confirmed, developer
1,668
edits
Difference between revisions of "JETBeam"
→Current Lights: PA01 review
(→Current Lights: PA01 review) |
|||
| Line 25: | Line 25: | ||
'''M2S''' - 4-mode 3xCR123A with large head. Uses Luminus SST-50 LED for 750 lumens output (OTF). Tighten bezel for maximum output for 3 minutes then steps down to Mid (450 lumens). Loosen bezel for Mid, Low (50 lumens), and 15 Hz strobe. Optional extension tube allows 4xCR123A or 2x18650. Also can use 16340 lithium ions batteries. Introduced in February 2010. | '''M2S''' - 4-mode 3xCR123A with large head. Uses Luminus SST-50 LED for 750 lumens output (OTF). Tighten bezel for maximum output for 3 minutes then steps down to Mid (450 lumens). Loosen bezel for Mid, Low (50 lumens), and 15 Hz strobe. Optional extension tube allows 4xCR123A or 2x18650. Also can use 16340 lithium ions batteries. Introduced in February 2010. | ||
'''PA01''' - 4-mode 1xAA light with Cree XP-G R5. Modes are fixed at 6, | '''PA01''' - 4-mode 1xAA light with Cree XP-G R5. Modes are fixed at 6, 65, 140 [[ANSI-NEMA FL-1|ANSI]] lumens (65m throw) plus strobe. Review: [http://www.candlepowerforums.com/vb/showthread.php?t=307908 selfbuilt] | ||
'''RRT-0''' - 1xCR123A 5-mode forward clicky with selector ring. With a Cree XP-G R5 the output levels are 1, 10, 25, 50, and 240 lumens on CR123A while an AA yields a max of 180 lumens. The original R2 output levels are 1, 10, 25, 50, or 200 lumens with CR123A. Optional extender allows AA or 14500 to be used. AA output levels are 1, 10, 25, 50, or 180 lumens. Introduced in November 2009. | '''RRT-0''' - 1xCR123A 5-mode forward clicky with selector ring. With a Cree XP-G R5 the output levels are 1, 10, 25, 50, and 240 lumens on CR123A while an AA yields a max of 180 lumens. The original R2 output levels are 1, 10, 25, 50, or 200 lumens with CR123A. Optional extender allows AA or 14500 to be used. AA output levels are 1, 10, 25, 50, or 180 lumens. Introduced in November 2009. | ||