Uploads by Brted

Jump to navigation Jump to search

This special page shows all uploaded files.

File list
First pagePrevious pageNext pageLast page
Date Name Thumbnail Size Description Versions
20:03, 27 November 2010 Akorayk106.jpg (file) 81 KB   2
00:15, 28 November 2010 Osram-led.jpg (file) 60 KB Osram LED from a UniqueFire AA-S1 flashlight 1
19:54, 28 November 2010 P60dropin-and-strips.jpg (file) 64 KB A P60 drop-in and UltraFire WF 502B host with aluminum strips cut from a soda can to provide better heatsinking for the drop-in. 1
20:12, 28 November 2010 Quark-123-2.jpg (file) 81 KB Quark 123-2 Tactical flashlight by 4Sevens 1
20:54, 28 November 2010 Sscp7led.jpg (file) 47 KB Seoul Semiconductor P7 LED 1
21:02, 28 November 2010 Creexpgr5.jpg (file) 32 KB Cree XP-G R5 LED 1
21:30, 28 November 2010 Solarforcel2.jpg (file) 69 KB Solarforce L2 in gunmetal gray 1
21:36, 28 November 2010 Itpa3eos.jpg (file) 76 KB iTP A3 EOS in gray, titanium, and black, with lobster claw keychain 1
22:00, 28 November 2010 Ultrafires.jpg (file) 55 KB From the top: UltraFire models MCU WF-1200L, WF-504B, WF-502B, and WF-501B 1
09:59, 4 December 2010 Cree mc-e.jpg (file) 42 KB Cree MC-E LED with 4 LED dies (or "dice") 1
10:01, 4 December 2010 Battery-sizes.jpg (file) 88 KB Comparison of battery sizes. From the left: AAA, AA, 18650, and 2 CR123A's. 1
11:33, 4 December 2010 Duraloop.jpg (file) 37 KB Comparison of white-top Duracell Precharged cell and Eneloop. 1
11:34, 4 December 2010 Materials.jpg (file) 28 KB Flashlights of 3 materials (from left): HA III aluminum, titanium, stainless steel 1
11:47, 4 December 2010 Nanjg-112A-driver.jpg (file) 55 KB The 17mm NANJG 112A boost driver 1
11:50, 4 December 2010 Nanjg-106-driver.jpg (file) 83 KB The NANJG 106 driver with 4 7135 linear regulators (4 more are on the bottom). 1
13:30, 4 December 2010 Maha-c9000.jpg (file) 41 KB The Powerex Maha-C9000 AA/AAA battery charger and conditioner 1
23:57, 4 December 2010 Luminus SST-90.jpg (file) 50 KB Luminus SST-90 LED from a Varapower prototype. Photo courtesy of Don. 1
16:47, 5 December 2010 Cree xp-e.jpg (file) 27 KB Cree XP-E LED (from a Trustfire XP-E F23) 1
16:50, 5 December 2010 Cree xp-g.jpg (file) 32 KB Cree XP-G R5 LED (from Ultrafire WF-502B) 1
11:25, 11 December 2010 Solarforcex2.jpg (file) 155 KB Solarforce L2 (gunmetal gray) and L2i (sand). 1
12:26, 17 December 2010 Nanjg101ak.jpg (file) 53 KB The NANJG 101-AK driver 1
11:01, 24 December 2010 Incan.jpg (file) 22 KB Incandescent bulbs: a PR flange bulb from a Black and Decker Snakelight (3.2V) and a bi-pin bulb from a Mini Maglite. 1
19:26, 30 December 2010 Ansiwhite.png (file) 10 KB Add CCT values 2
20:07, 30 December 2010 Luminus.jpg (file) 384 KB Luminus tint binning nomenclature, based on ANSI white 1
14:23, 31 December 2010 Ssctints.jpg (file) 89 KB Previous version was not for P4 and P7 LED's. This one is. 2
23:38, 1 January 2011 Eqn-throw.png (file) 5 KB Equations for converting throw to candela based on ANSI/NEMA FL-1 standard of 0.25 lux 1
14:35, 12 January 2011 Magleds.jpg (file) 60 KB Maglite LED's for 3xD cell lights: on left the newer Cree XP-E with the Rebel on the right. Some Maglites started using the XP-E in late 2010. Photo by Peter Cheuk, used with permission. 1
09:19, 18 January 2011 Luxeon rebel.jpg (file) 185 KB Luxeon Rebel LED in a Maglite. Photo by Peter Cheuk, used with permission. 1
09:21, 18 January 2011 Sscp4.jpg (file) 90 KB Seoul Semiconductor P4 LED, U bin. Photo by Peter Cheuk, used with permission. 1
15:12, 23 January 2011 Maglites.jpg (file) 148 KB Mini Maglites 2xAA and 2xAAA in pewter 1
22:39, 26 February 2011 Sony-bcg34hld.jpg (file) 32 KB Sony BCG-34HLD charger with Sony Cycle Energy 1000mA LSD battery 1
