Difference between revisions of "ANSI-NEMA FL-1"

ANSI-NEMA FL-1 (view source)

17 bytes added , 19:00, 18 July 2011

some rewording

confirmed, developer

1,668

edits

@@ Line 11: / Line 11: @@
 ===Runtime===
-The amount of continuous runtime (in minutes) for the light output to drop to 10% of its original value (measured 30 seconds after turning the light on). This test is done in an integrating sphere just like the lumen test with light output measured every 15 minutes. In the past, some testers used 50% to be a little more practical, but with most batteries, the drop-off is usually pretty quick and the time between 50% and 10% usually is not long.
+The amount of continuous runtime (in minutes) until the light output drops to 10% of its original value (measured 30 seconds after turning the light on). This test is done in an integrating sphere just like the lumen test with light output measured every 15 minutes. 10% of brightness probably gives inflated runtime numbers. In the past, some testers used 50% to be a little more practical, but with most batteries, the drop-off is usually pretty quick and the time between 50% and 10% usually is not long.
 ===Peak Beam Intensity===
@@ Line 52: / Line 52: @@
 [http://www.nema.org/stds/fl1.cfm NEMA store]
-[http://www.nextorch.com '''NEXTORCH''']
 [http://www.nema.org/stds/complimentary-docs/upload/FL%201%202009%20final.pdf FL-1 Table of Contents and committee members]