Uploads by Brted
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 20:03, 27 November 2010 | Akorayk106.jpg (file) |  |
81 KB | 2 | |
| 00:15, 28 November 2010 | Osram-led.jpg (file) |  |
60 KB | Osram LED from a UniqueFire AA-S1 flashlight | 1 |
| 19:54, 28 November 2010 | P60dropin-and-strips.jpg (file) |  |
64 KB | A P60 drop-in and UltraFire WF 502B host with aluminum strips cut from a soda can to provide better heatsinking for the drop-in. | 1 |
| 20:12, 28 November 2010 | Quark-123-2.jpg (file) |  |
81 KB | Quark 123-2 Tactical flashlight by 4Sevens | 1 |
| 20:54, 28 November 2010 | Sscp7led.jpg (file) |  |
47 KB | Seoul Semiconductor P7 LED | 1 |
| 21:02, 28 November 2010 | Creexpgr5.jpg (file) |  |
32 KB | Cree XP-G R5 LED | 1 |
| 21:30, 28 November 2010 | Solarforcel2.jpg (file) |  |
69 KB | Solarforce L2 in gunmetal gray | 1 |
| 21:36, 28 November 2010 | Itpa3eos.jpg (file) |  |
76 KB | iTP A3 EOS in gray, titanium, and black, with lobster claw keychain | 1 |
| 22:00, 28 November 2010 | Ultrafires.jpg (file) |  |
55 KB | From the top: UltraFire models MCU WF-1200L, WF-504B, WF-502B, and WF-501B | 1 |
| 09:59, 4 December 2010 | Cree mc-e.jpg (file) |  |
42 KB | Cree MC-E LED with 4 LED dies (or "dice") | 1 |
| 10:01, 4 December 2010 | Battery-sizes.jpg (file) |  |
88 KB | Comparison of battery sizes. From the left: AAA, AA, 18650, and 2 CR123A's. | 1 |
| 11:33, 4 December 2010 | Duraloop.jpg (file) |  |
37 KB | Comparison of white-top Duracell Precharged cell and Eneloop. | 1 |
| 11:34, 4 December 2010 | Materials.jpg (file) |  |
28 KB | Flashlights of 3 materials (from left): HA III aluminum, titanium, stainless steel | 1 |
| 11:47, 4 December 2010 | Nanjg-112A-driver.jpg (file) |  |
55 KB | The 17mm NANJG 112A boost driver | 1 |
| 11:50, 4 December 2010 | Nanjg-106-driver.jpg (file) |  |
83 KB | The NANJG 106 driver with 4 7135 linear regulators (4 more are on the bottom). | 1 |
| 13:30, 4 December 2010 | Maha-c9000.jpg (file) |  |
41 KB | The Powerex Maha-C9000 AA/AAA battery charger and conditioner | 1 |
| 23:57, 4 December 2010 | Luminus SST-90.jpg (file) |  |
50 KB | Luminus SST-90 LED from a Varapower prototype. Photo courtesy of Don. | 1 |
| 16:47, 5 December 2010 | Cree xp-e.jpg (file) |  |
27 KB | Cree XP-E LED (from a Trustfire XP-E F23) | 1 |
| 16:50, 5 December 2010 | Cree xp-g.jpg (file) |  |
32 KB | Cree XP-G R5 LED (from Ultrafire WF-502B) | 1 |
| 11:25, 11 December 2010 | Solarforcex2.jpg (file) |  |
155 KB | Solarforce L2 (gunmetal gray) and L2i (sand). | 1 |
| 12:26, 17 December 2010 | Nanjg101ak.jpg (file) |  |
53 KB | The NANJG 101-AK driver | 1 |
| 11:01, 24 December 2010 | Incan.jpg (file) |  |
22 KB | Incandescent bulbs: a PR flange bulb from a Black and Decker Snakelight (3.2V) and a bi-pin bulb from a Mini Maglite. | 1 |
| 19:26, 30 December 2010 | Ansiwhite.png (file) |  |
10 KB | Add CCT values | 2 |
| 20:07, 30 December 2010 | Luminus.jpg (file) |  |
384 KB | Luminus tint binning nomenclature, based on ANSI white | 1 |
| 14:23, 31 December 2010 | Ssctints.jpg (file) |  |
89 KB | Previous version was not for P4 and P7 LED's. This one is. | 2 |
| 23:38, 1 January 2011 | Eqn-throw.png (file) |  |
5 KB | Equations for converting throw to candela based on ANSI/NEMA FL-1 standard of 0.25 lux | 1 |
| 14:35, 12 January 2011 | Magleds.jpg (file) |  |
60 KB | Maglite LED's for 3xD cell lights: on left the newer Cree XP-E with the Rebel on the right. Some Maglites started using the XP-E in late 2010. Photo by Peter Cheuk, used with permission. | 1 |
| 09:19, 18 January 2011 | Luxeon rebel.jpg (file) |  |
185 KB | Luxeon Rebel LED in a Maglite. Photo by Peter Cheuk, used with permission. | 1 |
| 09:21, 18 January 2011 | Sscp4.jpg (file) |  |
90 KB | Seoul Semiconductor P4 LED, U bin. Photo by Peter Cheuk, used with permission. | 1 |
| 15:12, 23 January 2011 | Maglites.jpg (file) |  |
148 KB | Mini Maglites 2xAA and 2xAAA in pewter | 1 |
| 22:39, 26 February 2011 | Sony-bcg34hld.jpg (file) |  |
32 KB | Sony BCG-34HLD charger with Sony Cycle Energy 1000mA LSD battery | 1 |
