Olight: Difference between revisions

From Flashlight Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(25 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Olight Technology Co., Ltd., is based in Guangdong, China. They produce higher end lights and also own [[iTP]].
Olight Technology Co., Ltd., is based in Guangdong, China. They produce higher end lights and also owned [[iTP]]. Their board chairman is the owner of [[Foursevens]] with whom they have a "strategic alliance." Website: [http://www.olightworld.com www.olightworld.com].


==Lights==
==Lights==


'''M20 Warrior''' 1-mode 2xCR123A or 18650 forward clicky with [[Cree]] XP-G R5 LED. The light can be set to any of 3 brightness levels (9, 110, or 320 lumens) or strobe by loosening then tightening the bezel. Earlier versions had a Cree XR-E R2 LED with 7, 90, and 250 lumen output. Review: [http://www.candlepowerforums.com/vb/showthread.php?209384 selfbuilt (R2)] [http://www.light-reviews.com/olight_m20/ Light Reviews (R2)]
'''i1 EOS''' - 1xCR123A 3-mode twisty with a [[Cree]] XM-L LED. Output is 4, 40, or 180 ANSI lumens (68m throw). Introduced in August 2011 as a replacement of the [[iTP]] A1 EOS.  


'''M20 S Warrior''' 4-mode 2xCR123A or 18650 forward clicky Cree XP-G R5 LED. The light can be set to any of 3 brightness levels (5, 110, or 320 lumens) or strobe by using the side switch near the tail. A version with a XP-G S2 LED has output levels of 5, 115, or 340 lumens. [http://www.olightworld.com/product_show.asp?id=190 Web page]
'''i2 EOS''' - 1xAA 3-mode twisty with a Cree XP-G R5. Output is 2.5, 20, or 75 ANSI lumens (50m throw). Introduced in August 2011 as a replacement of the iTP A2 EOS.  


'''M21 Warrior''' 1-mode 2xCR123A or 18650 forward clicky with [[Luminus]] SST-50 LED. The light can be set to any of 3 brightness levels (20, 80, or 500 lumens) or strobe by loosening and then tightening the head again. [http://www.olightworld.com/product_show.asp?id=173 Web page] Review: [http://www.candlepowerforums.com/vb/showthread.php?256530 selfbuilt]
'''i3 EOS''' - 1xAAA 3-mode twisty with Cree XP-G R5 LED. Output is 2.5, 20, or 70 ANSI lumens (37m throw). Introduced in August 2011 as a replacement of the iTP A3 EOS. The clip at the tail is screwed in, but can be removed.


'''M30 Triton''' 4-mode 3xCR123A forward clicky with Cree MC-E LED. Side switch on tail switches modes or engages strobe if light is Off. Body tube extension can be added for 4xCR123A or 2x18650 operation. Brightness levels are 8, 120, and 700 lumens plus strobe. [http://www.olightworld.com/product_show.asp?id=153 Web page] Review: [http://www.light-reviews.com/olight_m30/ Light Reviews]
'''i3s EOS''' - 1xAAA 4-mode twisty with Cree XP-G2 R5 LED. Output is 0.5, 20, or 80 ANSI lumens (38m throw). A hidden strobe mode is available after cycling through the 3 regular modes twice. Mode order is Medium, High, Low. The clip snaps on like the old iTP A3 EOS, and is reversible. Introduced in December 2012.


'''M31 Triton''' 1-mode 3xCR123A forward clicky with Luminus SST-50 LED. Output level or strobe can be set by loosening and tightening bezel. The M31 has a larger head (68mm) than the M30 (44mm). Body tube extension can be added for 4xCR123A or 2x18650 operation. Brightness levels are 60, 320, and 800 lumens plus strobe. [http://www.olightworld.com/product_show.asp?id=177 Web page] Review: [http://www.candlepowerforums.com/vb/showthread.php?292989 HKJ]
'''i6 Paladin''' - 1x18650/17670 or 2xCR123A 2-mode light with Cree XM-L LED. Output is 80 or 420 ANSI lumens (200m throw). Introduced in August 2011 as a replacement of the iTP C6.  


