Olight: Difference between revisions
(fill in some details on light models) |
(add M20) |
||
| Line 3: | Line 3: | ||
==Lights== | ==Lights== | ||
'''M20 | '''M20 Warrior''' 1-mode 2xCR123A or 18650 forward clicky with [[Cree]] XP-G R5 LED. The light can be set to any of 3 brightness levels (9, 110, or 320 lumens) or strobe by loosening then tightening the bezel. Earlier versions had a Cree XR-E R2 LED with 7, 90, and 250 lumen output. | ||
'''M20 S Warrior''' 4-mode 2xCR123A or 18650 forward clicky Cree XP-G R5 LED. The light can be set to any of 3 brightness levels (5, 110, or 320 lumens) or strobe by using the side switch near the tail. A version with a XP-G S2 LED has output levels of 5, 115, or 340 lumens. [http://www.olightworld.com/product_show.asp?id=190 Web page] | |||
'''M21 Warrior''' 1-mode 2xCR123A or 18650 forward clicky with [[Luminus]] SST-50 LED. The light can be set to any of 3 brightness levels (20, 80, or 500 lumens) or strobe by loosening and then tightening the head again. Has a bigger reflector than the M20 for better throw. [http://www.olightworld.com/product_show.asp?id=173 Web page] | '''M21 Warrior''' 1-mode 2xCR123A or 18650 forward clicky with [[Luminus]] SST-50 LED. The light can be set to any of 3 brightness levels (20, 80, or 500 lumens) or strobe by loosening and then tightening the head again. Has a bigger reflector than the M20 for better throw. [http://www.olightworld.com/product_show.asp?id=173 Web page] | ||
Revision as of 23:56, 11 December 2010
Olight Technology Co., Ltd., is based in Guangdong, China. They produce higher end lights and also own iTP.
Lights
M20 Warrior 1-mode 2xCR123A or 18650 forward clicky with Cree XP-G R5 LED. The light can be set to any of 3 brightness levels (9, 110, or 320 lumens) or strobe by loosening then tightening the bezel. Earlier versions had a Cree XR-E R2 LED with 7, 90, and 250 lumen output.
M20 S Warrior 4-mode 2xCR123A or 18650 forward clicky Cree XP-G R5 LED. The light can be set to any of 3 brightness levels (5, 110, or 320 lumens) or strobe by using the side switch near the tail. A version with a XP-G S2 LED has output levels of 5, 115, or 340 lumens. Web page
M21 Warrior 1-mode 2xCR123A or 18650 forward clicky with Luminus SST-50 LED. The light can be set to any of 3 brightness levels (20, 80, or 500 lumens) or strobe by loosening and then tightening the head again. Has a bigger reflector than the M20 for better throw. Web page
M30 Triton 4-mode 3xCR123A forward clicky with Cree MC-E LED. Side switch on tail switches modes or engages strobe if light is Off. Body tube extension can be added for 4xCR123A or 2x18650 operation. Brightness levels are 8, 120, and 700 lumens plus strobe. Web page
M31 Triton 1-mode 3xCR123A forward clicky with Luminus SST-50 LED. Output level or strobe can be set by loosening and tightening bezel. The M31 has a larger head than the M30. Body tube extension can be added for 4xCR123A or 2x18650 operation. Brightness levels are 60, 320, and 800 lumens plus strobe. Web page
M3X Upcoming version with Cree XM-L LED.
SR50 Intimidator 6xCR123A SST-50 has modes of 200 lumens, 800 lumens, and strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. Web page
SR90 Intimidator Luminus SST-90 with maximum output of 2200 lumens. Low is 700 lumens plus strobe. Side clicky to turn light On; hold the switch down to switch modes; and double-click for strobe. The body is a 6-cell battery pack (6x18650) with charging socket and charge indicator on the tail. Web page
SR91 Luminus SST-90 with maximum output of 1500 lumens. Uses a 6-cell battery pack (6x18650).