Mag Instrument: Difference between revisions
Jump to navigation
Jump to search
comment out cite web; may want it later
(→Thermal management: revert references to plain cite) |
(comment out cite web; may want it later) |
||
| Line 150: | Line 150: | ||
Certain Mag Instrument LED flashlights provide step-down regulation. This is probably what Mag Instrument is referring to by the term | Certain Mag Instrument LED flashlights provide step-down regulation. This is probably what Mag Instrument is referring to by the term | ||
<ref>Mag Instrument, Inc. [http://www.maglite.com/mlt_story.asp MAG-LED® Technology], retrieved 24 January 2013. "Intelligent Energy Source Management: The second-generation Mag® LED flashlight includes a sophisticated electronic LED module which continuously monitors the balance between high brightness and efficient power usage, allowing for prolonged battery life." | <ref>Mag Instrument, Inc. [http://www.maglite.com/mlt_story.asp MAG-LED® Technology], retrieved 24 January 2013. "Intelligent Energy Source Management: The second-generation Mag® LED flashlight includes a sophisticated electronic LED module which continuously monitors the balance between high brightness and efficient power usage, allowing for prolonged battery life." | ||
<!-- | |||
{{cite web | {{cite web | ||
|title=MAG-LED® Technology | |title=MAG-LED® Technology | ||
| Line 157: | Line 158: | ||
|author= | |author= | ||
|date= | |date= | ||
|quote=Intelligent Energy Source Management: The second-generation Mag® LED flashlight includes a sophisticated electronic LED module which continuously monitors the balance between high brightness and efficient power usage, allowing for prolonged battery life.}} | |quote=Intelligent Energy Source Management: The second-generation Mag® LED flashlight includes a sophisticated electronic LED module which continuously monitors the balance between high brightness and efficient power usage, allowing for prolonged battery life.}}--> | ||
</ref> | </ref> | ||
"Intelligent Energy Source Management". During use, the flashlights dim slowly and gradually. This feature (which is enabled whether or not your batteries are disposable) prevents the flashlights from using up disposable batteries so quickly. | "Intelligent Energy Source Management". During use, the flashlights dim slowly and gradually. This feature (which is enabled whether or not your batteries are disposable) prevents the flashlights from using up disposable batteries so quickly. | ||
<ref>Chicken Drumstick (27 August 2012) [http://budgetlightforum.com/node/8080#comment-220524 Re: Review: Mini Maglite Pro+]. ''BudgetLightForum LED flashlight forum''. Retrieved 24 January 2013. "It’s regulated to offer the max performance and run time off of alkaline cells. The downside is you’ll see little improvement using lithium primaries or Eneloops. But this is all down to the target market and expected customers I guess." | <ref>Chicken Drumstick (27 August 2012) [http://budgetlightforum.com/node/8080#comment-220524 Re: Review: Mini Maglite Pro+]. ''BudgetLightForum LED flashlight forum''. Retrieved 24 January 2013. "It’s regulated to offer the max performance and run time off of alkaline cells. The downside is you’ll see little improvement using lithium primaries or Eneloops. But this is all down to the target market and expected customers I guess." | ||
<!-- | |||
{{cite web | {{cite web | ||
|title=Re: Review: Mini Maglite Pro+ | |title=Re: Review: Mini Maglite Pro+ | ||
| Line 170: | Line 172: | ||
|date=27 August 2012 | |date=27 August 2012 | ||
|quote=It’s regulated to offer the max performance and run time off of alkaline cells. The downside is you’ll see little improvement using lithium primaries or Eneloops. But this is all down to the target market and expected customers I guess.}} | |quote=It’s regulated to offer the max performance and run time off of alkaline cells. The downside is you’ll see little improvement using lithium primaries or Eneloops. But this is all down to the target market and expected customers I guess.}} | ||
--> | |||
</ref> | </ref> | ||