'''M3X Triton''' 2-mode 3xCR123A (4xCR123A/2x18650 with extension) forward clicky with Cree XM-L LED. Maximum output is 700 lumens. With head loosened, output is 60 lumens. Loosen-tighten-loosen to get strobe. Has the larger head of the M31.
'''M20 Warrior''' 1-mode 2xCR123A or 18650 forward clicky with [[Cree]] XP-G R5 LED. The light can be set to any of 3 brightness levels (9, 110, or 320 lumens) or strobe by loosening then tightening the bezel. Earlier versions had a Cree XR-E R2 LED with 7, 90, and 250 lumen output. In June 2011 a Cree XM-L T6 module is to be released offering 340 lumens of output maximum. Review: [http://www.candlepowerforums.com/vb/showthread.php?209384 selfbuilt (R2)] [http://archive.light-reviews.com/olight_m20/ Light Reviews (R2)]


'''SR50 Intimidator''' 6xCR123A SST-50 has modes of 200 lumens, 800 lumens, and strobe.  Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. [http://www.olightworld.com/product_show.asp?id=178 Web page]
'''M20 S Warrior''' 4-mode 2xCR123A or 18650 forward clicky Cree XP-G R5 LED. The light can be set to any of 3 brightness levels (5, 110, or 320 lumens) or strobe by using the side switch near the tail. A version with a XP-G S2 LED has output levels of 5, 115, or 340 lumens. In June 2011 a Cree XM-L T6 module is to be released offering 340 lumens of output maximum.  


'''SR90 Intimidator''' Luminus SST-90 with maximum output of 2200 lumens. Low is 700 lumens plus strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. The body is a 6-cell battery pack (6x18650) with charging socket and charge indicator on the tail. [http://www.olightworld.com/product_show.asp?id=174 Web page] Reviews: [http://www.candlepowerforums.com/vb/showthread.php?272521 selfbuilt] [http://www.light-reviews.com/olight_sr90/ Light Reviews]
'''M21 Warrior''' 1-mode 2xCR123A or 18650 forward clicky with [[Luminus]] SST-50 LED. The light can be set to any of 3 brightness levels (20, 80, or 500 lumens) or strobe by loosening and then tightening the head again. Review: [http://www.candlepowerforums.com/vb/showthread.php?256530 selfbuilt]


'''SR91 Intimidator''' Luminus SST-90 with maximum output of 1500 lumens. This light is more compact than the SR90. Low is 450 lumens plus strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. The body is a 6-cell battery pack (6x18650) with charging socket and charge indicator on the tail. Review: [http://www.light-reviews.com/olight_sr91/ Light Reviews]
'''M22 Warrior''' 1-mode 2xCR123A or 18650 forward clicky with Cree XM-L2 LED. The light can be set to any of 3 brightness levels (20, 250, or 950 lumens) or strobe by loosening and then tightening the head again. Introduced in March 2013. Review: [http://www.candlepowerforums.com/vb/showthread.php?358571 selfbuilt]
 
'''M30 Triton''' 4-mode 3xCR123A forward clicky with Cree MC-E LED. Side switch on tail switches modes or engages strobe if light is Off. Body tube extension can be added for 4xCR123A or 2x18650 operation. Brightness levels are 8, 120, and 700 lumens plus strobe.
 
'''M31 Triton''' 1-mode 3xCR123A forward clicky with Luminus SST-50 LED. Output level or strobe can be set by loosening and tightening bezel. The M31 has a larger head (68mm) than the M30 (44mm). Body tube extension can be added for 4xCR123A or 2x18650 operation. Brightness levels are 60, 320, and 800 lumens plus strobe. Review: [http://www.candlepowerforums.com/vb/showthread.php?292989 HKJ]
 
'''M3X Triton''' 2-mode 3xCR123A (4xCR123A/2x18650 with extension) forward clicky with Cree XM-L LED. Maximum output is 700 lumens (475m throw). With head loosened, output is 60 lumens. Loosen-tighten-loosen to get strobe. Has the larger head of the M31.
 
