User:Brted: Difference between revisions

Jump to navigation Jump to search
145 bytes removed ,  14 May 2011
Line 82: Line 82:
'''<U>KD 13.5mm Driver</U>''' No details to speak of, but this 5-mode driver could be useful in fixing AA lights with burned out drivers where standard 17mm drivers are too big [http://www.kaidomain.com/ProductDetails.aspx?ProductID=11063&AffiliateId=1890 KD]
'''<U>KD 13.5mm Driver</U>''' No details to speak of, but this 5-mode driver could be useful in fixing AA lights with burned out drivers where standard 17mm drivers are too big [http://www.kaidomain.com/ProductDetails.aspx?ProductID=11063&AffiliateId=1890 KD]


'''<U>NANJG 105</U>''' 8x7135 driver advertised at KD as 1100mA, but should be 2800mA. Seems similar to the Shiningbeam 2.8A driver, though Shiningbeam is now selling a slightly different version that appears to be a 106. I paired one of these with a MC-E and it was drawing more than 2 amps, though not 2.8. Also there was no mode memory and the Low had bad PWM. Mine may have been defective or I may have damaged it because of the positive and negative to the LED were shorted. [http://www.kaidomain.com/ProductDetails.aspx?ProductID=10995&AffiliateId=1890 KD]
'''<U>NANJG 105</U>''' 8x7135 driver advertised at KD as 1100mA, but should be 2800mA. Seems similar to the Shiningbeam 2.8A driver, though Shiningbeam is now selling a slightly different version that appears to be a 106. Has stars on the back so you can set mode groups. 5 modes by default but can be set to 3-mode L-M-H with memory. [http://www.kaidomain.com/ProductDetails.aspx?ProductID=10995&AffiliateId=1890 KD]


'''NANJG 112A''' 0.9-4.2V 1000mA driver from KD with stars on the back that can be soldered to provide different modes. Supposedly buck/boost with an inductor. Seems well-regulated since current draw increases as voltage of li-ion decreases, but current draw declines with voltage on 1.2V NiMH. Works with AA or li-ion, but with 2xAA the low-voltage warning will cause flashing. 3-mode grouping has low and medium pretty close together. Low mode does not seem to use PWM. [http://budgetlightforum.com/node/232 My Review] [http://www.kaidomain.com/ProductDetails.aspx?ProductId=10243&AffiliateId=1890 KD] (sold out)
'''NANJG 112A''' 0.9-4.2V 1000mA driver from KD with stars on the back that can be soldered to provide different modes. Supposedly buck/boost with an inductor. Seems well-regulated since current draw increases as voltage of li-ion decreases, but current draw declines with voltage on 1.2V NiMH. Works with AA or li-ion, but with 2xAA the low-voltage warning will cause flashing. 3-mode grouping has low and medium pretty close together. Low mode does not seem to use PWM. [http://budgetlightforum.com/node/232 My Review] [http://www.kaidomain.com/ProductDetails.aspx?ProductId=10243&AffiliateId=1890 KD] (sold out)
confirmed, developer
1,668

edits

Navigation menu