Among those Mag Instrument flashlights with step-down regulation, the regulation works differently on some than on others. Take, for example, the regulation on the Mini Maglite Pro LED 2-Cell AA and Pro+ LED 2-Cell AA. After a few hours of operation, these flashlights fall to about 10% of full brightness; they do not return to full brightness unless the power is cycled. | Among those Mag Instrument flashlights with step-down regulation, the regulation works differently on some than on others. Take, for example, the regulation on the Mini Maglite Pro LED 2-Cell AA and Pro+ LED 2-Cell AA. After a few hours of operation, these flashlights fall to about 10% of full brightness; they do not return to full brightness unless the power is cycled. | ||
<ref>Wang, Robin (28 February 2012) [http://www.led-resource.com/2012/02/mini-maglite-pro-and-proplus-led-flashlight-review/ Mini Maglite Pro and Pro+ LED Flashlight Review] LED-Resource. Retrieved 27 January 2013. "As efficient as LEDs are, heat is still produced and has to be dissipated, so step-down regulation is used to prolong battery life and reduce heat." | <ref>Wang, Robin (28 February 2012) [http://www.led-resource.com/2012/02/mini-maglite-pro-and-proplus-led-flashlight-review/ Mini Maglite Pro and Pro+ LED Flashlight Review] LED-Resource. Retrieved 27 January 2013. "As efficient as LEDs are, heat is still produced and has to be dissipated, so step-down regulation is used to prolong battery life and reduce heat." | ||
<!-- | |||
{{cite web | {{cite web | ||
|title=Mini Maglite Pro and Pro+ LED Flashlight Review | |title=Mini Maglite Pro and Pro+ LED Flashlight Review | ||
| Line 181: | Line 185: | ||
|date=28 February 2012 | |date=28 February 2012 | ||
|author=Wang, Robin | |author=Wang, Robin | ||
|quote=As efficient as LEDs are, heat is still produced and has to be dissipated, so step-down regulation is used to prolong battery life and reduce heat.}} | |quote=As efficient as LEDs are, heat is still produced and has to be dissipated, so step-down regulation is used to prolong battery life and reduce heat.}}--> | ||
</ref> | </ref> | ||
This regulation was designed to try to prolong the life of alkaline batteries. (Some say it was also designed to boost [[ANSI-NEMA FL-1#Runtime|ANSI/NEMA FL-1 runtime]] ratings, which measure the time the flashlight runs before falling to 10% brightness.) | This regulation was designed to try to prolong the life of alkaline batteries. (Some say it was also designed to boost [[ANSI-NEMA FL-1#Runtime|ANSI/NEMA FL-1 runtime]] ratings, which measure the time the flashlight runs before falling to 10% brightness.) | ||
<ref>[[User:Brted|Brted]] (28 January 2013) [http://flashlightwiki.com/Talk:Mag_Instrument#Thermal-management_article_section Talk:Mag Instrument] ''Flashlight Wiki''. Retrieved 29 January 2013. "The effect of this would be to keep the light running cooler, but also to extend battery life (and some say to distort the FL-1 runtime rating which gives you credit down to 10% brightness)." | <ref>[[User:Brted|Brted]] (28 January 2013) [http://flashlightwiki.com/Talk:Mag_Instrument#Thermal-management_article_section Talk:Mag Instrument] ''Flashlight Wiki''. Retrieved 29 January 2013. "The effect of this would be to keep the light running cooler, but also to extend battery life (and some say to distort the FL-1 runtime rating which gives you credit down to 10% brightness)." | ||
<!-- | |||
{{cite web | {{cite web | ||
|title=Talk:Mag Instrument | |title=Talk:Mag Instrument | ||
| Line 192: | Line 197: | ||
|date=28 January 2013 | |date=28 January 2013 | ||
|author=[[User:Brted|Brted]] | |author=[[User:Brted|Brted]] | ||
|quote=The effect of this would be to keep the light running cooler, but also to extend battery life (and some say to distort the FL-1 runtime rating which gives you credit down to 10% brightness).}} | |quote=The effect of this would be to keep the light running cooler, but also to extend battery life (and some say to distort the FL-1 runtime rating which gives you credit down to 10% brightness).}}--> | ||
</ref> If you're using lithium primaries, the regulation steps down earlier than is necessary. When the flashlights reach 10% brightness, the batteries might still be more than half full. | </ref> If you're using lithium primaries, the regulation steps down earlier than is necessary. When the flashlights reach 10% brightness, the batteries might still be more than half full. | ||