'''M3X XM-L2''' 2-mode 3xCR123A (4xCR123A/2x18650 with extension) forward clicky with Cree XM-L2 LED. Maximum output is 1000 lumens (580m throw). With head loosened, output is 300 lumens. Loosen-tighten-loosen to get strobe. Has the larger head of the M31.
 
'''S10 Baton''' 5-mode 2xCR123A or 1x18650 forward clicky with Cree XM-L. Normal output levels are 5, 70, and 320 lumens. With an electronic switch, holding the power switch goes to a 0.5 lumen Moonlight mode while a double-click gives strobe. A red LED under the power switch indicates a low battery. The interface and look are a little different from earlier Baton models. Introduced in August 2012. There were two limited edition titanium versions released with either polished or bead blasted finish featuring a neutral tint XM-L with maximum output of 300 lumens. Review: [http://www.candlepowerforums.com/vb/showthread.php?344172 Selfbuilt]
 
'''S20 Baton''' 5-mode 1xCR123A forward clicky with Cree XM-L. Normal output levels are 5, 100, and 470 lumens (100m throw). With an electronic switch, holding the power switch goes to a 0.5 lumen Moonlight mode while a double-click gives strobe. A red LED under the power switch indicates a low battery. Introduced in December 2012. Review: [http://www.candlepowerforums.com/vb/showthread.php?350715 Selfbuilt]
 
'''S35 Baton''' 3xAA Cree 4-mode side clicky with Cree XM-L. Output levels are 20, 120, 380 lumens (180m throw), and strobe. Introduced in September 2011. Review: [http://www.candlepowerforums.com/vb/showthread.php?325407 Selfbuilt]
 
'''S65 Baton''' 6xAA Cree 4-mode side clicky with Cree XM-L. Output levels are 20, 200, 700 lumens (250m throw), and strobe. Introduced in September 2011. Review: [http://www.candlepowerforums.com/vb/showthread.php?325407 Selfbuilt]
 
'''SR50 Intimidator''' 6xCR123A SST-50 has modes of 200 lumens, 800 lumens, and strobe.  Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe.
 
'''SR 51 Intimidator''' 6xCR123A/2x18650 Cree XM-L U2 has modes of 250 lumens, 900 lumens (700m throw), and strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. Introduced in June 2011. Review: [http://www.candlepowerforums.com/vb/showthread.php?322323 selfbuilt].
 
'''SR90 Intimidator''' Luminus SST-90 with maximum output of 2200 lumens. Low is 700 lumens plus strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. The body is a 6-cell battery pack (6x18650) with charging socket and charge indicator on the tail.  Reviews: [http://www.candlepowerforums.com/vb/showthread.php?272521 selfbuilt] [http://archive.light-reviews.com/olight_sr90/ Light Reviews]
 
'''SR91 Intimidator''' Luminus SST-90 with maximum output of 1700 lumens (1000m throw). This light is more compact than the SR90. Low is 450 lumens plus strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. The body is a 6-cell battery pack (6x18650) with charging socket and charge indicator on the tail. Review: [http://archive.light-reviews.com/olight_sr91/ Light Reviews]
 
'''SR92 Intimidator''' Triple Cree XM-L T6 LEDs with maximum output of 1500 lumens. This light is more compact than the SR90. Low is 450 lumens plus strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. The body is a 6-cell battery pack (6x18650) with charging socket and charge indicator on the tail. Introduced in June 2011. Review: [http://www.candlepowerforums.com/vb/showthread.php?322320 selfbuilt].
 
