File list
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 23:38, 1 January 2011 | Eqn-throw.png (file) |  |
5 KB | Brted | Equations for converting throw to candela based on ANSI/NEMA FL-1 standard of 0.25 lux | 1 |
| 16:06, 24 June 2013 | MHV AVR Tools and Atmel Studio 6.1 configuration in AVR Eclipse.png (file) |  |
7 KB | JackCY | 1 | |
| 19:26, 30 December 2010 | Ansiwhite.png (file) |  |
10 KB | Brted | Add CCT values | 2 |
| 20:06, 6 March 2016 | Nichia219c.jpg (file) |  |
17 KB | Brted | rotated to put cathode at lower left like other pictures | 2 |
| 21:47, 15 October 2012 | Luxeonc.jpg (file) |  |
20 KB | Brted | Luxeon C LED, from a Maglite Solitaire LED flashlight | 1 |
| 11:01, 24 December 2010 | Incan.jpg (file) |  |
22 KB | Brted | Incandescent bulbs: a PR flange bulb from a Black and Decker Snakelight (3.2V) and a bi-pin bulb from a Mini Maglite. | 1 |
| 16:47, 5 December 2010 | Cree xp-e.jpg (file) |  |
27 KB | Brted | Cree XP-E LED (from a Trustfire XP-E F23) | 1 |
| 12:36, 1 February 2015 | Nichia219b.jpg (file) |  |
28 KB | Brted | Nichia 219b LED | 1 |
| 15:06, 1 March 2013 | Coatedlens.jpg (file) |  |
28 KB | Brted | The glass lens with anti-reflective coating on the right shows an obvious decrease in the amount of light reflected onto the wall vs. the uncoated plastic lens in the center and the uncoated glass lens on the left. Because of the sharp angle of light o... | 1 |
| 11:34, 4 December 2010 | Materials.jpg (file) |  |
28 KB | Brted | Flashlights of 3 materials (from left): HA III aluminum, titanium, stainless steel | 1 |
| 16:50, 5 December 2010 | Cree xp-g.jpg (file) |  |
32 KB | Brted | Cree XP-G R5 LED (from Ultrafire WF-502B) | 1 |
| 22:39, 26 February 2011 | Sony-bcg34hld.jpg (file) |  |
32 KB | Brted | Sony BCG-34HLD charger with Sony Cycle Energy 1000mA LSD battery | 1 |
| 21:02, 28 November 2010 | Creexpgr5.jpg (file) |  |
32 KB | Brted | Cree XP-G R5 LED | 1 |
| 13:06, 4 July 2013 | Cree xr-e.jpg (file) |  |
36 KB | Brted | Not worried about hotlinking anymore | 2 |
| 12:54, 29 June 2013 | Cree xre.jpg (file) |  |
36 KB | Brted | Cree XR-E LED (from a Uniquefire S10). The brown outline around the die indicates this XR-E uses the smaller EZ900 die | 1 |
| 11:33, 4 December 2010 | Duraloop.jpg (file) |  |
37 KB | Brted | Comparison of white-top Duracell Precharged cell and Eneloop. | 1 |
| 18:31, 27 May 2012 | Cree-xpc.jpg (file) |  |
38 KB | Brted | Cree XP-C LED installed under the reflector of a Streamlight Microstream. | 1 |
| 12:00, 7 February 2016 | Xp-l.jpg (file) |  |
38 KB | Brted | 2 | |
| 21:24, 29 May 2012 | Osram-oslon.jpg (file) |  |
41 KB | Brted | Osram Oslon Square LED | 1 |
| 13:30, 4 December 2010 | Maha-c9000.jpg (file) |  |
41 KB | Brted | The Powerex Maha-C9000 AA/AAA battery charger and conditioner | 1 |
| 19:05, 4 September 2012 | Xpg2.jpg (file) |  |
42 KB | Brted | Cree XP-G2 LED | 1 |
| 09:59, 4 December 2010 | Cree mc-e.jpg (file) |  |
42 KB | Brted | Cree MC-E LED with 4 LED dies (or "dice") | 1 |
| 18:59, 10 May 2012 | Nichia219.jpg (file) |  |
43 KB | Brted | Nichia 219 LED has the same footprint as a Cree XP-G | 1 |
| 21:45, 14 May 2011 | P60-center.jpg (file) |  |
44 KB | Brted | Once the LED is in place, you can check whether it is centered by screwing the reflector over it. Before the adhesive sets up, you make adjustments to get the LED perfectly centered. | 1 |
| 09:39, 9 April 2016 | Cree XP-E2.jpg (file) |  |
45 KB | Brted | a little brighter | 2 |
| 18:37, 3 October 2012 | Creexb-d.jpg (file) |  |
45 KB | Brted | Cree XB-D LED is similar to the XT-E, but smaller. | 1 |
| 09:30, 7 June 2012 | Samsung3535.jpg (file) |  |
45 KB | Brted | Samsung 3535 LED from a Ultrafire P60 drop-in sold by Manafont. | 1 |
| 20:54, 28 November 2010 | Sscp7led.jpg (file) |  |
47 KB | Brted | Seoul Semiconductor P7 LED | 1 |
| 09:09, 15 May 2011 | P60-positive.jpg (file) |  |
47 KB | Brted | The bottom of the driver board with the small spring for contact with the positive end of the battery and solder bridges from the driver board to the pill. | 1 |