For many customers, Mag flashlights with step-down regulation are fine choices. EDC forums user "watchcollector1968" writes, "If you are outside in the dark walking or working and have the light on chances of your eyes even detecting the drop over an hour or so is pretty slim. If for whatever reason you think you need full power again, simply turn it off and back on and the cycle starts over again." | For many customers, Mag flashlights with step-down regulation are fine choices. EDC forums user "watchcollector1968" writes, "If you are outside in the dark walking or working and have the light on chances of your eyes even detecting the drop over an hour or so is pretty slim. If for whatever reason you think you need full power again, simply turn it off and back on and the cycle starts over again." | ||
<ref>watchcollector1968 (2 June 2012) [http://edcforums.com/threads/maglite-ml100-2c.96043/ Maglite ML100 2C]. ''EDC Forums flashlight forum''. Retrieved 27 January 2013. "On high it will start at its full output for something like 12 or 13 minutes, then it begins to step down. Opinions seem to vary as to why, some think it is to prevent excessive heat buildup, others think it is to preserve battery life. Either way, if you are outside in the dark walking or working and have the light on chances of your eyes even detecting the drop over an hour or so is pretty slim. If for whatever reason you think you need full power again, simply turn it off and back on and the cycle starts over again." | <ref>watchcollector1968 (2 June 2012) [http://edcforums.com/threads/maglite-ml100-2c.96043/ Maglite ML100 2C]. ''EDC Forums flashlight forum''. Retrieved 27 January 2013. "On high it will start at its full output for something like 12 or 13 minutes, then it begins to step down. Opinions seem to vary as to why, some think it is to prevent excessive heat buildup, others think it is to preserve battery life. Either way, if you are outside in the dark walking or working and have the light on chances of your eyes even detecting the drop over an hour or so is pretty slim. If for whatever reason you think you need full power again, simply turn it off and back on and the cycle starts over again." | ||
<!-- | |||
{{cite web | {{cite web | ||
|title=Maglite ML100 2C | |title=Maglite ML100 2C | ||
| Line 205: | Line 211: | ||
|author=watchcollector1968 | |author=watchcollector1968 | ||
|date=2 June 2012 | |date=2 June 2012 | ||
|quote=On high it will start at its full output for something like 12 or 13 minutes, then it begins to step down. Opinions seem to vary as to why, some think it is to prevent excessive heat buildup, others think it is to preserve battery life. Either way, if you are outside in the dark walking or working and have the light on chances of your eyes even detecting the drop over an hour or so is pretty slim. If for whatever reason you think you need full power again, simply turn it off and back on and the cycle starts over again.}}</ref> | |quote=On high it will start at its full output for something like 12 or 13 minutes, then it begins to step down. Opinions seem to vary as to why, some think it is to prevent excessive heat buildup, others think it is to preserve battery life. Either way, if you are outside in the dark walking or working and have the light on chances of your eyes even detecting the drop over an hour or so is pretty slim. If for whatever reason you think you need full power again, simply turn it off and back on and the cycle starts over again.}}--></ref> | ||
But step-down regulation can be bad if you need to be seen: for example, if you are using your flashlight as a bike headlamp. | But step-down regulation can be bad if you need to be seen: for example, if you are using your flashlight as a bike headlamp. | ||
| Line 214: | Line 220: | ||
The Maglite LED 2-CELL AA,<ref name="2AA">NLee the Engineer (15 September 2010) [http://www.amazon.com/review/R2LJT6DHWDCB6F Contains outdated 1st-gen Maglite LED flashlights] ''Customer Reviews: Maglite 3D / 2AA LED Flashlight 2 Piece''. Amazon.com, Inc. Retrieved 23 January 2013. "The 2nd-gen models solved the thermal problem. Previous models over-heat easily, and their light dim down after just a few minute of operation." | The Maglite LED 2-CELL AA,<ref name="2AA">NLee the Engineer (15 September 2010) [http://www.amazon.com/review/R2LJT6DHWDCB6F Contains outdated 1st-gen Maglite LED flashlights] ''Customer Reviews: Maglite 3D / 2AA LED Flashlight 2 Piece''. Amazon.com, Inc. Retrieved 23 January 2013. "The 2nd-gen models solved the thermal problem. Previous models over-heat easily, and their light dim down after just a few minute of operation." | ||