21:56, 6 March 2011 Tir-optic.jpg (file) 66 KB Total internal reflection optic. This lens is made of plastic and came with the Mr.Lite BLF-Y4E, which has a Cree XR-E Q5 LED. 1
17:03, 8 April 2011 Ak47pins.jpg (file) 128 KB Picture of NANJG AK-47 driver with ATMEL ATTiny13 pin numbers labelled. 1
08:37, 9 April 2011 Avrisp.jpg (file) 95 KB An SOIC 8 clip attached to an Atmel Tiny13A chip on a flashlight driver board. This is the NANJG AK-47 driver. 1
08:40, 9 April 2011 Soic8clip.jpg (file) 74 KB An SOIC 8 clip with ribbon cable attached. The individual wires of the ribbon must be re-ordered to attach to the correct pins of the Atmel chip the clip will attach to. The 8-wire ribbon has a 10-wire plug that attaches to the USB ISP programmer. 1
08:48, 9 April 2011 Usbisp.jpg (file) 52 KB USB ISP AVR programming board. This attaches to the computer and the ribbon from the clip attaches to this board. 1
09:03, 9 April 2011 Ribbon.jpg (file) 66 KB The 8-wire ribbon from the clip must be modified to connect to Pin 9 of the USB ISP programmer. Open up the end of the ribbon and move wire 8 over to the 9th position then reassemble. 1
21:28, 17 April 2011 Turnigy.jpg (file) 104 KB Turnigy Accucell 6 hobby charger 1
21:25, 14 May 2011 P60-parts.jpg (file) 51 KB Parts to build a P60 drop-in. The only things not shown here are an isolation disk and the lead wires from the driver to the LED. 1
21:40, 14 May 2011 P60-ledmounted.jpg (file) 58 KB The LED is glued to the top of the brass pill with thermal adhesive. The key is to get the LED centered and not to cover the holes where the leads from the driver will come up to attach to the LED later. 1
21:45, 14 May 2011 P60-center.jpg (file) 44 KB Once the LED is in place, you can check whether it is centered by screwing the reflector over it. Before the adhesive sets up, you make adjustments to get the LED perfectly centered. 1
22:14, 14 May 2011 P60-leads.jpg (file) 67 KB Red and black leads are soldered to the driver board. It helps to hold the work in a vise (this is a PanaVise). A magnifying lens helps too (this is called a third hand). 1
09:09, 15 May 2011 P60-positive.jpg (file) 47 KB The bottom of the driver board with the small spring for contact with the positive end of the battery and solder bridges from the driver board to the pill. 1
09:19, 15 May 2011 P60-ledwired.jpg (file) 71 KB The LED with leads from the driver soldered in place. Make sure the solder points don't stick up too high or they could interfere with the reflector. 1
09:28, 15 May 2011 P60-driverdry.jpg (file) 69 KB square picture 2
14:28, 15 May 2011 P60-disk.jpg (file) 55 KB Isolation disk placed over the top of the driver. This prevents the aluminum reflector causing a short between the positive and negative parts of the LED. This is a 18mm disk, but it is better to get a 16mm disk which fits inside the outer rim of the pill 1
20:24, 30 November 2011 Ledtints.jpg (file) 271 KB From left to right (white balance set to 5,200K): Quark MiNi AA (cool white XP-G R5), Olight T20-M (XR-E Q5), Quark 123² Turbo (XP-G S2), 4Sevens Preon 2 (neutral XP-G R4), Quark RGB (neutral white MC-E), SureFire 6P (incandescent), 4Sevens Preon 2 ( 1
17:22, 11 February 2012 Mobile-home.png (file) 122 KB Screenshot of the mobile version of the Flashlight Wiki home page, taken on an iPod Touch 4G. 1
17:23, 11 February 2012 Mobile-menu.png (file) 114 KB Screenshot of the mobile version of the Flashlight Wiki showing the drop down menu. Taken on a iPod Touch 4G. 1
09:28, 18 February 2012 Baked-anodized-lights.jpg (file) 222 KB Three lights that were originally black, after being broiled in an oven at 500 degrees F for 30 minutes. The resulting color varies from one manufacturer to another, with the biggest tint shifts available from Type II anodizing, which is more common on bu 1
First pagePrevious pageNext pageLast page