Flashlight Wiki

Difference between revisions of "Solarforce"

Solarforce (view source)

Revision as of 19:31, 27 January 2012

308 bytes added ,  19:31, 27 January 2012
add Gladiator, move L2i and L2r to new Past Lights section
(Undo revision 939 by Brted (talk))
(add Gladiator, move L2i and L2r to new Past Lights section)
Line 9: Line 9:
'''L2''' - The original light is a 1x18650 host. Available in matte black or shiny titanium gray. The 2011 edition has a 3 amp switch. The tail switch is exposed so this light does not tailstand. Prior to 2011, black was glossy, gunmetal gray had a greenish tint, and a matte sand color was available. Prior to 2009, the body tube was not wide enough for 188650 batteries.
'''L2''' - The original light is a 1x18650 host. Available in matte black or shiny titanium gray. The 2011 edition has a 3 amp switch. The tail switch is exposed so this light does not tailstand. Prior to 2011, black was glossy, gunmetal gray had a greenish tint, and a matte sand color was available. Prior to 2009, the body tube was not wide enough for 188650 batteries.


'''L2P''' - Similar to the L2 but with a forward clicky, better [[Materials#Anodizing|anodizing]] (Type III HA instead of Type II), a less aggressive bezel, milder knurling, and the ability to tailstand. Available in black, gray, desert yellow, and blue.  Prior versions were also available in black or gray only and came with a reverse clicky switch designed for more like 2 amp instead of 3. They also had a slightly longer body tube that could result in connection problems with the battery (particularly shorter unprotected batteries or with dropins that have short springs).
'''L2P''' - Similar to the L2 but with a forward clicky, better [[Materials#Anodizing|anodizing]] (Type III HA instead of Type II), a less aggressive bezel, milder knurling, and the ability to tailstand. Available in black or gray with 2011 limited editions in gold or blue.  Prior versions were also available in black or gray only and came with a reverse clicky switch designed for more like 2 amp instead of 3. They also had a slightly longer body tube that could result in connection problems with the battery (particularly shorter unprotected batteries or with dropins that have short springs).


'''L2X''' - Similar to the L2 but with a knobby body and therefore lacks some of the finer details like the hex head. Introduced in September 2010. Also available in a 2x18650 extended version.
'''L2X''' - Similar to the L2 but with a knobby body and therefore lacks some of the finer details like the hex head. Introduced in September 2010. Also available in a 2x18650 extended version.
Line 15: Line 15:
'''L2m''' - A 1xCR123A version of the L2. An extension for a second CR123A is available (often included), but only the newer "2009" version is bored wide enough to accommodate an 18650.
'''L2m''' - A 1xCR123A version of the L2. An extension for a second CR123A is available (often included), but only the newer "2009" version is bored wide enough to accommodate an 18650.


'''L2-R''' - A 2xAA version of the L2. The L2-R tailcap is narrower than the L2's and tailstands.
'''L2T''' - A 1x18650 host. Similar to the L2, but with a black matte finish, knurling on the head, and comes with removable rubber grip rings. The default bezel is flat and it comes with a forward clicky. Does not tailstand. Introduced in June 2011. A special edition stainless steel version was introduced in December 2011.


'''L2i''' - A 3xAAA version of the L2 with the batteries inserted into a caddy and then into the tube. Has a wider tailcap that tailstands. Can be used with a 18650 if you make sure the battery fits in a collar near the head (may be easier to get the battery in the collar by loading it from the front instead of the tail). When using an 18650 it may also help if you don't tighten the head and tail all the way. One 18650 has about 3 times the capacity of 3xAAA's.
===Other lights===


'''L2T''' - A 1x18650 host. Similar to the L2, but with a black matte finish, knurling on the head, and comes with removable rubber grip rings. The default bezel is flat and it comes with a forward clicky. Does not tailstand. Introduced in June 2011.
'''Gladiator''' 4x18650 P60 host is a long stick with a knobby texture like the L2X. Comes with dummy cells so that you can use fewer batteries and maintain the form. Introduced in January 2012.
 
===Other lights===


'''Skyline''' 1x18650 or 2xCR123A 1-mode light with Cree XR-E R2 LED and a large head and very deep reflector for greater throw. By pressing and holding the power button, the user can select any brightness from max down to 5% output. Double-clicking the power button invokes strobe. 200 lumens with 18650, 260 lumens claimed with 2xCR123A. Max voltage is 6V, so 16340's are not recommended.
'''Skyline''' 1x18650 or 2xCR123A 1-mode light with Cree XR-E R2 LED and a large head and very deep reflector for greater throw. By pressing and holding the power button, the user can select any brightness from max down to 5% output. Double-clicking the power button invokes strobe. 200 lumens with 18650, 260 lumens claimed with 2xCR123A. Max voltage is 6V, so 16340's are not recommended.
Line 38: Line 36:


Solarforce makes a lot of different bezels, clips, and tailcaps for their lights. Here is a [http://budgetlightforum.com/node/5108 guide] to tailcaps and a slight older look [http://budgetlightforum.com/node/1450 here].
Solarforce makes a lot of different bezels, clips, and tailcaps for their lights. Here is a [http://budgetlightforum.com/node/5108 guide] to tailcaps and a slight older look [http://budgetlightforum.com/node/1450 here].
==Past Lights==
'''L2-R''' - A 2xAA version of the L2. The L2-R tailcap is narrower than the L2's and tailstands.
'''L2i''' - A 3xAAA version of the L2 with the batteries inserted into a caddy and then into the tube. Has a wider tailcap that tailstands. Can be used with a 18650 if you make sure the battery fits in a collar near the head (may be easier to get the battery in the collar by loading it from the front instead of the tail). When using an 18650 it may also help if you don't tighten the head and tail all the way. One 18650 has about 3 times the capacity of 3xAAA's.


==Popular Dealers==
==Popular Dealers==
Brted
confirmed, developer
1,668

edits

Retrieved from "https://flashlightwiki.com/Special:MobileDiff/1069"