<!-- | |||
{{cite web | {{cite web | ||
|title=Contains outdated 1st-gen Maglite LED flashlights | |title=Contains outdated 1st-gen Maglite LED flashlights | ||
| Line 222: | Line 229: | ||
|author=NLee the Engineer | |author=NLee the Engineer | ||
|date=15 September 2010 | |date=15 September 2010 | ||
|quote=The 2nd-gen models solved the thermal problem. Previous models over-heat easily, and their light dim down after just a few minute of operation.}} | |quote=The 2nd-gen models solved the thermal problem. Previous models over-heat easily, and their light dim down after just a few minute of operation.}}--> | ||
</ref> and some other Maglite LED flashlights, used two techniques to avoid overheating: | </ref> and some other Maglite LED flashlights, used two techniques to avoid overheating: | ||
* To cool off the LED, each of these flashlights included imperfect heat-dissipation technology:<ref>Wang, Robin (20 January 2012). [http://www.led-resource.com/2012/01/maglite-ml100-led-flashlight-review/ Maglite ML100 LED Flashlight Review]. LED-Resource. Retrieved 24 January 2013. "Previous generations of Maglite’s MAG-LED technology, including the original LED drop-in replacements and even the current LED D-cell lights, had problems with heat dissipation and irregular beam patterns because they were originally designed for incandescent bulbs." | * To cool off the LED, each of these flashlights included imperfect heat-dissipation technology:<ref>Wang, Robin (20 January 2012). [http://www.led-resource.com/2012/01/maglite-ml100-led-flashlight-review/ Maglite ML100 LED Flashlight Review]. LED-Resource. Retrieved 24 January 2013. "Previous generations of Maglite’s MAG-LED technology, including the original LED drop-in replacements and even the current LED D-cell lights, had problems with heat dissipation and irregular beam patterns because they were originally designed for incandescent bulbs." | ||
<!-- | |||
{{cite web | {{cite web | ||
|title=Maglite ML100 LED Flashlight Review | |title=Maglite ML100 LED Flashlight Review | ||
| Line 233: | Line 241: | ||
|author=Wang, Robin | |author=Wang, Robin | ||
|date=20 January 2012 | |date=20 January 2012 | ||
|quote=Previous generations of Maglite’s MAG-LED technology, including the original LED drop-in replacements and even the current LED D-cell lights, had problems with heat dissipation and irregular beam patterns because they were originally designed for incandescent bulbs.}} | |quote=Previous generations of Maglite’s MAG-LED technology, including the original LED drop-in replacements and even the current LED D-cell lights, had problems with heat dissipation and irregular beam patterns because they were originally designed for incandescent bulbs.}}--> | ||
</ref> a poorly-designed [http://en.wikipedia.org/wiki/Thermal_management_of_electronic_devices_and_systems#Heat_sinks heat sink,]<ref name="2C_upgrade"> NewBie (16 July 2006). [http://www.candlepowerforums.com/vb/showthread.php?119665-MagLite-2C-2D-4D-3W-LED-drop-in-Technical-Review MagLite 2C LED drop-in Technical Review]. ''CandlePowerForums LED flashlight forum''. Post 1. Retrieved 23 January 2013. "We are looking at nearly a 60% drop in output, due to the LED getting hot, from a severe lack of good heatsinking." | </ref> a poorly-designed [http://en.wikipedia.org/wiki/Thermal_management_of_electronic_devices_and_systems#Heat_sinks heat sink,]<ref name="2C_upgrade"> NewBie (16 July 2006). [http://www.candlepowerforums.com/vb/showthread.php?119665-MagLite-2C-2D-4D-3W-LED-drop-in-Technical-Review MagLite 2C LED drop-in Technical Review]. ''CandlePowerForums LED flashlight forum''. Post 1. Retrieved 23 January 2013. "We are looking at nearly a 60% drop in output, due to the LED getting hot, from a severe lack of good heatsinking." | ||
<!-- | |||
{{cite web | {{cite web | ||
|title=MagLite 2C LED drop-in Technical Review | |title=MagLite 2C LED drop-in Technical Review | ||
| Line 242: | Line 251: | ||
|author="NewBie" | |author="NewBie" | ||
|date=16 July 2006|at=Post 1 | |date=16 July 2006|at=Post 1 | ||