| 23:57, 4 December 2010 | Luminus SST-90.jpg (file) |  |
50 KB | Brted | Luminus SST-90 LED from a Varapower prototype. Photo courtesy of Don. | 1 |
| 21:25, 14 May 2011 | P60-parts.jpg (file) |  |
51 KB | Brted | Parts to build a P60 drop-in. The only things not shown here are an isolation disk and the lead wires from the driver to the LED. | 1 |
| 08:48, 9 April 2011 | Usbisp.jpg (file) |  |
52 KB | Brted | USB ISP AVR programming board. This attaches to the computer and the ribbon from the clip attaches to this board. | 1 |
| 12:26, 17 December 2010 | Nanjg101ak.jpg (file) |  |
53 KB | Brted | The NANJG 101-AK driver | 1 |
| 14:28, 15 May 2011 | P60-disk.jpg (file) |  |
55 KB | Brted | Isolation disk placed over the top of the driver. This prevents the aluminum reflector causing a short between the positive and negative parts of the LED. This is a 18mm disk, but it is better to get a 16mm disk which fits inside the outer rim of the pill | 1 |
| 11:47, 4 December 2010 | Nanjg-112A-driver.jpg (file) |  |
55 KB | Brted | The 17mm NANJG 112A boost driver | 1 |
| 22:00, 28 November 2010 | Ultrafires.jpg (file) |  |
55 KB | Brted | From the top: UltraFire models MCU WF-1200L, WF-504B, WF-502B, and WF-501B | 1 |
| 16:04, 14 March 2013 | Cree-xte.jpg (file) |  |
57 KB | Brted | rotate image 90 degrees to match other LED's on page | 2 |
| 21:40, 14 May 2011 | P60-ledmounted.jpg (file) |  |
58 KB | Brted | The LED is glued to the top of the brass pill with thermal adhesive. The key is to get the LED centered and not to cover the holes where the leads from the driver will come up to attach to the LED later. | 1 |
| 14:35, 12 January 2011 | Magleds.jpg (file) |  |
60 KB | Brted | Maglite LED's for 3xD cell lights: on left the newer Cree XP-E with the Rebel on the right. Some Maglites started using the XP-E in late 2010. Photo by Peter Cheuk, used with permission. | 1 |
| 00:15, 28 November 2010 | Osram-led.jpg (file) |  |
60 KB | Brted | Osram LED from a UniqueFire AA-S1 flashlight | 1 |
| 12:10, 3 February 2013 | Cree-xml.jpg (file) |  |
62 KB | Brted | Updated picture isn't as dark. The LED shown is a neutral XM-L from Illumination Supply | 2 |
| 19:54, 28 November 2010 | P60dropin-and-strips.jpg (file) |  |
64 KB | Brted | A P60 drop-in and UltraFire WF 502B host with aluminum strips cut from a soda can to provide better heatsinking for the drop-in. | 1 |
| 09:03, 9 April 2011 | Ribbon.jpg (file) |  |
66 KB | Brted | The 8-wire ribbon from the clip must be modified to connect to Pin 9 of the USB ISP programmer. Open up the end of the ribbon and move wire 8 over to the 9th position then reassemble. | 1 |
| 21:56, 6 March 2011 | Tir-optic.jpg (file) |  |
66 KB | Brted | Total internal reflection optic. This lens is made of plastic and came with the Mr.Lite BLF-Y4E, which has a Cree XR-E Q5 LED. | 1 |
| 18:59, 8 March 2016 | Cree-xpl-hi.jpg (file) |  |
67 KB | Brted | 2 | |
| 22:14, 14 May 2011 | P60-leads.jpg (file) |  |
67 KB | Brted | Red and black leads are soldered to the driver board. It helps to hold the work in a vise (this is a PanaVise). A magnifying lens helps too (this is called a third hand). | 1 |
| 13:48, 6 April 2013 | Tail.jpg (file) |  |
68 KB | Brted | End of flashlight with tail removed. To bypass the switch, use a wire or paper clip to connect the negative end of the battery to the bare metal threads on the tube. The light should light up. If you have an amp meter, you can measure tailcap current d... | 1 |
| 09:28, 15 May 2011 | P60-driverdry.jpg (file) |  |
69 KB | Brted | square picture | 2 |
| 21:30, 28 November 2010 | Solarforcel2.jpg (file) |  |
69 KB | Brted | Solarforce L2 in gunmetal gray | 1 |
| 12:08, 3 February 2013 | Creexm-l2.jpg (file) |  |
70 KB | Brted | The Cree XM-L2 LED is the same size as the original XM-L, but it is a new design. The top is silver, the strips are gone, and there are only 2 bonding wires instead of 3. The LED shown is a T6 flux bin with 3C tint bin from International Outdoor. | 1 |
