Brted
Joined 27 November 2010
no edit summary
No edit summary |
No edit summary |
||
Line 12: | Line 12: | ||
'''[[iTP]] A3 EOS Upgraded''' [[File:Itpa3eos.jpg|thumb|iTP A3 EOS]]3-mode (MLH) 1xAAA twisty with Cree XP-E R2. Got a second generation black one after misplacing the original (which I later found and sold to my brother). The replacement has LMH, tighter threads (no flashing), and better PWM. Also got a used titanium version of the original. | '''[[iTP]] A3 EOS Upgraded''' [[File:Itpa3eos.jpg|thumb|iTP A3 EOS]]3-mode (MLH) 1xAAA twisty with Cree XP-E R2. Got a second generation black one after misplacing the original (which I later found and sold to my brother). The replacement has LMH, tighter threads (no flashing), and better PWM. Also got a used titanium version of the original. | ||
'''Lumapower MRV clone''' Bought this host only from Manafont and added a neutral XM-L T5 and 2.8A NANJG driver set to 3 modes. Nice thrower, very similar to Ultrafire C8. | |||
'''Mr.Lite BLF AA-Y4E''' 4-mode 1xAA/14500 Cree XR-E R2 reverse clicky. Customized for [http://budgetlightforum.com/node/755 Budget Light Forum] by Mr.Lite and sold by Manafont. Modes are 1, 6, 70 and 140 lumens (200+ on 14500). [http://budgetlightforum.com/node/825 My review] [http://www.manafont.com/product_info.php/blf-aay4e-cree-xre-r2-4mode-led-flashlight-black-p-4582 Manafont] | '''Mr.Lite BLF AA-Y4E''' 4-mode 1xAA/14500 Cree XR-E R2 reverse clicky. Customized for [http://budgetlightforum.com/node/755 Budget Light Forum] by Mr.Lite and sold by Manafont. Modes are 1, 6, 70 and 140 lumens (200+ on 14500). [http://budgetlightforum.com/node/825 My review] [http://www.manafont.com/product_info.php/blf-aay4e-cree-xre-r2-4mode-led-flashlight-black-p-4582 Manafont] | ||
Line 24: | Line 26: | ||
'''Solarforce L2p''' 1x18650 P60 host in black ordered from Solarforce Sales (formerly ITC). Put a UltraFire 3-mode Cree XM-L drop-in in it. | '''Solarforce L2p''' 1x18650 P60 host in black ordered from Solarforce Sales (formerly ITC). Put a UltraFire 3-mode Cree XM-L drop-in in it. | ||
'''[[Sunwayman]] V10A''' 1xAA or 1x14500 light with a magnetic control ring controlling output that varies from a fraction of a lumen to nearly 300 lumens on a li-ion battery (140 lumens on AA). Got a good deal on this from DinoDirect, but still my most expensive light. [http://budgetlightforum.com/node/5150 My review]. | |||
'''Tank007 E07 BLF Edition''' 1xAA twisty with Osram Golden Dragon Plus LED. The BLF Edition has 3 non-flashy modes, including a nice Low. Memory sets a few seconds after the light is off. [http://budgetlightforum.com/node/5247 My review]. | |||
'''<STRIKE>TrustFire XP-E F23</STRIKE>''' 1xAAA 3-mode (LHS) stainless steel light with mode memory. Good dog walking light. Not much runtime on a 10440 (15 minutes or less). I wound up buying a couple of these to give away and then gave away the pill in mine when one of the gifts stopped working.[http://budgetlightforum.com/node/121 My Review] [http://www.dealextreme.com/details.dx/sku.24291~r.72863811 DX] | '''<STRIKE>TrustFire XP-E F23</STRIKE>''' 1xAAA 3-mode (LHS) stainless steel light with mode memory. Good dog walking light. Not much runtime on a 10440 (15 minutes or less). I wound up buying a couple of these to give away and then gave away the pill in mine when one of the gifts stopped working.[http://budgetlightforum.com/node/121 My Review] [http://www.dealextreme.com/details.dx/sku.24291~r.72863811 DX] | ||
Line 37: | Line 43: | ||
'''UltraFire X1''' 1x18650 3-mode (High, Low, Strobe) light with Cree XR-E Q5 from Manafont. Body is like a larger version of the AKOray K-106. Bought to modify with a neutral XP-G R4 and a 3-mode 1.4A driver from [http://www.kaidomain.com/ProductDetails.aspx?ProductId=11218&AffiliateId=1890 KD]. | '''UltraFire X1''' 1x18650 3-mode (High, Low, Strobe) light with Cree XR-E Q5 from Manafont. Body is like a larger version of the AKOray K-106. Bought to modify with a neutral XP-G R4 and a 3-mode 1.4A driver from [http://www.kaidomain.com/ProductDetails.aspx?ProductId=11218&AffiliateId=1890 KD]. | ||
''' | '''UniqueFire AA-S1''' 1xAA/14500 1-mode light with Osram Golden Dragon LED. Same body as AKOray K-106. [http://www.dealextreme.com/details.dx/sku.24220~r.72863811 DX] | ||
'''UniqueFire S10''' 1xAA 6-mode XR-E R2 from KD. Burned out the driver using a 14500, now it is direct drive 1-mode [http://budgetlightforum.com/node/122 My Review] [http://www.kaidomain.com/ProductDetails.aspx?ProductId=10303&AffiliateId=1890 KD] | '''UniqueFire S10''' 1xAA 6-mode XR-E R2 from KD. Burned out the driver using a 14500, now it is direct drive 1-mode [http://budgetlightforum.com/node/122 My Review] [http://www.kaidomain.com/ProductDetails.aspx?ProductId=10303&AffiliateId=1890 KD] | ||
'''UniqueFire UF-2100''' 1x18650 3-mode XM-L T6 from a DinoDirect group buy. Really bright compact light drawing over 3 amps on High. Default modes are High, Low, and Strobe, but the driver can be modified for 5 modes, adding a much needed Medium and much less useful SOS. [http://budgetlightforum.com/node/5118 My review]. | |||