'''SR95 Intimidator''' Similar to the SR90 and available with a Luminus SST-90 P with output levels of 120, 600, or 2000 lumens (720m throw) or SBT-90 LED with output levels of 60, 300, or 1050 lumens (820m throw) (the SBT version is called the SR95UT). Introduced in May 2012. The SR95S UT has the round die SBT-70 LED with maximum output of 1250 lumens (1000m throw). Review: [http://www.candlepowerforums.com/vb/showthread.php?338717 Selfbuilt]
 
'''T10''' 1xCR123A 3-mode forward clicky light Cree XP-G R5 LED. Modes are selected by loosening and tightening the head. Output levels are 5, 100, or 190 lumens. Older version with Cree XR-E Q5 had 8 modes with output levels of 6, 15, 38, 85, and 190 lumens plus SOS (High and Low) and Strobe.
 
'''T15''' 1xAA or 1x14500 3-mode forward clicky light Cree XP-G R5 LED. Modes are selected by loosening and tightening the head. Output levels are 3.5, 85, or 100 lumens. Older version with Cree XR-E Q5 had 8 modes with output levels of 6, 15, 38, 85, and 120 lumens plus SOS (High and Low) and Strobe.
 
'''T20''' 2xCR123A (not 18650) 3-mode forward clicky light Cree XP-G R5 LED. Modes are selected by loosening and tightening the head. Output levels are 7, 170, or 310 lumens. Updated to Cree XP-G2 in September 2012 with output of 10, 180, or 380 lumens. Older version with Cree XR-E Q5 had 8 modes with output levels of 15, 33, 65, 120, and 205 lumens plus SOS (High and Low) and Strobe.
 
'''T25''' 2xAA 3-mode forward clicky light Cree XP-G R5 LED. Modes are selected by loosening and tightening the head. Output levels are 14, 110, or 210 lumens. Updated to Cree XP-G2 in September 2012 with output of 15, 120, or 250 lumens. Older version with Cree XR-E Q5 had 8 modes with output levels of 6, 15, 45, 90, and 190 lumens plus SOS (High and Low) and Strobe.


==Popular Dealers==
==Popular Dealers==


'''[http://www.batteryjunction.com/ Battery Junction]''' Sells many brands. Store is based on Connecticut. Discount available through the [http://www.cpfmarketplace.com/mp/showthread.php?181841 CPF Good Deals] thread.
'''[http://www.batteryjunction.com/ Battery Junction]''' Sells many brands. Store is based on Connecticut. Discount available through the [http://www.cpfmarketplace.com/mp/showthread.php?181841 CPF Good Deals] thread.
'''[http://goinggear.com/ Going Gear]''' Has a huge selection but is a favorite for Olight lights. Store is located in Georgia. Good discounts usually available on their website or at CPF.

Latest revision as of 07:42, 9 August 2022

Olight Technology Co., Ltd., is based in Guangdong, China. They produce higher end lights and also owned iTP. Their board chairman is the owner of Foursevens with whom they have a "strategic alliance." Website: www.olightworld.com.

Lights

i1 EOS - 1xCR123A 3-mode twisty with a Cree XM-L LED. Output is 4, 40, or 180 ANSI lumens (68m throw). Introduced in August 2011 as a replacement of the iTP A1 EOS.

i2 EOS - 1xAA 3-mode twisty with a Cree XP-G R5. Output is 2.5, 20, or 75 ANSI lumens (50m throw). Introduced in August 2011 as a replacement of the iTP A2 EOS.

i3 EOS - 1xAAA 3-mode twisty with Cree XP-G R5 LED. Output is 2.5, 20, or 70 ANSI lumens (37m throw). Introduced in August 2011 as a replacement of the iTP A3 EOS. The clip at the tail is screwed in, but can be removed.

i3s EOS - 1xAAA 4-mode twisty with Cree XP-G2 R5 LED. Output is 0.5, 20, or 80 ANSI lumens (38m throw). A hidden strobe mode is available after cycling through the 3 regular modes twice. Mode order is Medium, High, Low. The clip snaps on like the old iTP A3 EOS, and is reversible. Introduced in December 2012.

i6 Paladin - 1x18650/17670 or 2xCR123A 2-mode light with Cree XM-L LED. Output is 80 or 420 ANSI lumens (200m throw). Introduced in August 2011 as a replacement of the iTP C6.