| 21:56, 6 March 2011 | Tir-optic.jpg (file) |  |
66 KB | Total internal reflection optic. This lens is made of plastic and came with the Mr.Lite BLF-Y4E, which has a Cree XR-E Q5 LED. | 1 |
| 17:03, 8 April 2011 | Ak47pins.jpg (file) |  |
128 KB | Picture of NANJG AK-47 driver with ATMEL ATTiny13 pin numbers labelled. | 1 |
| 08:37, 9 April 2011 | Avrisp.jpg (file) |  |
95 KB | An SOIC 8 clip attached to an Atmel Tiny13A chip on a flashlight driver board. This is the NANJG AK-47 driver. | 1 |
| 08:40, 9 April 2011 | Soic8clip.jpg (file) |  |
74 KB | An SOIC 8 clip with ribbon cable attached. The individual wires of the ribbon must be re-ordered to attach to the correct pins of the Atmel chip the clip will attach to. The 8-wire ribbon has a 10-wire plug that attaches to the USB ISP programmer. | 1 |
| 08:48, 9 April 2011 | Usbisp.jpg (file) |  |
52 KB | USB ISP AVR programming board. This attaches to the computer and the ribbon from the clip attaches to this board. | 1 |
| 09:03, 9 April 2011 | Ribbon.jpg (file) |  |
66 KB | The 8-wire ribbon from the clip must be modified to connect to Pin 9 of the USB ISP programmer. Open up the end of the ribbon and move wire 8 over to the 9th position then reassemble. | 1 |
| 21:28, 17 April 2011 | Turnigy.jpg (file) |  |
104 KB | Turnigy Accucell 6 hobby charger | 1 |
| 21:25, 14 May 2011 | P60-parts.jpg (file) |  |
51 KB | Parts to build a P60 drop-in. The only things not shown here are an isolation disk and the lead wires from the driver to the LED. | 1 |
| 21:40, 14 May 2011 | P60-ledmounted.jpg (file) |  |
58 KB | The LED is glued to the top of the brass pill with thermal adhesive. The key is to get the LED centered and not to cover the holes where the leads from the driver will come up to attach to the LED later. | 1 |
| 21:45, 14 May 2011 | P60-center.jpg (file) |  |
44 KB | Once the LED is in place, you can check whether it is centered by screwing the reflector over it. Before the adhesive sets up, you make adjustments to get the LED perfectly centered. | 1 |
| 22:14, 14 May 2011 | P60-leads.jpg (file) |  |
67 KB | Red and black leads are soldered to the driver board. It helps to hold the work in a vise (this is a PanaVise). A magnifying lens helps too (this is called a third hand). | 1 |
| 09:09, 15 May 2011 | P60-positive.jpg (file) |  |
47 KB | The bottom of the driver board with the small spring for contact with the positive end of the battery and solder bridges from the driver board to the pill. | 1 |
| 09:19, 15 May 2011 | P60-ledwired.jpg (file) |  |
71 KB | The LED with leads from the driver soldered in place. Make sure the solder points don't stick up too high or they could interfere with the reflector. | 1 |
| 09:28, 15 May 2011 | P60-driverdry.jpg (file) |  |
69 KB | square picture | 2 |
| 14:28, 15 May 2011 | P60-disk.jpg (file) |  |
55 KB | Isolation disk placed over the top of the driver. This prevents the aluminum reflector causing a short between the positive and negative parts of the LED. This is a 18mm disk, but it is better to get a 16mm disk which fits inside the outer rim of the pill | 1 |
| 20:24, 30 November 2011 | Ledtints.jpg (file) |  |
271 KB | From left to right (white balance set to 5,200K): Quark MiNi AA (cool white XP-G R5), Olight T20-M (XR-E Q5), Quark 123² Turbo (XP-G S2), 4Sevens Preon 2 (neutral XP-G R4), Quark RGB (neutral white MC-E), SureFire 6P (incandescent), 4Sevens Preon 2 ( | 1 |
| 17:22, 11 February 2012 | Mobile-home.png (file) |  |
122 KB | Screenshot of the mobile version of the Flashlight Wiki home page, taken on an iPod Touch 4G. | 1 |
| 17:23, 11 February 2012 | Mobile-menu.png (file) |  |
114 KB | Screenshot of the mobile version of the Flashlight Wiki showing the drop down menu. Taken on a iPod Touch 4G. | 1 |
| 09:28, 18 February 2012 | Baked-anodized-lights.jpg (file) |  |
222 KB | Three lights that were originally black, after being broiled in an oven at 500 degrees F for 30 minutes. The resulting color varies from one manufacturer to another, with the biggest tint shifts available from Type II anodizing, which is more common on bu | 1 |
