Solarforce: Difference between revisions
Jump to navigation
Jump to search
add L2n and P1d
(add M3, X2, and X3) |
(add L2n and P1d) |
||
| Line 8: | Line 8: | ||
'''L2''' - The original light is a 1x18650 host. Available in matte black or shiny titanium gray. The 2011 edition has a 3 amp switch. The tail switch is exposed so this light does not tailstand. Prior to 2011, black was glossy, gunmetal gray had a greenish tint, and a matte sand color was available. Prior to 2009, the body tube was not wide enough for 188650 batteries. | '''L2''' - The original light is a 1x18650 host. Available in matte black or shiny titanium gray. The 2011 edition has a 3 amp switch. The tail switch is exposed so this light does not tailstand. Prior to 2011, black was glossy, gunmetal gray had a greenish tint, and a matte sand color was available. Prior to 2009, the body tube was not wide enough for 188650 batteries. | ||
'''L2n''' - Another P60 host, this one has a fluted tail piece and finger divots on the body. The head looks the same as the L2. Introduced in October 2012. | |||
'''L2P''' - Similar to the L2 but with a forward clicky, better [[Materials#Anodizing|anodizing]] (Type III HA instead of Type II), a less aggressive bezel, milder knurling, and the ability to tailstand. Available in black or gray with 2011 limited editions in gold or blue. Prior versions were also available in black or gray only and came with a reverse clicky switch designed for more like 2 amp instead of 3. They also had a slightly longer body tube that could result in connection problems with the battery (particularly shorter unprotected batteries or with dropins that have short springs). | '''L2P''' - Similar to the L2 but with a forward clicky, better [[Materials#Anodizing|anodizing]] (Type III HA instead of Type II), a less aggressive bezel, milder knurling, and the ability to tailstand. Available in black or gray with 2011 limited editions in gold or blue. Prior versions were also available in black or gray only and came with a reverse clicky switch designed for more like 2 amp instead of 3. They also had a slightly longer body tube that could result in connection problems with the battery (particularly shorter unprotected batteries or with dropins that have short springs). | ||
| Line 34: | Line 36: | ||
'''P1''' 1x18650 P60 host made of fiber-reinforced plastic with an aluminum skeleton. Available in black, yellow, brown, or green. Introduced in March 2012. | '''P1''' 1x18650 P60 host made of fiber-reinforced plastic with an aluminum skeleton. Available in black, yellow, brown, or green. Introduced in March 2012. | ||
'''P1d''' Based on the P1 but with all aluminum construction. Introduced in October 2012. | |||
'''X2''' 1xAA 2-mode twisty with a Cree XP-E R4 made of stainless steel with a knurled head. Modes are 100 or 20 lumens. Introduced in August 2012. | '''X2''' 1xAA 2-mode twisty with a Cree XP-E R4 made of stainless steel with a knurled head. Modes are 100 or 20 lumens. Introduced in August 2012. | ||