M20 Warrior 1-mode 2xCR123A or 18650 forward clicky with Cree XP-G R5 LED. The light can be set to any of 3 brightness levels (9, 110, or 320 lumens) or strobe by loosening then tightening the bezel. Earlier versions had a Cree XR-E R2 LED with 7, 90, and 250 lumen output. In June 2011 a Cree XM-L T6 module is to be released offering 340 lumens of output maximum. Review: selfbuilt (R2) Light Reviews (R2)

M20 S Warrior 4-mode 2xCR123A or 18650 forward clicky Cree XP-G R5 LED. The light can be set to any of 3 brightness levels (5, 110, or 320 lumens) or strobe by using the side switch near the tail. A version with a XP-G S2 LED has output levels of 5, 115, or 340 lumens. In June 2011 a Cree XM-L T6 module is to be released offering 340 lumens of output maximum.

M21 Warrior 1-mode 2xCR123A or 18650 forward clicky with Luminus SST-50 LED. The light can be set to any of 3 brightness levels (20, 80, or 500 lumens) or strobe by loosening and then tightening the head again. Review: selfbuilt

M22 Warrior 1-mode 2xCR123A or 18650 forward clicky with Cree XM-L2 LED. The light can be set to any of 3 brightness levels (20, 250, or 950 lumens) or strobe by loosening and then tightening the head again. Introduced in March 2013. Review: selfbuilt

M30 Triton 4-mode 3xCR123A forward clicky with Cree MC-E LED. Side switch on tail switches modes or engages strobe if light is Off. Body tube extension can be added for 4xCR123A or 2x18650 operation. Brightness levels are 8, 120, and 700 lumens plus strobe.

M31 Triton 1-mode 3xCR123A forward clicky with Luminus SST-50 LED. Output level or strobe can be set by loosening and tightening bezel. The M31 has a larger head (68mm) than the M30 (44mm). Body tube extension can be added for 4xCR123A or 2x18650 operation. Brightness levels are 60, 320, and 800 lumens plus strobe. Review: HKJ

M3X Triton 2-mode 3xCR123A (4xCR123A/2x18650 with extension) forward clicky with Cree XM-L LED. Maximum output is 700 lumens (475m throw). With head loosened, output is 60 lumens. Loosen-tighten-loosen to get strobe. Has the larger head of the M31.

M3X XM-L2 2-mode 3xCR123A (4xCR123A/2x18650 with extension) forward clicky with Cree XM-L2 LED. Maximum output is 1000 lumens (580m throw). With head loosened, output is 300 lumens. Loosen-tighten-loosen to get strobe. Has the larger head of the M31.

S10 Baton 5-mode 2xCR123A or 1x18650 forward clicky with Cree XM-L. Normal output levels are 5, 70, and 320 lumens. With an electronic switch, holding the power switch goes to a 0.5 lumen Moonlight mode while a double-click gives strobe. A red LED under the power switch indicates a low battery. The interface and look are a little different from earlier Baton models. Introduced in August 2012. There were two limited edition titanium versions released with either polished or bead blasted finish featuring a neutral tint XM-L with maximum output of 300 lumens. Review: Selfbuilt

S20 Baton 5-mode 1xCR123A forward clicky with Cree XM-L. Normal output levels are 5, 100, and 470 lumens (100m throw). With an electronic switch, holding the power switch goes to a 0.5 lumen Moonlight mode while a double-click gives strobe. A red LED under the power switch indicates a low battery. Introduced in December 2012. Review: Selfbuilt

