (245 [[ANSI-NEMA FL-1|ANSI]] lumens, 179m throw); Camping is 11 or 120 lumens; Hunting is strobe or 280 lumens. Remembers last mode. Originally featured a Cree XR-E Q5 LED with Outdoor mode of 50 or 225 lumens; Camping 5 or 90 lumens; Hunting strobe or 225 lumens. Introduced in July 2009, it was upgraded to XR-E R2 in December 2009 and to XP-G R5 in March 2010. The Q5 and R2 versions had an orange peel reflector while the R5 was initially available either with OP or SMO reflectors and later only with a smooth reflector. The TK12 has been discontinued in 2012. [http://www.fenixlight.com/viewnproduct.asp?id=48 web page] Reviews: [http://archive.light-reviews.com/fenix_tk12/ Light Reviews], | '''TK12''' - 2xCR123A with Cree XP-G R5 LED. 3 modes, each with two brightness levels: Outdoor is 65 or 280 lumens (245 [[ANSI-NEMA FL-1|ANSI]] lumens, 179m throw); Camping is 11 or 120 lumens; Hunting is strobe or 280 lumens. Remembers last mode. Originally featured a Cree XR-E Q5 LED with Outdoor mode of 50 or 225 lumens; Camping 5 or 90 lumens; Hunting strobe or 225 lumens. Introduced in July 2009, it was upgraded to XR-E R2 in December 2009 and to XP-G R5 in March 2010. The Q5 and R2 versions had an orange peel reflector while the R5 was initially available either with OP or SMO reflectors and later only with a smooth reflector. The TK12 has been discontinued in 2012. [http://www.fenixlight.com/viewnproduct.asp?id=48 web page] Reviews: [http://archive.light-reviews.com/fenix_tk12/ Light Reviews], | ||
'''TK20''' - 2xAA 2-mode light (45 or 150 lumens) selected by turning bezel. Neutral white Cree 7090 XR-E LED Q2. Features a rubber grip on the body (gray or yellow). Forward clicky. Introduced in August 2008. Reviews: [http://archive.light-reviews.com/fenix_tk20/index.html Light Reviews], | '''TK20''' - 2xAA 2-mode light (45 or 150 lumens) selected by turning bezel. Neutral white Cree 7090 XR-E LED Q2. Features a rubber grip on the body (gray or yellow). Forward clicky. Introduced in August 2008. Reviews: [http://archive.light-reviews.com/fenix_tk20/index.html Light Reviews], | ||
'''TK21''' - 2xCR123A/1x18650 4-mode forward clicky with Cree XM-L U2 and a deep reflector for better throw. Modes are selected with a side switch near bezel. Output levels are 5, 58, 180, and 468 ANSI lumens (214m throw). Remembers last mode it was in. The TK21 was released in April 2011 and it was discontinued in 2013. Review: [http://flashlightnews.net/forum/index.php?topic=2590 erns] | '''TK21''' - 2xCR123A/1x18650 4-mode forward clicky with Cree XM-L U2 and a deep reflector for better throw. Modes are selected with a side switch near bezel. Output levels are 5, 58, 180, and 468 ANSI lumens (214m throw). Remembers last mode it was in. The TK21 was released in April 2011 and it was discontinued in 2013. Review: [http://flashlightnews.net/forum/index.php?topic=2590 erns] | ||
| Line 170: | Line 170: | ||
'''TK30''' - 2xCR123A 3 modes, each with two brightness levels: Searching is 100 or 370 lumens; Camping is 12 or 175 lumens; Hunting is strobe or 370 lumens. The extension tube allows 4xCR123 or 2x18650 batteries with increased output: Searching is 100 or 630 lumens; Camping is 12 or 175 lumens; Hunting is strobe or 630 lumens. Cree MC-E multi-chip LED. Very large head for greater throw. The TK30 was introduced in October 2009 and it was discontinued in 2011. [http://www.fenixlight.com/viewnproduct.asp?id=57 web page] | '''TK30''' - 2xCR123A 3 modes, each with two brightness levels: Searching is 100 or 370 lumens; Camping is 12 or 175 lumens; Hunting is strobe or 370 lumens. The extension tube allows 4xCR123 or 2x18650 batteries with increased output: Searching is 100 or 630 lumens; Camping is 12 or 175 lumens; Hunting is strobe or 630 lumens. Cree MC-E multi-chip LED. Very large head for greater throw. The TK30 was introduced in October 2009 and it was discontinued in 2011. [http://www.fenixlight.com/viewnproduct.asp?id=57 web page] | ||
'''TK40''' - 8xAA 8-mode Cree MC-E light with last-mode memory. Fenix's first multidie LED flashlight, has a Cree MC-E in a textured reflector powered by 8 AA batteries but can use 4 in an emergency. Output modes are 13, 93, 277, and 630 lumens. Double-click the tail switch at any output level to cycle through strobe, slow flash, SOS, fast flash. Forward clicky. Introduced in May 2009. [http://www.fenixlight.com/viewnproduct.asp?id=41 web page] Reviews: [http://archive.light-reviews.com/fenix_tk40/ Light Reviews], | '''TK40''' - 8xAA 8-mode Cree MC-E light with last-mode memory. Fenix's first multidie LED flashlight, has a Cree MC-E in a textured reflector powered by 8 AA batteries but can use 4 in an emergency. Output modes are 13, 93, 277, and 630 lumens. Double-click the tail switch at any output level to cycle through strobe, slow flash, SOS, fast flash. Forward clicky. Introduced in May 2009. [http://www.fenixlight.com/viewnproduct.asp?id=41 web page] Reviews: [http://archive.light-reviews.com/fenix_tk40/ Light Reviews], | ||
'''TK70''' - 4xD 6-mode light with three Cree XM-L's and two side clickies near the head for power and modes. Modes are 20, 300, 930, and 2200 ANSI lumens plus strobe and SOS. Introduced in July 2011. Reviews: [http://flashlightnews.net/forum/index.php?topic=2612.0 erns], [http://www.candlepowerforums.com/vb/showthread.php?321024 HKJ] | '''TK70''' - 4xD 6-mode light with three Cree XM-L's and two side clickies near the head for power and modes. Modes are 20, 300, 930, and 2200 ANSI lumens plus strobe and SOS. Introduced in July 2011. Reviews: [http://flashlightnews.net/forum/index.php?topic=2612.0 erns], [http://www.candlepowerforums.com/vb/showthread.php?321024 HKJ] | ||