File list
Jump to navigation
Jump to search
This special page shows all uploaded files.
Date | Name | Thumbnail | Size | User | Description | Versions |
---|---|---|---|---|---|---|
09:19, 15 May 2011 | P60-ledwired.jpg (file) | 71 KB | Brted | The LED with leads from the driver soldered in place. Make sure the solder points don't stick up too high or they could interfere with the reflector. | 1 | |
08:40, 9 April 2011 | Soic8clip.jpg (file) | 74 KB | Brted | An SOIC 8 clip with ribbon cable attached. The individual wires of the ribbon must be re-ordered to attach to the correct pins of the Atmel chip the clip will attach to. The 8-wire ribbon has a 10-wire plug that attaches to the USB ISP programmer. | 1 | |
21:36, 28 November 2010 | Itpa3eos.jpg (file) | 76 KB | Brted | iTP A3 EOS in gray, titanium, and black, with lobster claw keychain | 1 | |
13:46, 6 April 2013 | Tailcap.jpg (file) | 79 KB | Brted | Flashlight tailcap showing spring and retaining ring with dimples. Use needlenose pliers in the dimples to tighten the ring. This tailcap is from an Ultrafire WF-502B. | 1 | |
20:12, 28 November 2010 | Quark-123-2.jpg (file) | 81 KB | Brted | Quark 123-2 Tactical flashlight by 4Sevens | 1 | |
20:03, 27 November 2010 | Akorayk106.jpg (file) | 81 KB | Brted | 2 | ||
16:14, 24 June 2013 | DIY SOIC Clip.jpg (file) | 83 KB | JackCY | DIY SOIC Clip. | 1 | |
11:50, 4 December 2010 | Nanjg-106-driver.jpg (file) | 83 KB | Brted | The NANJG 106 driver with 4 7135 linear regulators (4 more are on the bottom). | 1 | |
10:01, 4 December 2010 | Battery-sizes.jpg (file) | 88 KB | Brted | Comparison of battery sizes. From the left: AAA, AA, 18650, and 2 CR123A's. | 1 | |
14:23, 31 December 2010 | Ssctints.jpg (file) | 89 KB | Brted | Previous version was not for P4 and P7 LED's. This one is. | 2 | |
09:21, 18 January 2011 | Sscp4.jpg (file) | 90 KB | Brted | Seoul Semiconductor P4 LED, U bin. Photo by Peter Cheuk, used with permission. | 1 | |
08:37, 9 April 2011 | Avrisp.jpg (file) | 95 KB | Brted | An SOIC 8 clip attached to an Atmel Tiny13A chip on a flashlight driver board. This is the NANJG AK-47 driver. | 1 | |
21:28, 17 April 2011 | Turnigy.jpg (file) | 104 KB | Brted | Turnigy Accucell 6 hobby charger | 1 | |
20:42, 6 December 2015 | Flashlight-parts.jpg (file) | 109 KB | Brted | Exploded view of Supfire A6-T6 by BLF member djozz, annotated by BLF member KGB. Used with permission. | 1 | |
17:23, 11 February 2012 | Mobile-menu.png (file) | 114 KB | Brted | Screenshot of the mobile version of the Flashlight Wiki showing the drop down menu. Taken on a iPod Touch 4G. | 1 | |
17:22, 11 February 2012 | Mobile-home.png (file) | 122 KB | Brted | Screenshot of the mobile version of the Flashlight Wiki home page, taken on an iPod Touch 4G. | 1 | |
17:03, 8 April 2011 | Ak47pins.jpg (file) | 128 KB | Brted | Picture of NANJG AK-47 driver with ATMEL ATTiny13 pin numbers labelled. | 1 | |
07:24, 25 February 2016 | A17l-fet+1.jpg (file) | 140 KB | Brted | A17L FET + 1 driver developed by Wight and used in the BLF A6. The microprocessor on the left controls the FET (on the right) and the 7135 (bottom) provides regulation for Low and Medium modes. | 1 | |
15:12, 23 January 2011 | Maglites.jpg (file) | 148 KB | Brted | Mini Maglites 2xAA and 2xAAA in pewter | 1 | |
11:25, 11 December 2010 | Solarforcex2.jpg (file) | 155 KB | Brted | Solarforce L2 (gunmetal gray) and L2i (sand). | 1 | |
16:29, 25 February 2012 | Sunwayman-v10a.jpg (file) | 171 KB | Brted | Sunwayman V10A with Cree XP-G R5 | 1 | |
13:09, 28 February 2015 | Digichargerd4.jpg (file) | 179 KB | Brted | Nitecore Digicharger D4 can charge 4 batteries of different sizes and chemistries including NiMH, Li-ion, IMR, and LiFePo4 and has a digital readout for voltage, current, time, and charging status. | 1 | |
10:44, 2 July 2013 | Nanjg 105C. 600.jpg (file) | 183 KB | JackCY | Updated layout under ATtiny13A based on another image reference. | 1 | |
09:19, 18 January 2011 | Luxeon rebel.jpg (file) | 185 KB | Brted | Luxeon Rebel LED in a Maglite. Photo by Peter Cheuk, used with permission. | 1 | |
16:34, 25 February 2012 | Fenix-l2d-p2d.jpg (file) | 200 KB | Brted | Fenix L2D and P2D Premium Q5 with Cree XR-E Q5 LED, olive colored | 1 | |
14:14, 4 May 2014 | Sunwaymand40a.jpg (file) | 222 KB | Brted | Sunwayman D40A | 1 | |
09:28, 18 February 2012 | Baked-anodized-lights.jpg (file) | 222 KB | Brted | Three lights that were originally black, after being broiled in an oven at 500 degrees F for 30 minutes. The resulting color varies from one manufacturer to another, with the biggest tint shifts available from Type II anodizing, which is more common on bu | 1 | |
16:32, 29 September 2013 | Ultrafire-c8.jpg (file) | 250 KB | Brted | UltraFire C8 is an 18650 light with a larger diameter head for greater throw. | 1 | |
20:24, 30 November 2011 | Ledtints.jpg (file) | 271 KB | Brted | From left to right (white balance set to 5,200K): Quark MiNi AA (cool white XP-G R5), Olight T20-M (XR-E Q5), Quark 123² Turbo (XP-G S2), 4Sevens Preon 2 (neutral XP-G R4), Quark RGB (neutral white MC-E), SureFire 6P (incandescent), 4Sevens Preon 2 ( | 1 | |
20:07, 30 December 2010 | Luminus.jpg (file) | 384 KB | Brted | Luminus tint binning nomenclature, based on ANSI white | 1 | |
17:12, 29 June 2013 | Ansi-white.jpg (file) | 395 KB | Brted | Chromaticity chart with divisions used by Cree and Philips Lumiled with some subdivisions used only by Cree. This chart was generated by CPF user DFiorentino and is used at Flashlight Wiki by permission. | 1 | |
13:04, 4 July 2013 | Ansiwhite.jpg (file) | 395 KB | Brted | Not worried about hotlinking anymore | 2 |