4Sevens: Difference between revisions
Move S2 to Limited Editions
(add Quark "X" AA2 and 123-2; revert other Quarks to R5 output now that S2's are gone) |
(Move S2 to Limited Editions) |
||
Line 29: | Line 29: | ||
=== Quark === | === Quark === | ||
[[File:Quark-123-2.jpg|thumb|Quark 123² Tactical]]Quark lights were introduced in May 2009 with Cree XP-E R2 LED's. Models are available in Regular or Tactical version. The power switch on the Tactical version is a forward clicky that protrudes from the back of the light and prevents tailstanding. The Regular version has a reverse clicky that does not protrude and can tailstand. The Regular version has max and strobe available with the bezel tightened while with a loosened bezel you use the reverse clicky to cycle through moonlight, low, medium, high, SOS, and beacon modes. The Tactical version has only two modes (tightened or loosened), but can have any of the 8 modes programmed in. The tactical models suffer from [[Terminology#preflash|preflash]] where sometimes if the light is set to come on in low it will flash very bright when turned on. All of the Quarks have a mild preflash in Moonlight mode where the light flashes to Low before going to Moonlight. Parts are generally interchangeable but only the head of the 123² and 123² Turbo can handle the higher voltage of 2 CR123A or 2 lithium-ion batteries. All Quarks have orange peel reflectors. The clip is reversible in the sense that the body tube is reversible (the head and tail threads are identical), therefore the light can be assembled for a bezel-up clip or bezel-down. All of the main Quarks were updated to Cree XP-G R5 emitters in December 2009 | [[File:Quark-123-2.jpg|thumb|Quark 123² Tactical]]Quark lights were introduced in May 2009 with '''Cree XP-E R2''' LED's. Models are available in Regular or Tactical version. The power switch on the Tactical version is a forward clicky that protrudes from the back of the light and prevents tailstanding. The Regular version has a reverse clicky that does not protrude and can tailstand. The Regular version has max and strobe available with the bezel tightened while with a loosened bezel you use the reverse clicky to cycle through moonlight, low, medium, high, SOS, and beacon modes. The Tactical version has only two modes (tightened or loosened), but can have any of the 8 modes programmed in. The tactical models suffer from [[Terminology#preflash|preflash]] where sometimes if the light is set to come on in low it will flash very bright when turned on. All of the Quarks have a mild preflash in Moonlight mode where the light flashes to Low before going to Moonlight. Parts are generally interchangeable but only the head of the 123² and 123² Turbo can handle the higher voltage of 2 CR123A or 2 lithium-ion batteries. All Quarks have orange peel reflectors. The clip is reversible in the sense that the body tube is reversible (the head and tail threads are identical), therefore the light can be assembled for a bezel-up clip or bezel-down. All of the main Quarks were updated to '''Cree XP-G R5''' emitters in December 2009. In September 2011 '''Quark "X"''' versions of the AA² and 123² were introduced in both regular and tactical versions. | ||
'''Limited Editions''' In May 2010, '''warm white''' (tint 7A3 or 7B4) XP-G Q5 LED's were shipped after a pre-order period (Preon2, 123² Tactical, AA² Tactical, MiNi 123, MiNi AA, MiNi CR2, 123² Turbo, and AA² Turbo). In June 2010, '''neutral white''' (tint 4C0 or 4D0) XP-G R4 versions were introduced (Preon2, 123² Regular and Tactical, AA² Regular and Tactical, MiNi 123, MiNi AA, and MiNi CR2). Both of the 2010 limited editions featured "green packaging" (a ziplock bag) instead of coming in a box and were reduced in price by $2. When the standard LED was the XP-E R2, a limited edition '''neutral white''' (tint 5A) XP-E Q3 was available. A limited edition '''titanium version''' of all of the main lights came out in September 2009 featuring a Cree XP-G R4 emitter (the first 1000 were numbered). | '''Limited Editions''' The entire line was available with '''Cree XP-G S2''' emitters in November 2010. In May 2010, '''warm white''' (tint 7A3 or 7B4) XP-G Q5 LED's were shipped after a pre-order period (Preon2, 123² Tactical, AA² Tactical, MiNi 123, MiNi AA, MiNi CR2, 123² Turbo, and AA² Turbo). In June 2010, '''neutral white''' (tint 4C0 or 4D0) XP-G R4 versions were introduced (Preon2, 123² Regular and Tactical, AA² Regular and Tactical, MiNi 123, MiNi AA, and MiNi CR2). Both of the 2010 limited editions featured "green packaging" (a ziplock bag) instead of coming in a box and were reduced in price by $2. When the standard LED was the XP-E R2, a limited edition '''neutral white''' (tint 5A) XP-E Q3 was available. A limited edition '''titanium version''' of all of the main lights came out in September 2009 featuring a Cree XP-G R4 emitter (the first 1000 were numbered). | ||
'''Quark 123''' - 1xCR123A Cree XP-G R5 light with output is 0.2, 4, 22, 85, and 205 OTF lumens. | '''Quark 123''' - 1xCR123A Cree XP-G R5 light with output is 0.2, 4, 22, 85, and 205 OTF lumens. |