|quote=We are looking at nearly a 60% drop in output, due to the LED getting hot, from a severe lack of good heatsinking}}.</ref> made of thin [http://en.wikipedia.org/wiki/Stamping_(metalworking) stamped] metal.<ref>NewBie (16 July 2006). [http://www.candlepowerforums.com/vb/showthread.php?119665-MagLite-2C-2D-4D-3W-LED-drop-in-Technical-Review MagLite 2C LED drop-in Technical Review]. ''CandlePowerForums LED flashlight forum''. Post 1. Retrieved 23 January 2013. "Here we go, one of those for your eyes only, which reveals the secrets and the shortcomings, and explains a great many things [...]" | |quote=We are looking at nearly a 60% drop in output, due to the LED getting hot, from a severe lack of good heatsinking}}-->.</ref> made of thin [http://en.wikipedia.org/wiki/Stamping_(metalworking) stamped] metal.<ref>NewBie (16 July 2006). [http://www.candlepowerforums.com/vb/showthread.php?119665-MagLite-2C-2D-4D-3W-LED-drop-in-Technical-Review MagLite 2C LED drop-in Technical Review]. ''CandlePowerForums LED flashlight forum''. Post 1. Retrieved 23 January 2013. "Here we go, one of those for your eyes only, which reveals the secrets and the shortcomings, and explains a great many things [...]" | ||
<!-- | |||
{{cite web | {{cite web | ||
|title=MagLite 2C LED drop-in Technical Review | |title=MagLite 2C LED drop-in Technical Review | ||
| Line 252: | Line 262: | ||
|date=16 July 2006 | |date=16 July 2006 | ||
|at=Post 1 | |at=Post 1 | ||
|quote=Here we go, one of those for your eyes only, which reveals the secrets and the shortcomings, and explains a great many things [...]}}.</ref> | |quote=Here we go, one of those for your eyes only, which reveals the secrets and the shortcomings, and explains a great many things [...]}}-->.</ref> | ||
* Also, as each flashlight's LED heated up, the flashlight provided less power to the LED, which caused it to dim and to produce less heat. If the flashlight was moved into a cooler environment, it instantly brightened again.<ref> NewBie (16 July 2006). [http://www.candlepowerforums.com/vb/showthread.php?119665-MagLite-2C-2D-4D-3W-LED-drop-in-Technical-Review MagLite 2C LED drop-in Technical Review]. ''CandlePowerForums LED flashlight forum''. Post 1. Retrieved 23 January 2013. "When the module is hot, soaking them with a lot of cold spray causes the light output to jump back to when you first turned it on, and the current goes right back up at the same time." | * Also, as each flashlight's LED heated up, the flashlight provided less power to the LED, which caused it to dim and to produce less heat. If the flashlight was moved into a cooler environment, it instantly brightened again.<ref> NewBie (16 July 2006). [http://www.candlepowerforums.com/vb/showthread.php?119665-MagLite-2C-2D-4D-3W-LED-drop-in-Technical-Review MagLite 2C LED drop-in Technical Review]. ''CandlePowerForums LED flashlight forum''. Post 1. Retrieved 23 January 2013. "When the module is hot, soaking them with a lot of cold spray causes the light output to jump back to when you first turned it on, and the current goes right back up at the same time." | ||
<!-- | |||
{{cite web | {{cite web | ||
|title=MagLite 2C LED drop-in Technical Review | |title=MagLite 2C LED drop-in Technical Review | ||
| Line 261: | Line 272: | ||
|date=16 July 2006 | |date=16 July 2006 | ||
|at=Post 1 | |at=Post 1 | ||
|quote=When the module is hot, soaking them with a lot of cold spray causes the light output to jump back to when you first turned it on, and the current goes right back up at the same time.}} | |quote=When the module is hot, soaking them with a lot of cold spray causes the light output to jump back to when you first turned it on, and the current goes right back up at the same time.}}--> | ||
</ref> | </ref> | ||
Some criticized these flashlights for dimming so much so much due to the poor heat sink.<ref name="2C_upgrade" /><ref>[http://flashlightreviews.com/reviews/maglite_mag-led.htm Maglite Mag-LED: 2, 3, and 4 cell modules] FlashlightReviews Archive. Retrieved 23 January 2013. "Some very knowledgeable folks [...] discovered poor heatsinking for the LED, which the circuitry then has to compensate for by quickly lowering output as the module heats up. [...] What I didn't like: Module heats up quickly and output drops quickly." | Some criticized these flashlights for dimming so much so much due to the poor heat sink.<ref name="2C_upgrade" /><ref>[http://flashlightreviews.com/reviews/maglite_mag-led.htm Maglite Mag-LED: 2, 3, and 4 cell modules] FlashlightReviews Archive. Retrieved 23 January 2013. "Some very knowledgeable folks [...] discovered poor heatsinking for the LED, which the circuitry then has to compensate for by quickly lowering output as the module heats up. [...] What I didn't like: Module heats up quickly and output drops quickly." | ||