'''<STRIKE>ZY-30</STRIKE>''' 3xAAA 3-mode (MHS) Cree XR-E Q5 Flood to Throw light [http://budgetlightforum.com/node/197 My Review]. I gave this light away. | '''<STRIKE>ZY-30</STRIKE>''' 3xAAA 3-mode (MHS) Cree XR-E Q5 Flood to Throw light [http://budgetlightforum.com/node/197 My Review]. I gave this light away. | ||
Line 73: | Line 81: | ||
'''18650''' - Red and Black 2400 mAh 3.7V protected Trustfire - supposed to be the best from DX [http://www.dealextreme.com/details.dx/sku.20392~r.72863811 DX] Lasts about 20% longer than the gray Ultrafires listed above. See my [http://budgetlightforum.com/node/346 comparison]. | '''18650''' - Red and Black 2400 mAh 3.7V protected Trustfire - supposed to be the best from DX [http://www.dealextreme.com/details.dx/sku.20392~r.72863811 DX] Lasts about 20% longer than the gray Ultrafires listed above. See my [http://budgetlightforum.com/node/346 comparison]. | ||
'''18650''' - XTAR 2600mAh. These are pretty decent batteries, but not much more expensive than Trustfires. Bought from szwholesale via a BLF group buy. $13.50 a pair. | |||
==Modding Parts== | ==Modding Parts== | ||
Line 82: | Line 92: | ||
'''<U>KD 13.5mm Driver</U>''' No details to speak of, but this 5-mode driver could be useful in fixing AA lights with burned out drivers where standard 17mm drivers are too big [http://www.kaidomain.com/ProductDetails.aspx?ProductID=11063&AffiliateId=1890 KD] | '''<U>KD 13.5mm Driver</U>''' No details to speak of, but this 5-mode driver could be useful in fixing AA lights with burned out drivers where standard 17mm drivers are too big [http://www.kaidomain.com/ProductDetails.aspx?ProductID=11063&AffiliateId=1890 KD] | ||
'''<U>NANJG 105</U>''' 8x7135 driver advertised at KD as 1100mA, but should be 2800mA. Seems similar to the Shiningbeam 2.8A driver, though Shiningbeam is now selling a slightly different version that appears to be a 106. Has stars on the back so you can set mode groups. 5 modes by default but can be set to 3-mode L-M-H with memory. [http://www.kaidomain.com/ProductDetails.aspx?ProductID=10995&AffiliateId=1890 KD] | '''<U>NANJG 105</U>''' 8x7135 driver advertised at KD as 1100mA, but should be 2800mA. Seems similar to the Shiningbeam 2.8A driver below, though Shiningbeam is now selling a slightly different version that appears to be a 106. Has stars on the back so you can set mode groups. 5 modes by default but can be set to 3-mode L-M-H with memory. [http://www.kaidomain.com/ProductDetails.aspx?ProductID=10995&AffiliateId=1890 KD] | ||
'''NANJG 112A''' 0.9-4.2V 1000mA driver from KD with stars on the back that can be soldered to provide different modes. Supposedly buck/boost with an inductor. Seems well-regulated since current draw increases as voltage of li-ion decreases, but current draw declines with voltage on 1.2V NiMH. Works with AA or li-ion, but with 2xAA the low-voltage warning will cause flashing. 3-mode grouping has low and medium pretty close together. Low mode does not seem to use PWM. [http://budgetlightforum.com/node/232 My Review] [http://www.kaidomain.com/ProductDetails.aspx?ProductId=10243&AffiliateId=1890 KD] (sold out) | '''NANJG 112A''' 0.9-4.2V 1000mA driver from KD with stars on the back that can be soldered to provide different modes. Supposedly buck/boost with an inductor. Seems well-regulated since current draw increases as voltage of li-ion decreases, but current draw declines with voltage on 1.2V NiMH. Works with AA or li-ion, but with 2xAA the low-voltage warning will cause flashing. 3-mode grouping has low and medium pretty close together. Low mode does not seem to use PWM. [http://budgetlightforum.com/node/232 My Review] [http://www.kaidomain.com/ProductDetails.aspx?ProductId=10243&AffiliateId=1890 KD] (sold out) | ||
Line 96: | Line 106: | ||
'''<U>NANJG 28</U>''' Double-sided driver. Has 5, 3 (LMH), or 8 modes selectable by clicky. DX version advertises only 5 modes and some people at KD aren't able to change mode groups [http://www.kaidomain.com/ProductDetails.aspx?ProductID=5313 KD] [http://www.dealextreme.com/details.dx/sku.15880~r.72863811 DX] | '''<U>NANJG 28</U>''' Double-sided driver. Has 5, 3 (LMH), or 8 modes selectable by clicky. DX version advertises only 5 modes and some people at KD aren't able to change mode groups [http://www.kaidomain.com/ProductDetails.aspx?ProductID=5313 KD] [http://www.dealextreme.com/details.dx/sku.15880~r.72863811 DX] | ||
'''[http://www.shiningbeam.com/servlet/the-132/3-dsh-Mode-Regulated-Circuit-Board/Detail Shiningbeam 3-mode 2.5A driver]''' Put in the drop-in with my MC-E "M bin" | '''[http://www.shiningbeam.com/servlet/the-132/3-dsh-Mode-Regulated-Circuit-Board/Detail Shiningbeam 3-mode 2.5A driver]''' Put in the drop-in with my MC-E "M bin". | ||
===Other Stuff=== | ===Other Stuff=== |