S35 Baton 3xAA Cree 4-mode side clicky with Cree XM-L. Output levels are 20, 120, 380 lumens (180m throw), and strobe. Introduced in September 2011. Review: Selfbuilt

S65 Baton 6xAA Cree 4-mode side clicky with Cree XM-L. Output levels are 20, 200, 700 lumens (250m throw), and strobe. Introduced in September 2011. Review: Selfbuilt

SR50 Intimidator 6xCR123A SST-50 has modes of 200 lumens, 800 lumens, and strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe.

SR 51 Intimidator 6xCR123A/2x18650 Cree XM-L U2 has modes of 250 lumens, 900 lumens (700m throw), and strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. Introduced in June 2011. Review: selfbuilt.

SR90 Intimidator Luminus SST-90 with maximum output of 2200 lumens. Low is 700 lumens plus strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. The body is a 6-cell battery pack (6x18650) with charging socket and charge indicator on the tail. Reviews: selfbuilt Light Reviews

SR91 Intimidator Luminus SST-90 with maximum output of 1700 lumens (1000m throw). This light is more compact than the SR90. Low is 450 lumens plus strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. The body is a 6-cell battery pack (6x18650) with charging socket and charge indicator on the tail. Review: Light Reviews

SR92 Intimidator Triple Cree XM-L T6 LEDs with maximum output of 1500 lumens. This light is more compact than the SR90. Low is 450 lumens plus strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. The body is a 6-cell battery pack (6x18650) with charging socket and charge indicator on the tail. Introduced in June 2011. Review: selfbuilt.

SR95 Intimidator Similar to the SR90 and available with a Luminus SST-90 P with output levels of 120, 600, or 2000 lumens (720m throw) or SBT-90 LED with output levels of 60, 300, or 1050 lumens (820m throw) (the SBT version is called the SR95UT). Introduced in May 2012. The SR95S UT has the round die SBT-70 LED with maximum output of 1250 lumens (1000m throw). Review: Selfbuilt

T10 1xCR123A 3-mode forward clicky light Cree XP-G R5 LED. Modes are selected by loosening and tightening the head. Output levels are 5, 100, or 190 lumens. Older version with Cree XR-E Q5 had 8 modes with output levels of 6, 15, 38, 85, and 190 lumens plus SOS (High and Low) and Strobe.

T15 1xAA or 1x14500 3-mode forward clicky light Cree XP-G R5 LED. Modes are selected by loosening and tightening the head. Output levels are 3.5, 85, or 100 lumens. Older version with Cree XR-E Q5 had 8 modes with output levels of 6, 15, 38, 85, and 120 lumens plus SOS (High and Low) and Strobe.

T20 2xCR123A (not 18650) 3-mode forward clicky light Cree XP-G R5 LED. Modes are selected by loosening and tightening the head. Output levels are 7, 170, or 310 lumens. Updated to Cree XP-G2 in September 2012 with output of 10, 180, or 380 lumens. Older version with Cree XR-E Q5 had 8 modes with output levels of 15, 33, 65, 120, and 205 lumens plus SOS (High and Low) and Strobe.

T25 2xAA 3-mode forward clicky light Cree XP-G R5 LED. Modes are selected by loosening and tightening the head. Output levels are 14, 110, or 210 lumens. Updated to Cree XP-G2 in September 2012 with output of 15, 120, or 250 lumens. Older version with Cree XR-E Q5 had 8 modes with output levels of 6, 15, 45, 90, and 190 lumens plus SOS (High and Low) and Strobe.

Popular Dealers

Battery Junction Sells many brands. Store is based on Connecticut. Discount available through the CPF Good Deals thread.

Going Gear Has a huge selection but is a favorite for Olight lights. Store is located in Georgia. Good discounts usually available on their website or at CPF.