<!-- | |||
{{cite web | {{cite web | ||
|title=Maglite Mag-LED: 2, 3, and 4 cell modules | |title=Maglite Mag-LED: 2, 3, and 4 cell modules | ||
| Line 274: | Line 286: | ||
|author= | |author= | ||
|date=July 2006 | |date=July 2006 | ||
|quote=Some very knowledgeable folks [...] discovered poor heatsinking for the LED, which the circuitry then has to compensate for by quickly lowering output as the module heats up. [...] What I didn't like: Module heats up quickly and output drops quickly.}} | |quote=Some very knowledgeable folks [...] discovered poor heatsinking for the LED, which the circuitry then has to compensate for by quickly lowering output as the module heats up. [...] What I didn't like: Module heats up quickly and output drops quickly.}}--> | ||
</ref> There existed costlier flashlights with better thermal management. | </ref> There existed costlier flashlights with better thermal management. | ||
In 2009, Mag Instrument modified the Maglite LED 2-CELL AA and Maglite LED 3-CELL D to each include a better heat sink. Even during extended use, those flashlights now stay at a reasonable temperature without dimming themselves.<ref name="2AA" /><ref>NLee the Engineer (11 September 2010) [http://www.amazon.com/review/R19LDXP4LJKG36 =Maglite second-gen LED flashlight deserves a second chance] ''Customer Reviews: Maglite SD3D016 3-D Cell LED Flashlight''. Amazon.com, Inc. Retrieved 23 January 2013. "Improved Heat Sink: The overheating problem found in 1st-gen LED modules has been solved. That is, the light no longer dims down after just a few minutes of operation. [...] Better Power Management: The new Maglite maintains constant power consumption of 2W as long as battery voltage is above 3.5V." | In 2009, Mag Instrument modified the Maglite LED 2-CELL AA and Maglite LED 3-CELL D to each include a better heat sink. Even during extended use, those flashlights now stay at a reasonable temperature without dimming themselves.<ref name="2AA" /><ref>NLee the Engineer (11 September 2010) [http://www.amazon.com/review/R19LDXP4LJKG36 =Maglite second-gen LED flashlight deserves a second chance] ''Customer Reviews: Maglite SD3D016 3-D Cell LED Flashlight''. Amazon.com, Inc. Retrieved 23 January 2013. "Improved Heat Sink: The overheating problem found in 1st-gen LED modules has been solved. That is, the light no longer dims down after just a few minutes of operation. [...] Better Power Management: The new Maglite maintains constant power consumption of 2W as long as battery voltage is above 3.5V." | ||
<!-- | |||
{{cite web | {{cite web | ||
|title=Maglite second-gen LED flashlight deserves a second chance | |title=Maglite second-gen LED flashlight deserves a second chance | ||
| Line 286: | Line 299: | ||
|author=NLee the Engineer | |author=NLee the Engineer | ||
|date=11 September 2010 | |date=11 September 2010 | ||
|quote=Improved Heat Sink: The overheating problem found in 1st-gen LED modules has been solved. That is, the light no longer dims down after just a few minutes of operation. [...] Better Power Management: The new Maglite maintains constant power consumption of 2W as long as battery voltage is above 3.5V.}} | |quote=Improved Heat Sink: The overheating problem found in 1st-gen LED modules has been solved. That is, the light no longer dims down after just a few minutes of operation. [...] Better Power Management: The new Maglite maintains constant power consumption of 2W as long as battery voltage is above 3.5V.}}--> | ||
</ref><!-- I'm not sure whether or not other Mag Instrument's other LED flashlights must dim themselves over time to stay cool. See talk. --[[User:Unforgettableid]], January 2013 --> | </ref><!-- I'm not sure whether or not other Mag Instrument's other LED flashlights must dim themselves over time to stay cool. See talk. --[[User:Unforgettableid]], January 2013 --> | ||