Difference between revisions of "AVR Drivers"

AVR Drivers (view source)

Revision as of 07:32, 9 January 2014

157 bytes added , 07:32, 9 January 2014

m

extreme burner fail

JackCY

confirmed

36

edits

@@ Line 41: / Line 41: @@
 '''[http://www.nongnu.org/avrdude/ AVRDUDE]''' - It is a command line interface (DOS). If you use Tido's programs then you don't need to compile anything: those programs are ready to be loaded. If you install MHV AVR Tools/WinAVR, AVRDUDE will be included. Does not support ATtiny13A, have to use a workaround and pretend it's ATtiny13.
-[http://extremeelectronics.co.in/avr-tutorials/gui-software-for-usbasp-based-usb-avr-programmers/ '''eXtreme Burner - AVR'''] - Or if you do not like AVRDUDE and want something with GUI, you can try eXtreme Burner - AVR, download latest version at the bottom of the page under release. It can read/write (download/upload) and it also has the required driver for USBasp in the installation. If you only want to write a new firmware (already compiled Tido's, DrJones's, ...) this should be all you need. Does support ATtiny13A.
+[http://extremeelectronics.co.in/avr-tutorials/gui-software-for-usbasp-based-usb-avr-programmers/ '''eXtreme Burner - AVR'''] - Or if you do not like AVRDUDE and want something with GUI, you can try eXtreme Burner - AVR, download latest version at the bottom of the page under release. It can read/write (download/upload) and it also has the required driver for USBasp in the installation. If you only want to write a new firmware (already compiled Tido's, DrJones's, ...) this should be all you need. Does support ATtiny13A. Does not seem to write correctly nlite driver though. Either does not understand the hex format or ATtiny13A write support is bad. It reads and erases fine.
 ==== USBasp Driver ====